Command sequence error: please help

Hi there,

I am on Windows XP Home, and I have a LG DVDRAM Super Multi GSA 4120B writer. It has been working fine until this morning. I kept on getting Command Sequence Error messages and Nero resetting itself. When I simulated the burn, I receive the same resetting message. Please help me if you could. I upgraded the writer’s firmware but I am still getting the same error. I am using Nero 6.6.0.6. The following is a log of one of my unsuccessful burns:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 16:21:30
Nero Version: 6.6.0.6
Recorder: <HL-DT-ST DVDRAM GSA-4120B>Version: A115 - HA 2 TA 0 - 6.6.0.6
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TEAC CD-224E >Version: 9.9A - HA 1 TA 0 - 6.6.0.6
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHS2020AT E atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TEAC CD-224E atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
TEAC CD-224E D: CDRom0
HL-DT-ST DVDRAM GSA-4120 H: CDRom3

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 36700160 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 222MB (228336kB)
Free physical memory: 53MB (54564kB)
Memory in use : 76 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.11.2005
CD-ROM (ISO)
14:23:17 #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

14:23:17 #2 Text 0 File Reader.cpp, Line 127
Reader running

14:23:17 #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4120B running

14:23:17 #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

14:23:18 #5 Text 0 File Burncd.cpp, Line 3155
Turn on Disc-at-once, using CD-R/RW media

14:23:18 #6 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 6185 ( 1:24.35)

14:23:18 #7 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO (enabled: CD)

14:23:18 #8 Text 0 File DlgWaitCD.cpp, Line 2311
Recorder: HL-DT-ST DVDRAM GSA-4120B;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

14:23:18 #9 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================

14:23:18 #10 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 6186 (6186) = #6186/1:22.36
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 6186 blocks [HL-DT-ST DVDRAM GSA-4120B]
--------------------------------------------------------------

14:23:18 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [HL-DT-ST DVDRAM GSA-4120B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 12976128, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
6186 | lead-out | 1 | 0x41 | 0x00

14:23:18 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

14:23:18 #13 Text 0 File Burncd.cpp, Line 4042
Cache writing successful.

14:23:18 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

14:23:18 #15 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 40x (6,000 KB/s)

14:23:18 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

14:23:18 #17 Text 0 File Mmc.cpp, Line 16327
StartDAO : CD-Text - Off

14:23:18 #18 Text 0 File Mmc.cpp, Line 21079
Set BUFE: Buffer underrun protection -> OFF

14:23:18 #19 Text 0 File Mmc.cpp, Line 16614
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 01 18 24

14:23:23 #20 SCSI -500 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03E80000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0xFF 0xFF 0xFF 0x6A 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

14:23:23 #21 Text 0 File Cdrdrv.cpp, Line 1284
14:23:23.811 - HL-DT-ST DVDRAM GSA-4120B\H2 T0 : Queue again later

14:23:24 #22 SCSI -500 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04610200
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0xFF 0xFF 0xFF 0x6A 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

14:23:24 #23 Text 0 File Mmc.cpp, Line 18713
Writer-Buffer for HL-DT-ST DVDRAM GSA-4120B\H2 T0 reduced to 32768Bytes

14:23:24 #24 SCSI -1114 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04610200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0xFF 0xFF 0xFF 0x6A 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x10
0x00 0x00 0x00 0x80 0x29 0x00

14:23:24 #25 CDR -1114 File Writer.cpp, Line 311
Reset occurred

14:23:24 #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

14:23:24 #27 Phase 34 File dlgbrnst.cpp, Line 1832
Simulation failed at 40x (6,000 KB/s)

Existing drivers:
File ‘Drivers\ADPU160M.SYS’: Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 22:07:32
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.28a, size=20640 bytes, created 11/03/2005 22:28:09 (Prassi/Veritas driver for win 2K)
File ‘Drivers\atapi.sys’: Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 08:27:50 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)