CMC Magnetics BD-R DL

Right, but I´m spoilt. :bigsmile:

Pioneer BDR-S09, FW1.31, burned at 6x
Mediarange BD-R50 6x, labeled, same batch as before, different original Spindle of 10
MID CMCMAG DI6

No. 1 looks quite good.
No. 2 was the last disc of the spindle, seems to have interacted with the plastic surface of the protection disc below, LDC and BIS on the first layer go ballistic, :Z the second layer still looks good.:confused:
This kind of chemical reaction of the discs data surface with other plastic surfaces such as in sleeves was monitored before.
That´s why I´m storing my burned discs in jewelcases and don´t buy repacked discs any more. :iagree:



2x Mediarange BD-R50 6x at 6x in Pioneer BD-R S09

  1. MR professional printable, spindle of 25
  2. MR printable, spindle of 10, old package design



1 Like

Mediarange BD-R50 6x printable, new package design
at 6x
in a LiteOn iHBS 312 2
:doh:
Violation of the first rule for CMCMAG DI6: Don´t burn them in a LiteOn (or LG):disagree:


Burner: BDR-S09XLT
Firmware: 1.34
Media: ValueDisc 6x BD-R DL white inkjet hub printable (MIT)
MID: CMCMAG DI6
Stamper Code L0: CMDBR6L0 PA4 L1215-02 02D2 241B
Stamper Code L0: CMDBR6L1 PA4 L1206-08 3A52 241B
Hub Serial: DBRF602SH11162986 AB323 R3
Burn Speed: 6x
Burning Software: ImgBurn 2.5.8.0

Burner: [B]BDR-XS06JL[/B] fw 1.01
Scanner: Samsung SE-506CB fw TS02
Media: [B]MediaRange 6x BD-R DL white inkjet hub printable[/B]
MID: CMCMAG DI6
Stamper Code: CMDBR6L1 PA4 L1206-09 4B54 222B
Hub Serial: DBRF602TH250123345 AA61A L2
Burn Speed: 2x
Burning Software: Nero Burning ROM v.16
Result: [B]Disc unreadable, will not even pass surface scan verify[/B] in Nero Burning ROM
NB!: Have same issues with ALL of my MediaRange BD-R DL white inkjet printable discs, regardless of which burner I use and which burn speed I use. They all fail.

[B]Note: Same disc specimen as above (i.e. same burn) - just different scanner / software for scanning.
[/B]
Burner: BDR-XS06JL fw 1.01
Scanner: LG WH16NS48DQ fw 1.03 @8x
Media: MediaRange 6x BD-R DL white inkjet hub printable
MID: CMCMAG DI6
Stamper Code: CMDBR6L1 PA4 L1206-09 4B54 222B
Hub Serial: DBRF602TH250123345 AA61A L2
Burn Speed: 2x
Burning Software: Nero Burning ROM v.16
Result: Disc unreadable, will not even pass surface scan verify in Nero Burning ROM
NB!: Have same issues with ALL of my MediaRange BD-R DL white inkjet printable discs, regardless of which burner I use and which burn speed I use. They all fail.

[B]MediaRange BD-R DL 50GB 6X printable on Pioneer BDR-S09XL @ 2x[/B]
[B]Burner[/B]: Pioneer BDR-S09 fw 1.33
[B]Scanner[/B]: LiteOn iHES-208
[B]Media[/B]: MediaRange 6x BD-R DL white inkjet hub printable
[B]MID[/B]: CMCMAG DI6
[B]Stamper [/B]Code: CMDBR6L1 PA4 L1206-09 4B54 222B
[B]Hub [/B]Serial: DBRF602TH250123345 AA61A L2
Bu[B][/B]rn Speed: 2x
Burning Software: Nero Burning ROM v.16
[B]Result[/B]: Disc readable, passes verify, but sub-optimal for archival
[B]NB![/B]: Have improved the burn quality of CMC MAG-DI6000 MediaRange by downgrading my Pioneer S09 firmware from 1.34 to 1.33.

