Could not perform end of disc-at-once CD burn failure with Nero 5.5.10.54 / WMP9

Below find full details of error log; succinctly I am trying to burn an audio CD with a few tracks ripped either via Nero 5.5.10.54 direct (write disk at once) or via WMP9 with Nero plug-in. Using Memorex 700MB 52X CDR media. Tried burning at 48 and 40X.

Only one success when using WMP9 and only one track (but isn’t this still disk at once?), if using a selection of tracks (held on HD)
I receive the following error which leads to the PC needing reboot (mouse irratic, sound delayed/jittering).

“Could not perform end of disc-at-once” as image attached.

Some pointers would be appreciated as I can’t seem to find a similar thread here (and if there is one - sorry! feel free to point to the obvious)

TIA
Stuart

Full error from WMP9 item at 10:18:45 appears to be the fault?

Windows XP 5.1

IA32

WinAspi: File ‘Wnaspi32.dll’: Ver=?.?.?.?, size=30208 bytes, created 11/06/1997 18:01:02

ahead WinASPI: File ‘C:\Program Files\ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 29/01/2003 22:37:36

Nero API version: 5.5.10.54

Using interface version: 5.5.10.5

Installed in: C:\Program Files\ahead\Nero\

Application: Ahead\Nero Fast CD-Burning Plug-in

Recorder: <MSI CD-RW MS-8348> Version: 120D - HA 1 TA 0 - 5.5.10.54

Adapter driver: <atapi> HA 1

Drive buffer : 2048kB

Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===

DiskPeripheral : Maxtor 6Y060L0 atapi Port 0 ID 0 DMA: On

CdRomPeripheral : MSI CD-RW MS-8348 atapi Port 1 ID 0 DMA: On

CdRomPeripheral : JLMS XJ-HD165H atapi Port 1 ID 1 DMA: On

=======================

AutoRun : 1

Excluded drive IDs:

CmdQueuing : 1

CmdNotification: 2

WriteBufferSize: 40894464 (0) Byte

ShowDrvBufStat : 0

EraseSpeed : 0

BUFE : 0

Physical memory : 255MB (261664kB)

Free physical memory: 69MB (71484kB)

Memory in use : 72 %

Uncached PFiles: 0x0

Use Static Write Speed Table: 0

Use Inquiry : 1

Global Bus Type: default (0)

Check supported media : Enabled (1)

23.11.2003

NeroAPI

10:16:49 #1 Phase 88 File APIProgress.cpp, Line 224

ExacLink activated

10:16:49 #2 Text 0 File Reader.cpp, Line 115

Reader running

10:16:49 #3 Text 0 File Writer.cpp, Line 125

Writer MSI      CD-RW MS-8348    running

10:16:49 #4 Text 0 File Burncd.cpp, Line 3769

Turn on Disc-At-Once, using CD-R/RW media

10:16:49 #5 Text 0 File ThreadedTransferInterface.cpp, Line 672

Setup items (original item values)

 0: TRM_AUDIO_NOPRE (16 Track 16.wma)

    2 indices, index0 (150) not provided

    original CD pos #0 + 14879 (14879) = #14879/3:18.29

    relocatable, CD pos for caching/writing not required/not required, no patch infos 

 1: TRM_AUDIO_NOPRE (13 Track 13.wma)

    2 indices, index0 (0) not provided

    original CD pos #0 + 13969 (13969) = #13969/3:6.19

    relocatable, CD pos for caching/writing not required/not required, no patch infos 

 2: TRM_AUDIO_NOPRE (08 Track 8.wma)

    2 indices, index0 (0) not provided

    original CD pos #0 + 15729 (15729) = #15729/3:29.54

    relocatable, CD pos for caching/writing not required/not required, no patch infos 

 3: TRM_AUDIO_NOPRE (14 Track 14.wma)

    2 indices, index0 (0) not provided

    original CD pos #0 + 19722 (19722) = #19722/4:22.72

    relocatable, CD pos for caching/writing not required/not required, no patch infos 

 4: TRM_AUDIO_NOPRE (02 Track 2.wma)

    2 indices, index0 (0) not provided

    original CD pos #0 + 15705 (15705) = #15705/3:29.30

    relocatable, CD pos for caching/writing not required/not required, no patch infos 

 5: TRM_AUDIO_NOPRE (01 Get The Party Started.wma)

    2 indices, index0 (0) not provided

    original CD pos #0 + 14399 (14399) = #14399/3:11.74

    relocatable, CD pos for caching/writing not required/not required, no patch infos 

