Could not perform end of disc-at-once - burn process failed at 16x

[qanda]This thread is about the Lite-On DVD RECORDER DVD±R RW. Click here to see full specs[/qanda]I am having issues burning DVD video with my DVD BURNER LITE-ON - IHAS324-08 RT. It was manufactured just 2 months ago, so the firmware should be up to date. I have tried using TDK DVD+R and Office Max brand media, Both with the same result. I am not sure if it is media, software, or hardware. I am using Nero v. 9.0.9.4. For some reason, when I open Nero, it hangs for a minute or 2 before it opens. During this time, virtually no resources are being used. This also occurs with a couple other unrelated programs, but only started happening when I installed my new LiteOn SATA Burner. Once the software opens, everything runs fine. With Nero, I have made several coasters. Everything works great up until it is about to finalize and then it fails. I need help trying to figure out what my issue is. Thanks in advance! Here is my last log:


Windows Vista 6.0
IA32
WinAspi: -

NT-SPTI used
Nero Version: 9.0.9.100
Internal Version: 9, 0, 9, 100

Recorder:             <ATAPI iHAS324   A>       Version: BL1A - HA 1 TA 0 - 9.0.9.100
 Adapter driver:      <Serial ATA>              HA 1
 Drive buffer  :      2048kB
 Bus Type      :      via Inquiry data
 Connected to MMC as unknown drive with class-nr : 1
 Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM:               <TOSHIBA  DVD-ROM SD-M1612>Version: 1004 - HA 1 TA 1 - 9.0.9.100
 Adapter driver:      <IDE>                     HA 1

=== Scsi-Device-Map ===
                     : ATAPI   iHAS324   A     BL1A   vsmraid Port 2 ID 0  DMA: Off

=== CDRom-Device-Map ===
ATAPI iHAS324   A          G:   CdRom0
TOSHIBA DVD-ROM SD-M1612   E:   CdRom1
_NEC DVD_RW ND-2500A       F:   CdRom2
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
BUFE           : 0
Physical memory     : 2046MB (2095192kB)
Free physical memory: 934MB (956928kB)
Memory in use       : 54 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

5.6.2009
UDF/ISO compilation
4:05:20 PM	#1 SPTI -500 File SCSIPassThrough.cpp, Line 215
	CdRom0: SCSIStatus(x00) WinError(31) NeroError(-500)
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	Buffer x055a0dc0: Len x804
	
4:05:20 PM	#2 SPTI -500 File SCSIPassThrough.cpp, Line 215
	CdRom0: SCSIStatus(x00) WinError(31) NeroError(-500)
	CDB Data:   0x00 00 00 00 00 00 00 00 00 00 00 00 
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	
4:05:20 PM	#3 SPTI -500 File SCSIPassThrough.cpp, Line 215
	CdRom0: SCSIStatus(x00) WinError(31) NeroError(-500)
	CDB Data:   0x00 00 00 00 00 00 00 00 00 00 00 00 
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	
4:05:21 PM	#4 SPTI -500 File SCSIPassThrough.cpp, Line 215
	CdRom0: SCSIStatus(x00) WinError(31) NeroError(-500)
	CDB Data:   0x00 00 00 00 00 00 00 00 00 00 00 00 
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	
4:05:21 PM	#5 SPTI -500 File SCSIPassThrough.cpp, Line 215
	CdRom0: SCSIStatus(x00) WinError(31) NeroError(-500)
	CDB Data:   0x00 00 00 00 00 00 00 00 00 00 00 00 
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	
5:55:38 PM	#6 Text 0 File SCSIPTICommands.cpp, Line 450
	LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	
5:55:39 PM	#7 Phase 112 File dlgbrnst.cpp, Line 1767
	DVD-Video files reallocation started
	
5:55:40 PM	#8 Phase 114 File dlgbrnst.cpp, Line 1767
	DVD-Video files reallocation completed (no file modified)
	