[B]MediaRange BD-R DL 50GB 6X printable on Pioneer BDR-S09XL @ 2x[/B]
[B]Burner[/B]: Pioneer BDR-S09 fw 1.33
[B]Scanner[/B]: LG WH16NS48DQ
[B]Media[/B]: MediaRange 6x BD-R DL white inkjet hub printable
[B]MID[/B]: CMCMAG DI6
[B]Stamper [/B]Code: CMDBR6L1 PA4 L1206-09 4B54 222B
[B]Hub [/B]Serial: DBRF602TH250123345 AA61A L2
Bu[B][/B]rn Speed: 2x
Burning Software: Nero Burning ROM v.16
[B]Result[/B]: Disc readable, passes verify, but sub-optimal for archival
[B]NB![/B]: Exact same disc specimen (burn instance) as above LiteOn iHES-208 scan, this time just scanned on LG WH16NS48DQ. I have been able to improve the burn quality of CMC MAG-DI6000 MediaRange by downgrading my Pioneer S09 firmware from 1.34 to 1.33. Now it is passable.

Burner: WH16NS48
Firmware: 1.D3
Media: TDK hard coat 6x BD-R DL white inkjet hub printable (MIT)
MID: CMCMAG DI6
Stamper Code L0: CMDBR6L0 PA4 L1215-02 02D2 241B
Stamper Code L0: CMDBR6L1 PA4 L1206-08 3A52 241B
Hub Serial: DBRF602SG04005162 AB22B1 3
Burn Speed: 6x
Burning Software: Opti Drive Control 1.70

Disc manufactured July 4, 2014.

Mediarange printable 50GB 6x / CMCMAGDI6
Manufactured 06/2012

Burned with Pioneer BDR-209EBK @4x


Mediarange printable 50GB 6x / CMCMAGDI6
Manufactured 06/2012

Burned with LiteOn iHBS112 @4x


I thought DI6 is similar to Verbatimf, but looks not so good

Burner: BDR-S08XLT
Firmware: 1.50
Media: MnDA Disc 6x BD-R DL white inkjet hub printable (MIC)
MID: CMCMAG DI6
Stamper Code L0: CMD0BR6-PA4
Stamper Code L0: CMDBR6L1 PA4 L1114-04 02C1 032A
Hub Serial: DBRF606QL02032945 AA53B R2
Burn Speed: 6x
Burning Software: ImgBurn 2.5.8.0

Disc manufactured December 2nd, 2012.

Xlayer 50GB 6x / CMCMAGDI6
Manufactured 11/2012

Burned with Pioneer BDR-209EBK @6x


Burner: BDR-S11J-BK
Firmware: 1.52
Media: MnDA Disc 6x BD-R DL white inkjet hub printable (MIC)
MID: CMCMAG DI6
Stamper Code L0: CMD0BR6-PA4
Stamper Code L0: CMDBR6L1 PA4 L1114-04 02C1 032A
Hub Serial: DBRF606QL02040197 AA53A R2
Burn Speed: 8x
Burning Software: Opti Drive Control 1.70

Disc manufactured December 2nd, 2012.

Burner: BDR-S11J-BK
Firmware: 1.52
Media: MnDA Disc 6x BD-R DL white inkjet hub printable (MIC)
MID: CMCMAG DI6
Stamper Code L0: CMD0BR6-PA4
Stamper Code L0: CMDBR6L1 PA4 L1114-04 02C1 032A
Hub Serial: DBRF606QL02075729 AAA3A R2
Burn Speed: 8x
Burning Software: Opti Drive Control 1.70

Disc manufactured December 2nd, 2012. Not much difference from the last scan, at least the quality is consistent.

Seems those discs don’t like 8x, how do they look written @ 6x?

Burner: BDR-S11J-BK
Firmware: 1.52
Media: MnDA Disc 6x BD-R DL white inkjet hub printable (MIC)
MID: CMCMAG DI6
Stamper Code L0: CMD0BR6-PA4
Stamper Code L0: CMDBR6L1 PA4 L1114-04 02C1 032A
Hub Serial: DBRF606QL02040194 AA13A L1
Burn Speed: 6x
Burning Software: Opti Drive Control 1.70

Disc manufactured December 2nd, 2012. For @Oinker :laughing:

Not much better than 8x, especially the weird increase of errors from ca. 20 GB 'til the layer change.