--------------------------------------------------------------

10:16:49 #6 Text 0 File DlgWaitCD.cpp, Line 229

Last possible write address on media:   359848 (79:59.73)

Last address to be written:              94402 (21:00.52)

10:16:49 #7 Text 0 File DlgWaitCD.cpp, Line 234

Write in overburning mode: FALSE

10:16:49 #8 Text 0 File DlgWaitCD.cpp, Line 1703

Recorder: MSI CD-RW MS-8348;

   CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited

   ATIP Data:

     Special    Info [hex] 1: D0 00 20, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)

     Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

10:16:50 #9 Text 0 File ThreadedTransferInterface.cpp, Line 824

Prepare recorder MSI      CD-RW MS-8348    for write in cue-sheet-DAO

DAO infos:

==========

MCN: 

TOCTYPE: 0x0   Session Closed, CD fixated

Tracks 1 to 6:

   TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 0 352800 35348208

   TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 35348208 35348208 68203296

   TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 68203296 68203296 105197904

   TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 105197904 105197904 151584048

   TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 151584048 151584048 188522208

   TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 188522208 188522208 222388656

10:16:50 #10 Text 0 File ThreadedTransferInterface.cpp, Line 672

Setup items (after recorder preparation)

 0: TRM_AUDIO_NOPRE (16 Track 16.wma)

    2 indices, index0 (150) not provided

    original CD pos #0 + 14879 (14879) = #14879/3:18.29

    relocatable, CD pos for caching/writing not required/not required, no patch infos 

    -&gt; TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 14879 blocks [MSI      CD-RW MS-8348   ]

 1: TRM_AUDIO_NOPRE (13 Track 13.wma)

    2 indices, index0 (0) not provided

    original CD pos #0 + 13969 (13969) = #13969/3:6.19

    relocatable, CD pos for caching/writing not required/not required, no patch infos 

    -&gt; TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 13969 blocks [MSI      CD-RW MS-8348   ]

 2: TRM_AUDIO_NOPRE (08 Track 8.wma)

    2 indices, index0 (0) not provided

    original CD pos #0 + 15729 (15729) = #15729/3:29.54

    relocatable, CD pos for caching/writing not required/not required, no patch infos 

    -&gt; TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 15729 blocks [MSI      CD-RW MS-8348   ]

 3: TRM_AUDIO_NOPRE (14 Track 14.wma)

    2 indices, index0 (0) not provided

    original CD pos #0 + 19722 (19722) = #19722/4:22.72

    relocatable, CD pos for caching/writing not required/not required, no patch infos 

    -&gt; TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 19722 blocks [MSI      CD-RW MS-8348   ]

 4: TRM_AUDIO_NOPRE (02 Track 2.wma)

    2 indices, index0 (0) not provided

    original CD pos #0 + 15705 (15705) = #15705/3:29.30

    relocatable, CD pos for caching/writing not required/not required, no patch infos 

    -&gt; TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 15705 blocks [MSI      CD-RW MS-8348   ]

 5: TRM_AUDIO_NOPRE (01 Get The Party Started.wma)

    2 indices, index0 (0) not provided

    original CD pos #0 + 14399 (14399) = #14399/3:11.74

    relocatable, CD pos for caching/writing not required/not required, no patch infos 

    -&gt; TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 14399 blocks [MSI      CD-RW MS-8348   ]

--------------------------------------------------------------

10:16:50 #11 Phase 24 File APIProgress.cpp, Line 224

Caching of files started

10:16:50 #12 Phase 25 File APIProgress.cpp, Line 224

Caching of files completed

10:16:50 #13 Phase 36 File APIProgress.cpp, Line 224

Burn process started at 48x (7,200 KB/s)

10:16:50 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1978

Verifying CD position of item 0 (relocatable, no CD pos, no patch infos, orig at #0): write at #0

10:16:50 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1978

Verifying CD position of item 1 (relocatable, no CD pos, no patch infos, orig at #0): write at #14879

10:16:50 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1978

Verifying CD position of item 2 (relocatable, no CD pos, no patch infos, orig at #0): write at #28848

10:16:50 #17 Text 0 File ThreadedTransferInterface.cpp, Line 1978

Verifying CD position of item 3 (relocatable, no CD pos, no patch infos, orig at #0): write at #44577

10:16:50 #18 Text 0 File ThreadedTransferInterface.cpp, Line 1978

Verifying CD position of item 4 (relocatable, no CD pos, no patch infos, orig at #0): write at #64299