5:55:40 PM	#9 Text 0 File Isodoc.cpp, Line 6789
	UDF document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : TRUE
	Multisession            : FALSE
	Burning mode            : DAO
	Mode                    : 1
	UDF Mode                : UDF/ISO bridge
	UDF Options             : automatic
	UDF Revision            : 1.02
	UDF Partition Type      : physical
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  : FALSE
	Allow pathdepth more than 8 directories : FALSE
	Allow more than 255 characters in path  : FALSE
	Write ISO9660 ;1 file extensions        : TRUE
	
5:55:40 PM	#10 Phase 111 File dlgbrnst.cpp, Line 1767
	DVD-Video files sorted
	
5:55:40 PM	#11 ISO9660GEN -11 File Geniso.cpp, Line 3349
	First writeable address = 0 (0x00000000)
	
5:55:40 PM	#12 ISO9660GEN -11 File Geniso.cpp, Line 3349
	First writeable address = 0 (0x00000000)
	
5:55:40 PM	#13 SPTI -500 File SCSIPassThrough.cpp, Line 215
	CdRom0: SCSIStatus(x00) WinError(31) NeroError(-500)
	CDB Data:   0x51 00 00 00 00 00 00 00 20 00 00 00 
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	Buffer x055d5940: Len x20
	
5:55:40 PM	#14 SPTI -500 File SCSIPassThrough.cpp, Line 215
	CdRom0: SCSIStatus(x00) WinError(31) NeroError(-500)
	CDB Data:   0x51 00 00 00 00 00 00 00 20 00 00 00 
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	Buffer x055d5940: Len x20
	
5:55:40 PM	#15 Text 0 File Burncd.cpp, Line 3563
	Turn on Disc-At-Once, using DVD media
	
5:55:40 PM	#16 SPTI -500 File SCSIPassThrough.cpp, Line 215
	CdRom0: SCSIStatus(x00) WinError(31) NeroError(-500)
	CDB Data:   0x52 01 00 00 00 FF 00 00 20 00 00 00 
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	Buffer x055d5940: Len x20
	
5:55:40 PM	#17 Text 0 File FilesystemSettingsValidator.cpp, Line 142
	FS Settings: using validator 'CUDFSettingsValidatorDVD'
	ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
	Changing UDF revision from '1.02' to '1.02'
	
5:55:40 PM	#18 ISO9660GEN -11 File Geniso.cpp, Line 3349
	First writeable address = 0 (0x00000000)
	
5:55:40 PM	#19 ISO9660GEN -11 File Geniso.cpp, Line 3349
	First writeable address = 0 (0x00000000)
	
5:55:40 PM	#20 SPTI -500 File SCSIPassThrough.cpp, Line 215
	CdRom0: SCSIStatus(x00) WinError(31) NeroError(-500)
	CDB Data:   0x52 01 00 00 00 01 00 00 24 00 00 00 
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	Buffer x0559f940: Len x24
	
5:55:40 PM	#21 Text 0 File DlgWaitCD.cpp, Line 312
	Last possible write address on media:  2295103 (510:01.28, 4482MB)
	Last address to be written:            2202591 (489:27.66, 4301MB)
	
5:55:40 PM	#22 Text 0 File DlgWaitCD.cpp, Line 324
	Write in overburning mode: NO (enabled: CD)
	
5:55:41 PM	#23 Text 0 File DlgWaitCD.cpp, Line 2951
	Recorder: ATAPI iHAS324   A, Media type: DVD+R
	
5:55:41 PM	#24 Text 0 File DlgWaitCD.cpp, Line 499
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
5:55:41 PM	#25 Text 0 File ThreadedTransferInterface.cpp, Line 756
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 2202592 (2202592) = #2202592/489:27.67
	    relocatable, disc pos for caching/writing not required/ required
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202592 blocks [G: ATAPI iHAS324   A]
	--------------------------------------------------------------
	
