Continuos Error: WriteSector failed at sector 725968 (16) - Code 03 0C 08

Burning Software
#1

Hello

I keep getting this mistake with an older version of CopyToDVD. any ideas?

2/26/2006 11:08:02 PM info ********** Report session closed ***********
2/26/2006 10:59:06 PM error Write failed
2/26/2006 10:59:06 PM info Average speed x0.22 Reference x1 = 1385.00 kbps
2/26/2006 10:59:06 PM info Total burning time 01:20:18.449
2/26/2006 10:59:02 PM info Finalizing CD…
2/26/2006 10:59:02 PM error WriteSector failed at sector 725968 (16) - Code 03 0C 08 [Write error, recovery fail]
2/26/2006 9:40:58 PM info Lead-in burning time (mS) 130147
2/26/2006 9:38:47 PM info Starting write buffer
2/26/2006 9:38:47 PM info Starting to write…
2/26/2006 9:38:47 PM info Buffer under-run proof enabled
2/26/2006 9:38:47 PM info DVD-R SAO writing mode selected
2/26/2006 9:38:47 PM info Writing speed requested x4.0, effective x4.0
2/26/2006 9:38:46 PM info Writing session #1 and closing disc.
2/26/2006 9:38:46 PM info Open Image file “C:\Documents and Settings\Hugo\Application Data\CopyToDvd\COPYTODVD_02262006_213846_056.cache”
2/26/2006 9:38:46 PM info Available sector size : 2297888
2/26/2006 9:38:46 PM info Media ID: SONY08D1
2/26/2006 9:38:46 PM info 120mm DVD Single Layer
2/26/2006 9:38:46 PM info Detected media $0011: DVD-R
2/26/2006 9:38:46 PM info 120mm DVD Single Layer
2/26/2006 9:38:46 PM info Detected media $0011: DVD-R
2/26/2006 9:38:45 PM info Finished browsing files - Data size 4.36 Gb.
2/26/2006 9:38:45 PM info Start Browsing file structures
2/26/2006 9:38:45 PM info IDE Controler manufacturer : Intel
2/26/2006 9:38:45 PM info IDE Controler Description : Intel® 82801BAM Ultra ATA Storage Controller - 244A
2/26/2006 9:38:45 PM info Supported Media: DVD-R, DVD-RW Seq., DVD-RW RO, DVD+R, DVD+RW, CD-R, CD-RW
2/26/2006 9:38:45 PM info Writing device used: 16:0:0 - SONY DVD RW DRU-510A 1.1a [E] (Usb)
2/26/2006 9:38:45 PM info Using Patin-Couffin driver Version 1.27, Internal revision 27 - Async. Access mode
2/26/2006 9:38:45 PM info Using DVD Video filelist creation mode.
2/26/2006 9:38:45 PM info ParamStr 4 = “/writespeed=4.0”
2/26/2006 9:38:45 PM info ParamStr 3 = “/writedevice=E”
2/26/2006 9:38:45 PM info ParamStr 2 = “/volumename=Last Tango In Paris”
2/26/2006 9:38:45 PM info ParamStr 1 = “/dvdvideofl=C:\PROGRA~1\VSO\COPYTO~1~c2c_fl.tmp”
2/26/2006 9:38:45 PM info ParamStr 0 = “C:\PROGRA~1\VSO\COPYTO~1\CopyToCd.exe”
2/26/2006 9:38:45 PM info User default language : 1033 (0x0409h) - English (United States)
2/26/2006 9:38:45 PM info System default language : 1033 (0x0409h) - English (United States)
2/26/2006 9:38:45 PM info Version 3.0.42.78
2/26/2006 9:38:45 PM info ExeName : “C:\PROGRA~1\VSO\COPYTO~1\CopyToCd.exe”
2/26/2006 9:38:45 PM info OS : Microsoft Windows XP Professional Service Pack 2 (Build 2600)

#2

Hi there,

You are right, this version is really old !

Latest version is v3.1.3 (Patin Couffin v1.35)

I strongly suggest upgrading to the latest, and provide us a full log again !

Good Luck !