10:16:50 #19 Text 0 File ThreadedTransferInterface.cpp, Line 1978

Verifying CD position of item 5 (relocatable, no CD pos, no patch infos, orig at #0): write at #80004

10:16:50 #20 Text 0 File Mmc.cpp, Line 14598

StartDAO : CD-Text - On

10:16:50 #21 Text 0 File Mmc.cpp, Line 19092

Set BUFE: ExacLink -&gt; ON 

10:16:50 #22 Text 0 File Mmc.cpp, Line 14860

CueData, Len=72

21 00 00 41 00 00 00 00 

21 01 00 00 00 00 00 00 

21 01 01 00 00 00 02 00 

21 02 01 00 00 03 14 1d 

21 03 01 00 00 06 1a 30 

21 04 01 00 00 09 38 1b 

21 05 01 00 00 0e 13 18 

21 06 01 00 00 11 30 36 

01 aa 01 01 00 15 00 35 

10:18:05 #23 SCSI -500 File Cdrdrv.cpp, Line 1445

SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x01D20000

Status:     0x02 (0x03, SCSI_ABORTED)

HA-Status   0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)

TA-Status   0x00 (0x00, OK)

Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)

Sense Code: 0x26

Sense Qual: 0x02

CDB Data:   0x2A 0x00 0xFF 0xFF 0xD2 0x59 0x00 0x02 0xAA 0x00 0x00 0x00 

Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 

            0x00 0x00 0x00 0x00 0x26 0x02 

10:18:05 #24 Text 0 File Writer.cpp, Line 453

10:18:05.343 MSI      CD-RW MS-8348    : WriteBuffer reduced to 32768 Bytes

10:18:05 #25 Text 0 File Writer.cpp, Line 316

10:18:05.343 - MSI      CD-RW MS-8348    : Queue again later (Intervall : 9msec)

10:18:05 #26 Text 0 File Writer.cpp, Line 442

SCSI-Layer send CDRERR_BUFFER_TO_BIG to writer

10:18:05 #27 Text 0 File Writer.cpp, Line 453

10:18:05.546 MSI      CD-RW MS-8348    : WriteBuffer reduced to 30720 Bytes

10:18:05 #28 Text 0 File Writer.cpp, Line 453

10:18:05.968 MSI      CD-RW MS-8348    : WriteBuffer reduced to 28672 Bytes

10:18:06 #29 Text 0 File Writer.cpp, Line 453

10:18:06.171 MSI      CD-RW MS-8348    : WriteBuffer reduced to 26624 Bytes

10:18:06 #30 Text 0 File Writer.cpp, Line 453

10:18:06.390 MSI      CD-RW MS-8348    : WriteBuffer reduced to 24576 Bytes

10:18:06 #31 Text 0 File Writer.cpp, Line 453

10:18:06.593 MSI      CD-RW MS-8348    : WriteBuffer reduced to 22528 Bytes

10:18:07 #32 Text 0 File Writer.cpp, Line 453

10:18:07.015 MSI      CD-RW MS-8348    : WriteBuffer reduced to 20480 Bytes

10:18:07 #33 Text 0 File Writer.cpp, Line 453

10:18:07.218 MSI      CD-RW MS-8348    : WriteBuffer reduced to 18432 Bytes

10:18:07 #34 Text 0 File Writer.cpp, Line 453

10:18:07.437 MSI      CD-RW MS-8348    : WriteBuffer reduced to 16384 Bytes

10:18:07 #35 Text 0 File Writer.cpp, Line 453

10:18:07.656 MSI      CD-RW MS-8348    : WriteBuffer reduced to 14336 Bytes

10:18:08 #36 Text 0 File Writer.cpp, Line 453

10:18:08.062 MSI      CD-RW MS-8348    : WriteBuffer reduced to 12288 Bytes

10:18:08 #37 Text 0 File Writer.cpp, Line 453

10:18:08.281 MSI      CD-RW MS-8348    : WriteBuffer reduced to 10240 Bytes

10:18:08 #38 Text 0 File Writer.cpp, Line 453

10:18:08.484 MSI      CD-RW MS-8348    : WriteBuffer reduced to 8192 Bytes

10:18:08 #39 Text 0 File Writer.cpp, Line 453

10:18:08.703 MSI      CD-RW MS-8348    : WriteBuffer reduced to 6144 Bytes

10:18:09 #40 Text 0 File Writer.cpp, Line 453

10:18:09.125 MSI      CD-RW MS-8348    : WriteBuffer reduced to 4096 Bytes

10:18:09 #41 Text 0 File Writer.cpp, Line 453

10:18:09.328 MSI      CD-RW MS-8348    : WriteBuffer reduced to 2048 Bytes

10:18:09 #42 SCSI -500 File Cdrdrv.cpp, Line 1445

SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x01D20000

Status:     0x02 (0x03, SCSI_ABORTED)