5:55:41 PM	#26 SPTI -500 File SCSIPassThrough.cpp, Line 215
	CdRom0: SCSIStatus(x00) WinError(31) NeroError(-500)
	CDB Data:   0x00 00 00 00 00 00 00 00 00 00 00 00 
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	
5:55:41 PM	#27 SPTI -500 File SCSIPassThrough.cpp, Line 215
	CdRom0: SCSIStatus(x00) WinError(31) NeroError(-500)
	CDB Data:   0x00 00 00 00 00 00 00 00 00 00 00 00 
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	
5:55:41 PM	#28 Text 0 File ThreadedTransferInterface.cpp, Line 958
	Prepare [G: ATAPI iHAS324   A] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:                                  Idx 0         Idx 1      Next Trk
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4510908416, ISRC ""
	DAO layout:
	===========
	 ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
	        0 |  lead-in |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   1 |    0x41 |  2202592 |        0 | 0x00
	  2202592 | lead-out |   1 |    0x41 |        0 |        0 | 0x00
	
5:55:46 PM	#29 Text 0 File SCSIPTICommands.cpp, Line 264
	Error on LockVolume: Access is denied.

	
5:55:46 PM	#30 Text 0 File SCSIPTICommands.cpp, Line 287
	SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
	
5:58:26 PM	#31 Text 0 File SCSIPTICommands.cpp, Line 240
	SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
	
5:58:26 PM	#32 Text 0 File Burncd.cpp, Line 4362
	Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
	
5:58:26 PM	#33 Phase 24 File dlgbrnst.cpp, Line 1767
	Caching of files started
	
5:58:26 PM	#34 Text 0 File Burncd.cpp, Line 4484
	Cache writing successful.
	
5:58:26 PM	#35 Phase 25 File dlgbrnst.cpp, Line 1767
	Caching of files completed
	
5:58:26 PM	#36 Phase 36 File dlgbrnst.cpp, Line 1767
	Burn process started at 16x (22,160 KB/s)
	
5:58:26 PM	#37 Text 0 File ThreadedTransferInterface.cpp, Line 2675
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
5:58:26 PM	#38 Text 0 File Cdrdrv.cpp, Line 10187
	---- Disc Structure: Physical Format Information (00h) ----
	Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD+R (10), Part Version: 1.0x (1)
	 Disc Size: 120 mm,      Maximum Transfer Rate: <not specified> (F h)
	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:          26053F h
	 Data in Burst Cutting Area (BCA) does not exist
	  Disc Application Code: 0 / 0 h
	  Extended Information indicators: 7 h
	  Disc Manufacturer ID: CMC.MAG.
	  Media type ID: M01
	  Product revision number: 0
	  Number of Physical format information bytes in use in ADIP up to byte 63: 56
	 Media Specific [16..783]:
	    00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38    ...CMC.MAG.M01.8
	    23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08    #T7..>n.pb......
	    01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00    ................
	    01 00 38 38 00 1D 62 35 - 07 30 22 10 08 20 1C 01    ..88..b5.0".....
	    00 00 00 1D 62 35 07 30 - 22 10 08 20 1C 01 00 00    ....b5.0".......
	    02 00 54 70 02 38 5F 56 - 20 14 0B 0B 01 18 00 00    ..Tp.8_V........
	    00 00 02 3D 5D 7A 20 14 - 0C 0A 01 18 00 00 00 10    ...=]z..........
	    03 00 54 DF 02 1F 65 5A - 20 14 0C 0A 01 18 00 00    ..T...eZ........
	    00 00 02 06 67 86 20 14 - 0C 0A 01 18 00 00 00 89    ....g...........
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	
5:58:26 PM	#39 SPTI -500 File SCSIPassThrough.cpp, Line 215
	CdRom0: SCSIStatus(x00) WinError(31) NeroError(-500)
	CDB Data:   0x00 00 00 00 00 00 00 00 00 00 00 00 
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	
5:58:26 PM	#40 SPTI -500 File SCSIPassThrough.cpp, Line 215
	CdRom0: SCSIStatus(x00) WinError(1117) NeroError(-500)
	CDB Data:   0xAC 00 00 00 00 00 00 00 00 64 00 00 
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	Buffer x055eb7c0: Len x648
	
