Drive: Liteon 1633s BS0H
time completed: 6min
how TDK1616DLN 2.C8 read the disc
very jaggy graph. not good.
tHIS Is how Liteon 1633s itself read back the disc
better n smoother graph!
kprobe scan. better than my expectation after seeing what the review said in some sites.
LG4160B A302 only can burn at 4x max.
TDK1616DLN 2.C8 can burn at 12x max.
MSI DR16-B M1.4 can burn at 16x max ( Benq 1620 OEM)
CMC is going down hill again…thier F01 disks were good quality but since then… :Z
Hmm the above picture of the BENQ suggest different things.
But then again it’s just a K-probe scan and a transfer rate test.
Probally Lite On does not support it up to standards like they do with most media if a drive is just released.
Let me say this don’t judge media quality on K-probe alone and specially not if you used a drive which is known for no good media support.
NEC 3500A has this media locked to 12X on most firmwares. (if supported at all)
Media dump using 1633S:
Unique Disc Identifier : [DVD+R:CMC MAG-M01-000]
Disc Type : [DVD+R]
Manufacturer ID : [CMC MAG]
Manufacturer Name : [CMC Magnetics Corp.]
Media Type ID : [M01]
Product Revision : [Not Specified]
Disc Application Code : [General Purpose]
Recording Speeds : [1x , 2.4x , 4x , 6x-8x , 6x-??x]
Blank Disc Capacity : [2,295,104 Sectors = 4,482.6MB = 4.38GB (4.70GB)]
** INFO : An Empty Writable Disc Is Recommended For Accurate Results
** INFO : Drive = LITE-ON DVDRW SOHW-1633S [FW BS0C]
** INFO : Write Capabilities = DVD+R DVD+R-DL DVD+RW DVD-R DVD-RW
** INFO : Disc = [DVD+R:CMC MAG-M01-000]
** INFO : Write Speeds (Supported By This Drive On This Disc) Listed Below
** INFO : GET PERFORMANCE Write Speed Descriptor(s)
Descriptor #1 = 22160 KBPS (16.00x) - [CLV/Non-Pure CAV]
Descriptor #2 = 16620 KBPS (12.00x) - [CLV/Non-Pure CAV]
Descriptor #3 = 11080 KBPS ( 8.00x) - [CLV/Non-Pure CAV]
Descriptor #4 = 8310 KBPS ( 6.00x) - [CLV/Non-Pure CAV]
Descriptor #5 = 5540 KBPS ( 4.00x) - [CLV/Non-Pure CAV]