CloneDVD .... Error: WriteDVD 11 5

vbimport

#1

Do you know what this error means and what do I have to do for succesfully back up my dvd collection!?!?!
Please :sad:


#2

Originally posted by flaviano
Do you know what this error means and what do I have to do for succesfully back up my dvd collection!?!?!
Please :sad:

Please tell us more about the burner/media you are using.

Probably the media has not enough free blocks available.

If you used the third usecase (Write Existing Data), use one of the other two.

If you already transcoded your files to a DVD-5, you may be lucky by downloading the latest CloneDVD2 Sneak Preview at http://www.elby.ch. Try to reduce the output size a little: click on the “DVD-5” located to the left side of the quality-bar, set it to Custom and then to 4600MB instead of 4700MB.

Good luck and keep us posted.


#3

thanks anyway i think it was only a problrm due of "shity:Z " blanck dvd (novatech value), i bought some tdk dvd-r and i don’t have anymore that error msg!
Thanks anyway:D


#4

Originally posted by armin

Please tell us more about the burner/media you are using.

Probably the media has not enough free blocks available.

Try to reduce the output size a little: click on the “DVD-5” located to the left side of the quality-bar, set it to Custom and then to 4600MB instead of 4700MB.

Hi armin,

I have received the same error :

Here’s the media info :

Media Information
Region information N/A not a DVD-VIDEO
Media code/Manufacturer ID RITEK R02
Format Capacity Not Formatted
Free Blocks 405405696
Free Capacity 4.38GB(4.70GB)
Book Type DVD+R
Media Type DVD+R
Media Id Code Speed 4.0x 5540KBps
Available Write Descriptor CLV 4.0x 5540KBps
Available Write Descriptor CLV 2.4x 3324KBps
Available Write Descriptor CLV 2.0x 2770KBps
Data area starting sector 30000h
Linear Density 0.267um/bit
Track Density 0.74um/track
Number of Layers 1

So, what can you say about the free blocks here ?
It seems a bit less than normal ( e.g. the Verbatim DVD-R number of blocks is 412352512 ).
I’ve reduced the output size to 4600 and am going to try copying the disc again. To be reported 2morrow. :wink:


#5

Hi armin,

Even though I seemed to do everything right ( just as you said above ),
the ‘Custom setting’ trick didn’t help this time either & there occured still the same error once again.


Hmm. There were no problems w this partucular media in the past.
I’ll keep you updated on this… :slight_smile:


#6

Yesterday I removed the “Output Size too Large” message and increased the output size to 5000MB to reproduce this problem. Using a +R I immediately got a WriteDVD 10 5, but not an 11 5 :confused:

So I have another idea, instead of ‘maximum’, please set the writing speed to the actual speed the media is labeled for.


#7

Originally posted by armin

So I have another idea, instead of ‘maximum’,
please set the writing speed to the actual speed the media is labeled for.
It’s 4x and the ‘Max’ setting used to work fine, but not this time.
OK, I’m gonna try it with : a) 4x and b) perhaps a different media.
Will let you know some later…

Cheers :slight_smile:


#8

Originally posted by armin

please set the writing speed to the actual speed the media is labeled for.
Yes, this did the trick and the 4x writing was a success :


Disc Regions are 1,2,3,4,5,6,7,8
Media code/Manufacturer ID RITEK R02
Format Type UDF 1.02
Volume Name :wink: :wink: :wink: :wink: :wink:
Application id ELBY CLONEDVD
Implementation id ELABORATE BYTES
Recording Date/Time (mm/dd/yyyy) 3/16/2004 10:01:00
Format Capacity 4.22GB(4.53GB)
Book Type DVD+R
Media Type DVD+R
Media Id Code Speed 4.0x 5540KBps
Available Write Descriptor CLV 4.0x 5540KBps
Available Write Descriptor CLV 2.4x 3324KBps
Available Write Descriptor CLV 2.0x 2770KBps
Data area starting sector 30000h
Data area end sector 21C33Fh
Linear Density 0.267um/bit
Track Density 0.74um/track
Number of Layers 1