5:58:26 PM	#41 Text 0 File DVDPlusRW.cpp, Line 675
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
5:58:26 PM	#42 Text 0 File ThreadedTransfer.cpp, Line 273
	Pipe memory size 83836800
	
6:03:50 PM	#43 Text 0 File WriterStatus.cpp, Line 245
	<G: ATAPI iHAS324   A> start writing Lead-Out at LBA 2202592 (219BE0h), length 0 blocks
	
6:03:50 PM	#44 SPTI -500 File SCSIPassThrough.cpp, Line 215
	CdRom0: SCSIStatus(x00) WinError(1117) NeroError(-500)
	CDB Data:   0x00 00 00 00 00 00 00 00 00 00 00 00 
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	
6:03:50 PM	#45 SPTI -500 File SCSIPassThrough.cpp, Line 215
	CdRom0: SCSIStatus(x00) WinError(1117) NeroError(-500)
	CDB Data:   0x5B 01 06 00 00 00 00 00 00 00 00 00 
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	
6:03:50 PM	#46 Text 0 File DVDPlusRW.cpp, Line 943
	EndDAO: Last written address 2202592
	
6:03:50 PM	#47 CDR -500 File ThreadedTransferInterface.cpp, Line 1822
	SCSI command aborted
	G: ATAPI iHAS324   A
	
6:03:50 PM	#48 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1822
	Could not perform end of Disc-at-once
	
6:03:50 PM	#49 SPTI -500 File SCSIPassThrough.cpp, Line 215
	CdRom0: SCSIStatus(x00) WinError(1117) NeroError(-500)
	CDB Data:   0x55 10 00 00 00 00 00 00 3C 00 00 00 
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	Buffer x055a2800: Len x3c
	0x00 00 00 00 00 00 00 00 05 32 01 C4 08 00 00 00 
	0x00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	
6:03:50 PM	#50 Text 0 File DVDPlusDualLayer.cpp, Line 1424
	SetDriveCaps: Set LAST LBA of layer 1 to 0
	
6:03:51 PM	#51 Phase 38 File dlgbrnst.cpp, Line 1767
	Burn process failed at 16x (22,160 KB/s)
	
6:03:54 PM	#52 Text 0 File SCSIPTICommands.cpp, Line 287
	SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
	
6:04:04 PM	#53 SPTI -500 File SCSIPassThrough.cpp, Line 215
	CdRom0: SCSIStatus(x00) WinError(1117) NeroError(-500)
	CDB Data:   0x1B 00 00 00 02 00 00 00 00 00 00 00 
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	
6:04:26 PM	#54 SPTI -500 File SCSIPassThrough.cpp, Line 215
	CdRom0: SCSIStatus(x00) WinError(1117) NeroError(-500)
	CDB Data:   0x1B 00 00 00 02 00 00 00 00 00 00 00 
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	
6:04:26 PM	#55 Text 0 File Cdrdrv.cpp, Line 11444
	DriveLocker: UnLockVolume completed
	
6:04:26 PM	#56 Text 0 File SCSIPTICommands.cpp, Line 450
	UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon

For starters:

: ATAPI iHAS324 A BL1A vsmraid Port 2 ID 0 DMA: Off

Enable DMA.

Burn process started at 16x (22,160 KB/s)

Slow down your burn speed

I have tried burning at 8x and get the same result. It has no trouble burning, it just seems to have issues finalizing.

As far as the DMA goes, under both IDE Channel controllers, Enable DMA is checked… is there somewhere else I need to check? Thanks!