#3

Hello
Thanks for your answer
I just updated it and I still have the problem:

2/27/2006 12:30:58 AM info ******************** Report session closed

2/27/2006 12:30:41 AM info Finalizing CD …
2/27/2006 12:30:41 AM error Write error at 7056 (16) - Code 05 21 02
[Illegal request, Invalid address for Write]
2/27/2006 12:29:21 AM info Lead-in burning time (mS) 30005
2/27/2006 12:28:56 AM warning AUTOUPDATE : The update site is not
reachable.
(0 - HTTP/1.1 302 Found)
2/27/2006 12:28:51 AM info Start Write Buffer
2/27/2006 12:28:51 AM info Start writing…
2/27/2006 12:28:51 AM info Buffer under-run proof enabled
2/27/2006 12:28:51 AM info Init success: DVD-R SAO
2/27/2006 12:28:51 AM info Writing speed requested x4.0, effective x4.0
2/27/2006 12:28:50 AM info Writing session #1 and closing disc.
2/27/2006 12:28:50 AM info Open Image file “C:\Documents and
Settings\Hugo\Application
Data\CopyToDvd\COPYTODVD_02272006_002850_089.cache”
2/27/2006 12:28:50 AM info Required sector size : 2286160
2/27/2006 12:28:50 AM info Available sector size : 2297888
2/27/2006 12:28:50 AM info Available write speed: x4.0, x2.0, x1.0
2/27/2006 12:28:50 AM info Media ID: SONY08D1
2/27/2006 12:28:50 AM info 120mm DVD
2/27/2006 12:28:50 AM info Detected media $0011 : DVD-R
2/27/2006 12:28:50 AM info Finished browsing files - Data size 4.36 Gb.
2/27/2006 12:28:50 AM info File scan complete: 19 files, 2 directories
2/27/2006 12:28:49 AM info Start Browsing file structures
2/27/2006 12:28:49 AM info IDE Controler manufacturer : Intel
2/27/2006 12:28:49 AM info IDE Controler Description : Intel®
82801BAM
Ultra ATA Storage Controller - 244A
2/27/2006 12:28:49 AM info Location : PCI bus 0, device 31, function 1
2/27/2006 12:28:49 AM info Support Media : DVD-R, DVD-RW Seq., DVD-RW
RO,
DVD+R, DVD+RW, CD-R, CD-RW
2/27/2006 12:28:49 AM info Writing device used : 16:0:0 - SONY DVD RW
DRU-510A 1.1a [E] (Usb)
2/27/2006 12:28:49 AM info Using Patin-Couffin driver Version 1.35,
Internal
revision 35 - Async. Access mode
2/27/2006 12:28:49 AM info Using DVD Video filelist creation mode.
2/27/2006 12:28:49 AM info ParamStr 3 = “/writedevice=E”
2/27/2006 12:28:49 AM info ParamStr 2 = “/volumename=Last Tango In
Paris”
2/27/2006 12:28:49 AM info ParamStr 1 = “/dvdvideofl=C:\Documents and
Settings\Hugo\Application Data\Vso~c2c_fl.tmp”
2/27/2006 12:28:49 AM info ParamStr 0 =
“C:\PROGRA~1\VSO\COPYTO~1\CopyToCd.exe”
2/27/2006 12:28:49 AM info User default language : 1033 (0x0409h) -
English
(United States)
2/27/2006 12:28:49 AM info System default language : 1033 (0x0409h) -
English (United States)
2/27/2006 12:28:49 AM info Version 3.1.3.137
2/27/2006 12:28:49 AM info ExeName :
“C:\PROGRA~1\VSO\COPYTO~1\CopyToCd.exe”
2/27/2006 12:28:49 AM info OS : Microsoft Windows XP Professional
Service
Pack 2 (Build 2600)
2/27/2006 12:28:49 AM info 32 bits native system
2/27/2006 12:28:43 AM info ******************** Report session started

#4

Hi again,

2/27/2006 12:28:51 AM info Init success: DVD-R SAO

Because you are using the latest version, and you have the latest firmware on your burner, maybe your drives doesn’t like to burn in Session At Once mode.

In the settings, in the “Writting Devices” there is an option on the the bottom

[X] DVD-R SAO first

Disable this option, and try again.

I have heard of a few people having issues burning with SAO.

I also noticed you changed media from Ritek to Sony, and it’s still doing it, this is why I’m suggesting this.

I always burn at x2.0 (Slowest Speed) when having burning issues.

So either you can try an other one at x2.0 (SAO) or disable SAO, and try x2.0

If it’s a go, keep SAO disabled and try an other one at x4.0

Good Luck !

UPDATE:

2/27/2006 12:28:50 AM info Required sector size : 2286160
2/27/2006 12:28:50 AM info Available sector size : 2297888

Don’t burn too close to the edge of the media.
This is also problematic sometimes.

Maybe it’s not the SAO at all but this.

Something else to try !