HA-Status   0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)

TA-Status   0x00 (0x00, OK)

Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)

Sense Code: 0x26

Sense Qual: 0x02

CDB Data:   0x2A 0x00 0xFF 0xFF 0xD2 0x59 0x00 0x00 0x15 0x00 0x00 0x00 

Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 

            0x00 0x00 0x00 0x00 0x26 0x02 

10:18:09 #43 Text 0 File Writer.cpp, Line 446

Recorder-Buffer cannot be reduced any more

10:18:09 #44 CDR -500 File Writer.cpp, Line 333

SCSI/IDE Command aborted

10:18:09 #45 Text 0 File ThreadedTransfer.cpp, Line 222

all writers idle, stopping conversion

10:18:09 #46 Text 0 File ThreadedTransfer.cpp, Line 216

conversion idle, stopping reader

10:18:10 #47 SCSI -500 File Cdrdrv.cpp, Line 1241

SCSI Exec, HA 1, TA 0, LUN 0

Status:     0x02 (0x03, SCSI_ABORTED)

HA-Status   0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)

TA-Status   0x00 (0x00, OK)

Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)

Sense Code: 0x26

Sense Qual: 0x02

CDB Data:   0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 

Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 

            0x00 0x00 0x00 0x00 0x26 0x02 

10:18:10 #48 SCSI -500 File Cdrdrv.cpp, Line 1241

SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x018D5F78

Status:     0x02 (0x03, SCSI_ABORTED)

HA-Status   0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)

TA-Status   0x00 (0x00, OK)

Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)

Sense Code: 0x26

Sense Qual: 0x02

CDB Data:   0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00 

Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 

            0x00 0x00 0x00 0x00 0x26 0x02 

10:18:10 #49 CDR -500 File WriterStatus.cpp, Line 163

SCSI/IDE Command aborted

10:18:10 #50 TRANSFER -24 File WriterStatus.cpp, Line 163

Could not perform end of Disc-At-Once

10:18:11 #51 Phase 38 File APIProgress.cpp, Line 224

Burn process failed at 48x (7,200 KB/s)

10:18:11 #52 Text 0 File Scsicmd.cpp, Line 406

SCSI not using temporary buffers

20 out of 20 temporary buffers allocated

10:18:33 #53 SCSI -500 File Cdrdrv.cpp, Line 1241

SCSI Exec, HA 1, TA 0, LUN 0

Status:     0x02 (0x03, SCSI_ABORTED)

HA-Status   0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)

TA-Status   0x00 (0x00, OK)

Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)

Sense Code: 0x26

Sense Qual: 0x02

CDB Data:   0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 

Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 

            0x00 0x00 0x00 0x00 0x26 0x02 

10:18:34 #54 SCSI -500 File Cdrdrv.cpp, Line 1241

SCSI Exec, HA 1, TA 0, LUN 0

Status:     0x02 (0x03, SCSI_ABORTED)

HA-Status   0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)

TA-Status   0x00 (0x00, OK)

Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)

Sense Code: 0x26

Sense Qual: 0x02

CDB Data:   0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 

Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 

            0x00 0x00 0x00 0x00 0x26 0x02 

10:18:34 #55 CDR -500 File BurnCDUtil.h, Line 175

SCSI/IDE Command aborted

10:18:45 #56 SCSI -500 File Cdrdrv.cpp, Line 1241

SCSI Exec, HA 1, TA 0, LUN 0

Status:     0x02 (0x03, SCSI_ABORTED)

HA-Status   0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)

TA-Status   0x00 (0x00, OK)

Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)

Sense Code: 0x26

Sense Qual: 0x02

CDB Data:   0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 

Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 

            0x00 0x00 0x00 0x00 0x26 0x02 

10:18:46 #57 SCSI -500 File Cdrdrv.cpp, Line 1241

SCSI Exec, HA 1, TA 0, LUN 0

Status:     0x02 (0x03, SCSI_ABORTED)

HA-Status   0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)

TA-Status   0x00 (0x00, OK)

Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)