You’re burn log is showing it as off. Uninstall the primary and secondary channel then reboot. It should automatically reset your DMA.

Try burning again after that and post another log if you run into other issues.

Will do

Okay… I rebooted and this time, under IDA/ATA/ATAPI Controllers, ATA Channel 0 and 1 are listed. Before they were both just listed with the same name (no 0 or 1). They still both have “Enable DMA” checked. I tried burning again and it still fails at finalization. I also tried burning the files with DVDFab v. 6.0.1.0 and got a “Task_2 Failed! Error=115” - another finalization error. I tried to play the disk to verify that it is not a false error, and it does not play. Any ideas from here?

[I]@ biojoe2[/I]. :slight_smile:
In this case Nero log is useless. Please share the info of your mobo/controller used, more specific; what type of sata controller is drive connected to?
Also make sure this controller runs in IDE compatibility mode, (you can check this in bios).
BTW, nice to see you still have a NEC-2500 in your box. :flower:

@ 7thSinger :slight_smile:
Forget what Nero tells you about “DMA” mode. Nero is simply not able to repport this correct when it comes to sata controllers, (for good reasons…sata is sata). But then, this issue has been posted hundreds of times. :stuck_out_tongue:
BTW, reading your signature… have you read the log about media used by TP?, heh. :smiley:

I have an Asus K8V-X MOBO, with a South Bridge controller. The Liteon Drive is connected to SATA 1 on the MOBO. I went into the BIOS, but could not find anywhere to change to IDE compatibility mode. Thanks again for any direction that you can provide!

Any ideas on where to go from here? Thanks

Remove the VIA RAID controller driver and instal the drivers from m$.


[I]chef[/I]
I uninstalled the VIA RAID controller and rebooted. Windows found and installed drivers for both the controller and the SATA DVD drive. I tried to burn another disk, but now Nero/DVDFab/Windows doesn’t recognize the media at all. It just keeps ejecting the disk and telling me to insert writable media.

Use imgburn and post the log info here, also the media info from the imgburn window.

More issues… This whole time, Nero has been hanging big time and is even worse now… I got to the burn screen, but I can’t touch it without it going into the “not responding” mode.

I installed ImgBurn and it hung while searching for SCSI/ATAPI devices and then I got this error:

I/O Error!

Device: [2:0:0] (G:) (RAID)

CDB: 12 00 00 00 60 00
Interpretation: Inquiry

Reason: A device attached to the system is not functioning.

What to do now…

It looks like Nero, (which was hanging,) was causing the issues with ImgBurn. I couldn’t even kill Nero w/ the Task Mgr, but when it started responding again, I tried opened ImgBurn again and it recognized the drive fine. I’ll try burning with it and post log info…

I burned w/ ImgBurn and it wouldn’t finalize either. Any idea what I/O error would cause this?

Media info:
Disc ID: CMC MAG-M01-001

Log:

I 13:21:45 ImgBurn Version 2.4.4.0 started!
I 13:21:45 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1)
I 13:21:45 Total Physical Memory: 2,095,192 KB - Available: 914,052 KB
I 13:21:45 Initialising SPTI…
I 13:21:45 Searching for SCSI / ATAPI devices…
I 13:23:03 Found 1 DVD-ROM, 1 DVD±RW and 1 DVD-RAM/+R!
I 13:32:14 Operation Started!
I 13:32:14 Building Image Tree…
I 13:32:29 Checking Directory Depth…
I 13:32:29 Calculating Totals…
I 13:32:29 Preparing Image…
I 13:32:30 Checking Path Length…
I 13:32:30 Contents: 64 Files, 2 Folders
I 13:32:30 Content Type: DVD Video
I 13:32:30 File System(s): ISO9660, UDF (1.02)
I 13:32:30 Volume Label: PINEAPPLE_EXPRESS
I 13:32:30 IFO/BUP 32K Padding: Enabled
I 13:32:30 Region Code: 1, 2, 3, 4, 5, 6, 7, 8
I 13:32:30 TV System: NTSC
I 13:32:30 Size: 4,509,663,232 bytes
I 13:32:30 Sectors: 2,201,984
I 13:32:30 Image Size: 4,510,515,200 bytes
I 13:32:30 Image Sectors: 2,202,400
I 13:32:41 Operation Successfully Completed! - Duration: 00:00:27
I 13:32:42 Operation Started!
I 13:32:42 Source File: -==//[BUILD IMAGE]/==-
I 13:32:42 Source File Sectors: 2,202,400 (MODE1/2048)
I 13:32:42 Source File Size: 4,510,515,200 bytes
I 13:32:42 Source File Volume Identifier: PINEAPPLE_EXPRESS
I 13:32:42 Source File Application Identifier: IMGBURN V2.4.4.0 - THE ULTIMATE IMAGE BURNER!
I 13:32:42 Source File Implementation Identifier: ImgBurn
I 13:32:42 Source File File System(s): ISO9660, UDF (1.02)
I 13:32:42 Destination Device: [2:0:0] ATAPI iHAS324 A BL1A (G:) (RAID)
I 13:32:42 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 6x, 8x, 12x, 16x)
I 13:32:42 Destination Media Sectors: 2,295,104
I 13:32:42 Write Mode: DVD
I 13:32:42 Write Type: DAO
I 13:32:42 Write Speed: MAX
I 13:32:42 DVD+R Reserve Track: No
I 13:32:42 Link Size: Auto
I 13:32:42 Lock Volume: Yes
I 13:32:42 Test Mode: No
I 13:32:42 OPC: No
I 13:32:42 BURN-Proof: Enabled
I 13:32:42 Book Type Setting: DVD-ROM
I 13:32:42 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes
I 13:32:42 Filling Buffer… (40 MB)
I 13:32:44 Writing LeadIn…
I 13:33:03 Writing Session 1 of 1… (1 Track, LBA: 0 - 2202399)
I 13:33:03 Writing Track 1 of 1… (MODE1/2048, LBA: 0 - 2202399)
I 13:39:07 Synchronising Cache…
I 13:39:11 Closing Track…
I 13:39:12 [B]Finalising Disc…
W 13:39:13 Potential ‘WaitImmediateIO’ Deferred Error - (0/3) - The request could not be performed because of an I/O device error.
W 13:39:26 Finalise Disc Failed! - Reason: The request could not be performed because of an I/O device error.
W 13:39:26 Retrying (1 of 3)…
W 13:39:26 Retry Failed - Reason: The request could not be performed because of an I/O device error.
W 13:39:26 Retrying (2 of 3)…
W 13:39:27 Retry Failed - Reason: The request could not be performed because of an I/O device error.
W 13:39:27 Retrying (3 of 3)…
W 13:39:27 Retry Failed - Reason: The request could not be performed because of an I/O device error.[/B]
I 13:39:32 Exporting Graph Data…
I 13:39:32 Graph Data File: C:\Users\Nathan\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS324_A_BL1A_SATURDAY-JUNE-06-2009_1-32_PM_CMC_MAG-M01-00_MAX.ibg
I 13:39:32 Export Successfully Completed!
I 13:39:32 Operation Successfully Completed! - Duration: 00:06:50
I 13:39:32 Average Write Rate: 12,134 KB/s (8.8x) - Maximum Write Rate: 18,754 KB/s (13.5x)
I 13:39:32 Cycling Tray before Verify…
I 13:39:56 Device Ready!
I 13:39:57 Operation Started!
I 13:39:57 Source Device: [2:0:0] ATAPI iHAS324 A BL1A (G:) (RAID)
I 13:39:57 Source Media Type: DVD+R (Book Type: DVD-ROM) (Disc ID: CMC MAG-M01-00) (Speeds: 6x, 8x, 12x, 16x)
I 13:39:57 Image File: -==//[BUILD IMAGE]/==-
I 13:39:57 Image File Sectors: 2,202,400 (MODE1/2048)
I 13:39:57 Image File Size: 4,510,515,200 bytes
I 13:39:57 Image File Volume Identifier: PINEAPPLE_EXPRESS
I 13:39:57 Image File Application Identifier: IMGBURN V2.4.4.0 - THE ULTIMATE IMAGE BURNER!
I 13:39:57 Image File Implementation Identifier: ImgBurn
I 13:39:57 Image File File System(s): ISO9660, UDF (1.02)
I 13:39:57 Read Speed (Data/Audio): MAX / MAX
I 13:39:57 Verifying Session 1 of 1… (1 Track, LBA: 0 - 2202399)
I 13:39:57 Verifying Track 1 of 1… (MODE1/2048, LBA: 0 - 2202399)