Sense Code: 0x26

Sense Qual: 0x02

CDB Data:   0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 

Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 

            0x00 0x00 0x00 0x00 0x26 0x02 

10:19:14 #58 SCSI -500 File Cdrdrv.cpp, Line 1241

SCSI Exec, HA 1, TA 0, LUN 0

Status:     0x02 (0x03, SCSI_ABORTED)

HA-Status   0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)

TA-Status   0x00 (0x00, OK)

Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)

Sense Code: 0x26

Sense Qual: 0x02

CDB Data:   0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 

Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 

            0x00 0x00 0x00 0x00 0x26 0x02 

10:19:14 #59 SCSI -500 File Cdrdrv.cpp, Line 1241

SCSI Exec, HA 1, TA 0, LUN 0

Status:     0x02 (0x03, SCSI_ABORTED)

HA-Status   0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)

TA-Status   0x00 (0x00, OK)

Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)

Sense Code: 0x26

Sense Qual: 0x02

CDB Data:   0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 

Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 

            0x00 0x00 0x00 0x00 0x26 0x02 

10:19:14 #60 CDR -500 File BurnCDUtil.h, Line 175

SCSI/IDE Command aborted

10:19:42 #61 SCSI -500 File Cdrdrv.cpp, Line 1241

SCSI Exec, HA 1, TA 0, LUN 0

Status:     0x02 (0x03, SCSI_ABORTED)

HA-Status   0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)

TA-Status   0x00 (0x00, OK)

Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)

Sense Code: 0x26

Sense Qual: 0x02

CDB Data:   0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 

Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 

            0x00 0x00 0x00 0x00 0x26 0x02 

10:19:42 #62 SCSI -500 File Cdrdrv.cpp, Line 1241

SCSI Exec, HA 1, TA 0, LUN 0

Status:     0x02 (0x03, SCSI_ABORTED)

HA-Status   0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)

TA-Status   0x00 (0x00, OK)

Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)

Sense Code: 0x26

Sense Qual: 0x02

CDB Data:   0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 

Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 

            0x00 0x00 0x00 0x00 0x26 0x02 

10:19:42 #63 CDR -500 File BurnCDUtil.h, Line 175

SCSI/IDE Command aborted

10:20:04 #64 SCSI -500 File Cdrdrv.cpp, Line 1241

SCSI Exec, HA 1, TA 0, LUN 0

Status:     0x02 (0x03, SCSI_ABORTED)

HA-Status   0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)

TA-Status   0x00 (0x00, OK)

Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)

Sense Code: 0x26

Sense Qual: 0x02

CDB Data:   0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 

Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 

            0x00 0x00 0x00 0x00 0x26 0x02 

10:20:05 #65 SCSI -500 File Cdrdrv.cpp, Line 1241

SCSI Exec, HA 1, TA 0, LUN 0

Status:     0x02 (0x03, SCSI_ABORTED)

HA-Status   0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)

TA-Status   0x00 (0x00, OK)

Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)

Sense Code: 0x26

Sense Qual: 0x02

CDB Data:   0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 

Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 

            0x00 0x00 0x00 0x00 0x26 0x02 

10:20:05 #66 CDR -500 File BurnCDUtil.h, Line 175

SCSI/IDE Command aborted

Existing drivers:

File ‘Drivers\CDRALW2K.SYS’: Ver=5.3.2.34, size=23420 bytes, created 21/09/2003 14:57:39

Registry Keys:

HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

:frowning: :frowning:

While you’re reading this, I’ll read that log :wink:

Just quickly: What is your OS? Have you installed Adaptec’s ASPI? Have you installed the Adaptec Plugin for WMP?

File caching failed and there was a buffer underrun that blew the write. One track worked because the buffer worked. It wasn’t gonna cache with only 69MB free! You had only 69MB of RAM free out of 256. It should still work but you may have a lot going on - background apps and processes. Got XP? Add more RAM or free up some physical memory by turning some things off.

Try Nero again. Choose Audio disc and choose an 8x speed for the burn - let’s see if you can avoid the buffer underrun.

FutureProof

Many thanks - I had read the detailed page (Honest!) and checked DMA etc…

I thought I’d killed background apps, but ClimatePrediction.net is installed as a Service under WinXP Home - thus it started again and I didn’t notice, hence memory hog at time of burning.

After reboot, I shut down everything (firewall, AV and broadband connection etc) and used Nero to try to burn again. Lowest setting possible was 12X, but that did the trick.

(Had an error via WMP9 but I’ll look into that when I’ve time)

Your help and time much appreciated, by me, and 6 year old for whom the music is needed for her party!