Remainder of Log (after Verifying) :

I 13:39:57 Verifying Track 1 of 1… (MODE1/2048, LBA: 0 - 2202399)
I 13:44:48 Exporting Graph Data…
I 13:44:49 Graph Data File: C:\Users\Nathan\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS324_A_BL1A_SATURDAY-JUNE-06-2009_1-32_PM_CMC_MAG-M01-00_MAX.ibg
I 13:44:49 Export Successfully Completed!
I 13:44:49 Operation Successfully Completed! - Duration: 00:04:51
I 13:44:49 Average Verify Rate: 15,136 KB/s (10.9x) - Maximum Verify Rate: 21,600 KB/s (15.6x)

I tried the disk in my DVD player and it seems to have actually finalized despite the error. None of the previous disks burned w/ Nero or DVDFab worked. Any advice on what to do next? Thanks again!

I 13:32:42 Destination Device: [2:0:0] ATAPI iHAS324 A BL1A (G B[/B]
I 13:32:42 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 6x, 8x, 12x, 16x)
I 13:32:42 Destination Media Sectors: 2,295,104
I 13:32:42 Write Mode: DVD
I 13:32:42 Write Type: DAO
[B]I 13:32:42 Write Speed: MAX[/B]

All thats hilighted is wrong, max speed & burner setup…

[I]chef[/I]
How do I change the RAID setting? I haven’t used an SATA burner before and am obviously not running in RAID. I just plugged this one in and left it at it’s default settings. Is that something that I need to change in the BIOS?
As far as the speed goes, I have burned at 8x as well, (although the drive should be able to burn at 16x,) but that still didn’t change anything. I still have the finalization issue. Would you recommend always having the Write Speed set at something specific? Thanks for the help and advice as I am learning.

Nathan

I think you have to change the sata controller setup in the BIOS to ide mode or compatibility mode…

MAX SPEED is defintely a wrong idea, try at 8x.

[I]chef[/I]

I have been through my BIOS thoroughly and haven’t found anywhere to change to IDE compatibility mode or anything similar… I have even read through the MOBO manual:

http://dlcdnet.asus.com/pub/ASUS/mb/sock754/k8v-x/e1879_k8v-x.pdf

I also have no idea why the drive is listed as being in RAID. During Boot up when I hit Tab to go into the VIA RAID BIOS utility, I am unable to change anything. It just tells me that drive is insufficient to use RAID.

Nero continues to take several minutes to open. I have ran a full Kaspersky Internet Security scan as well as full scans with Spybot, Ad Aware, MalwareBytes, & SpeedUpMyPC3. (I only run KIS and have the rest disabled during normal operating.)

I just tried to burn again w/ IMGBurn and got this error again:

Finalise Disc Failed!

Device: [2:0:0] ATAPI iHAS324 A bl1A (G: ) (RAID)

Reason: The request could not be performed because of an I/O device error.

At 8x the burn went exactly as in the log above with the exact same errors. The disk works fine in my player, but I’m still having finalization issues. I really don’t know what to do from here.

Thanks again.