Stuart :slight_smile:

I have almost the same problem. I got XP OS, better here is the log file:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead
ero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A103 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVDRAM GSA-4163B>Version: A103 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y060L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LG CD-ROM CRD-8522B atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
LG CD-ROM CRD-8522B E: CDRom0
HL-DT-ST DVDRAM GSA-4163 G: CDRom1
Generic DVD-ROM F: CDRom2
AXV CD/DVD-ROM H: CDRom3

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523764kB)
Free physical memory: 244MB (249880kB)
Memory in use : 52 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

25.8.2005
ISO compilation
7:31:08 PM #1 Text 0 File Isodoc.cpp, Line 6172
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

7:31:08 PM #2 Text 0 File Reader.cpp, Line 127
Reader running

7:31:08 PM #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4163B running

7:31:08 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

7:31:08 PM #5 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

7:31:09 PM #6 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 356319 ( 79:10.69, 695MB)

7:31:09 PM #7 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)

7:31:09 PM #8 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193

7:31:09 PM #9 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================

7:31:09 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 356320 (356320) = #356320/79:10.70
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 356320 blocks [HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------

7:31:09 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 729743360, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
356320 | lead-out | 1 | 0x41 | 0x00

7:31:09 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

7:31:09 PM #13 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

7:31:09 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

7:31:09 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)

7:31:09 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

7:31:09 PM #17 Text 0 File DVDR.cpp, Line 2194
Recording mode: Sequential Recording Mode

7:31:09 PM #18 Text 0 File Mmc.cpp, Line 21235
Set BUFE: Buffer underrun protection -> ON

7:31:09 PM #19 Text 0 File DVDR.cpp, Line 2340
Start write address at LBA 0
DVD high compatibility mode: Yes

7:31:09 PM #20 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16…63]:
00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0…
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

7:31:09 PM #21 Text 0 File DVDR.cpp, Line 4842
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request [LG]: DVD-ROM
Book Type setting not supported for the loaded disc type

7:31:36 PM #22 SCSI -1135 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x099A0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x32 0x4D 0x00 0x0C 0x0C 0x00

7:31:36 PM #23 CDR -1135 File Writer.cpp, Line 311
Write error

7:31:36 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

7:31:36 PM #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

7:31:36 PM #26 Text 0 File DVDR.cpp, Line 2603
EndDAO: Last written address was -1

7:31:36 PM #27 Text 0 File DVDR.cpp, Line 4842
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request [LG]: DVD+R
Book Type setting not supported for the loaded disc type

7:31:36 PM #28 CDR -1135 File WriterStatus.cpp, Line 167
Write error

7:31:36 PM #29 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

7:31:36 PM #30 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11,080 KB/s)

Existing drivers:
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.28a, size=20640 bytes, created 3/12/2005 1:28:14 AM (Prassi/Veritas driver for win 2K)
File ‘Drivers\InCDfs.SYS’: Ver=4, 2, 12, 1, size=91136 bytes, created 9/7/2004 4:27:22 PM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDpass.SYS’: Ver=4, 2, 12, 1, size=28544 bytes, created 9/7/2004 4:27:38 PM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDrec.SYS’: Ver=4, 2, 12, 1, size=5760 bytes, created 9/7/2004 4:29:08 PM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\atapi.sys’: Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:07:00 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Please help me out. I use Memorex DVD-R 4.7GB. I have read that memorex is bad to use but now that I have them I want to be sure that the problem is the dvds and not my computer.

Thanks.

I have updated the firmware(had A103 now A105>is out) and nero(had 6.6.0.6 now is out 6.6.0.16) and uninstalled InCD. Worked to brun even MEMOREX which are so bad ! I’ll buy from now on good media like TDK or VERBS.

Cya. Thanks for no help but I got help from afterdawn.com >> http://forums.afterdawn.com/thread_view.cfm/1/225006

I HAVE A NEC 3450A DVD BURNER AND I AM USING NERO 6
(USING MEMOREX DVD+R MEDIA) AND EVERYTIME I TRY TO BURN A DVD MOVIE
( COPYRIGHT IS OFF ITS BEEN CONVERTED USING WINAVI TO DVD FORMAT FROM A MOVIE I DOWNLOADED OFF THE INTERNET ) ANYWAYS… EVERYTIME I START THE BURN AT 4X SPEED (NOTE I DON’T HAVE THE OPTION OF GOING LOWER) IT GIVES ME THIS ERROR
"could not perform end of DISK-AT-ONCE"
Burn process faile at 4x

what does this mean my firmware is up to date and i have recorded on crappier media before please please please need answers can someone help me …ill look for a response to my plea for help to fix my dvd burner :frowning:

MY LOG
N/A
N/A
1A20-020E-0000-1349-1210-6697*

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Nero6
ero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.12 (Nero Express)
Recorder: <_NEC DVD±RW ND-3450A> Version: 103C - HA 1 TA 0 - 6.3.1.12
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <_NEC DVD±RW ND-3450A>Version: 103C - HA 1 TA 0 - 6.3.1.12
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST320011A atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD136AA atapi Port 0 ID 1 DMA: Off
CdRomPeripheral : _NEC DVD±RW ND-3450A atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
_NEC DVD±RW ND-3450A E: CDRom0

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 253MB (260084kB)
Free physical memory: 40MB (41396kB)
Memory in use : 84 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

15.3.2007
UDF/ISO compilation
1:31:02 AM #1 Phase 112 File dlgbrnst.cpp, Line 1836
DVD-Video files reallocation started

1:31:02 AM #2 Phase 114 File dlgbrnst.cpp, Line 1836
DVD-Video files reallocation completed (no file modified)

1:31:02 AM #3 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

1:31:02 AM #4 Phase 111 File dlgbrnst.cpp, Line 1836
DVD-Video files sorted

1:31:02 AM #5 Text 0 File Reader.cpp, Line 118
Reader running

1:31:02 AM #6 Text 0 File Writer.cpp, Line 124
Writer _NEC DVD±RW ND-3450A running

1:31:02 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

1:31:03 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

1:31:03 AM #9 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-at-once, using DVD media

1:31:03 AM #10 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 835855 (185:44.55, 1632MB)

1:31:03 AM #11 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)

1:31:03 AM #12 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: _NEC DVD±RW ND-3450A, Media type: DVD+R

1:31:03 AM #13 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================

1:31:03 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 835856 (835856) = #835856/185:44.56
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 835856 blocks [_NEC DVD±RW ND-3450A]
--------------------------------------------------------------

1:31:03 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [_NEC DVD±RW ND-3450A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1711833088, ISRC ""
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
835856 | lead-out | 1 | 0x00 | 0x41

1:31:04 AM #16 Phase 24 File dlgbrnst.cpp, Line 1836
Caching of files started

1:31:04 AM #17 Text 0 File Burncd.cpp, Line 4177
Cache writing successful.

1:31:04 AM #18 Phase 25 File dlgbrnst.cpp, Line 1836
Caching of files completed

1:31:04 AM #19 Phase 36 File dlgbrnst.cpp, Line 1836
Burn process started at 4x (5,540 KB/s)

1:31:04 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

1:31:04 AM #21 SCSI -1066 File Cdrdrv.cpp, Line 1187
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x034D6000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

1:31:04 AM #22 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 5:34,109 (334109ms) -> OK

1:31:04 AM #23 Text 0 File DVDPlusRW.cpp, Line 606
Start write address at LBA 0
DVD high compatibility mode: Yes

1:31:37 AM #24 SCSI -1135 File Cdrdrv.cpp, Line 1441
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x073E0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x0A 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

1:31:37 AM #25 CDR -1135 File Writer.cpp, Line 304
Write error

1:31:37 AM #26 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

1:31:38 AM #27 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

1:31:38 AM #28 SCSI -1135 File Cdrdrv.cpp, Line 1187
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

1:31:38 AM #29 SCSI -1176 File Cdrdrv.cpp, Line 1187
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x03

1:31:38 AM #30 Phase 127 File dlgbrnst.cpp, Line 1836
Generating DVD high compatibility borders

1:31:38 AM #31 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

1:31:38 AM #32 CDR -1135 File WriterStatus.cpp, Line 164
Write error
_NEC DVD±RW ND-3450A\H1 T0

1:31:38 AM #33 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once

1:31:38 AM #34 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

1:31:38 AM #35 Phase 38 File dlgbrnst.cpp, Line 1836
Burn process failed at 4x (5,540 KB/s)

Existing drivers:
File ‘Drivers\CDRALW2K.SYS’: Ver=8.0.0.212 , size=2560 bytes, created 1/30/2007 12:03:36 AM
File ‘Drivers\PXHELP20.SYS’: Ver=3.00.43J, size=36624 bytes, created 1/30/2007 12:03:36 AM (Prassi/Veritas driver for win 2K)
File ‘Drivers\atapi.sys’: Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

OH BY THE WAY HERE IS MY LOG FROM BLAKLINKIN

N/A
N/A
1A20-020E-0000-1349-1210-6697*

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Nero6
ero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.12 (Nero Express)
Recorder: <_NEC DVD±RW ND-3450A> Version: 103C - HA 1 TA 0 - 6.3.1.12
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <_NEC DVD±RW ND-3450A>Version: 103C - HA 1 TA 0 - 6.3.1.12
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST320011A atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD136AA atapi Port 0 ID 1 DMA: Off
CdRomPeripheral : _NEC DVD±RW ND-3450A atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
_NEC DVD±RW ND-3450A E: CDRom0

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 253MB (260084kB)
Free physical memory: 40MB (41396kB)
Memory in use : 84 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

15.3.2007
UDF/ISO compilation
1:31:02 AM #1 Phase 112 File dlgbrnst.cpp, Line 1836
DVD-Video files reallocation started

1:31:02 AM #2 Phase 114 File dlgbrnst.cpp, Line 1836
DVD-Video files reallocation completed (no file modified)

1:31:02 AM #3 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

1:31:02 AM #4 Phase 111 File dlgbrnst.cpp, Line 1836
DVD-Video files sorted

1:31:02 AM #5 Text 0 File Reader.cpp, Line 118
Reader running

1:31:02 AM #6 Text 0 File Writer.cpp, Line 124
Writer _NEC DVD±RW ND-3450A running

1:31:02 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

1:31:03 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

1:31:03 AM #9 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-at-once, using DVD media

1:31:03 AM #10 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 835855 (185:44.55, 1632MB)

1:31:03 AM #11 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)

1:31:03 AM #12 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: _NEC DVD±RW ND-3450A, Media type: DVD+R

1:31:03 AM #13 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================

1:31:03 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 835856 (835856) = #835856/185:44.56
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 835856 blocks [_NEC DVD±RW ND-3450A]
--------------------------------------------------------------

1:31:03 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [_NEC DVD±RW ND-3450A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1711833088, ISRC ""
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
835856 | lead-out | 1 | 0x00 | 0x41

1:31:04 AM #16 Phase 24 File dlgbrnst.cpp, Line 1836
Caching of files started

1:31:04 AM #17 Text 0 File Burncd.cpp, Line 4177
Cache writing successful.

1:31:04 AM #18 Phase 25 File dlgbrnst.cpp, Line 1836
Caching of files completed

1:31:04 AM #19 Phase 36 File dlgbrnst.cpp, Line 1836
Burn process started at 4x (5,540 KB/s)

1:31:04 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

1:31:04 AM #21 SCSI -1066 File Cdrdrv.cpp, Line 1187
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x034D6000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

1:31:04 AM #22 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 5:34,109 (334109ms) -> OK

1:31:04 AM #23 Text 0 File DVDPlusRW.cpp, Line 606
Start write address at LBA 0
DVD high compatibility mode: Yes

1:31:37 AM #24 SCSI -1135 File Cdrdrv.cpp, Line 1441
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x073E0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x0A 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

1:31:37 AM #25 CDR -1135 File Writer.cpp, Line 304
Write error

1:31:37 AM #26 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

1:31:38 AM #27 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

1:31:38 AM #28 SCSI -1135 File Cdrdrv.cpp, Line 1187
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

1:31:38 AM #29 SCSI -1176 File Cdrdrv.cpp, Line 1187
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x03

1:31:38 AM #30 Phase 127 File dlgbrnst.cpp, Line 1836
Generating DVD high compatibility borders

1:31:38 AM #31 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

1:31:38 AM #32 CDR -1135 File WriterStatus.cpp, Line 164
Write error
_NEC DVD±RW ND-3450A\H1 T0

1:31:38 AM #33 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once

1:31:38 AM #34 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

1:31:38 AM #35 Phase 38 File dlgbrnst.cpp, Line 1836
Burn process failed at 4x (5,540 KB/s)

Existing drivers:
File ‘Drivers\CDRALW2K.SYS’: Ver=8.0.0.212 , size=2560 bytes, created 1/30/2007 12:03:36 AM
File ‘Drivers\PXHELP20.SYS’: Ver=3.00.43J, size=36624 bytes, created 1/30/2007 12:03:36 AM (Prassi/Veritas driver for win 2K)
File ‘Drivers\atapi.sys’: Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)