CloneBD Update Announcements Only

vbimport

#21

[B]CloneBD 1.0.4.0 [/B]

	 				 					 					 				 				 					 				 		 			 				 					http://static.slysoft.com/SetupCloneBD.exe

1.0.4.0 2015-04-11

[ul]
[li]change: disc hash includes additional files to better detect differences caused by decryptor tools[/li][li]change: extended burner logging[/li][li]fix: remove path delimiters from disc descriptions when deriving mkv/mp4 filenames. [#3460][/li][/ul]


#22

CloneBD 1.0.4.1
http://static.slysoft.com/SetupCloneBD.exe

1.0.4.1 2015-04-12
fix: sometimes convert uncompressed even through compression was selected. [#3487, #3163, #3465, #3467]
fix: installer will no longer try to install files after a reboot, but throw an error message instead, if a file can’t be written (reported by Ch3vr0n)
updated languages


#23

CloneBD 1.0.4.2
http://static.slysoft.com/SetupCloneBD.exe

1.0.4.2 2015-04-15
improved: rate plotter
improved: remaining time prediction
improved: added overhead data to estimation when doing complete copies (in some cases JAR folders are enormous)
change: make slider automatically adjust to disc size on target page, if destination drive is not the same as source drive.
change: timeout estimator bar in case a packet could not be retrieved (otherwise Go-button would remain disabled)
fix: when burning multiple discs in a row, read/write error counts were not reset.
fix: uncompressed copies had a tendency to overshoot estimated output size. Now estimating video bitrate less conservatively.
fix: trim paths entered by user, to remove trailing spaces.
fix: “Go” button sometimes did not refresh correctly, when state changes from disabled to enabled (would appear disabled, until hovered with mouse)
fix: burner logging crashed and required overly huge memory blocks
minor fixes and improvements
updated languages


#24

CloneBD 1.0.4.3
http://static.slysoft.com/SetupCloneBD.exe

1.0.4.3 2015-04-18
improved: burn engine. Some (not all) write errors we’re false positives
improved: adjust reported unformatted blank disc sizes to expected actual capacity
change: preselect the respective disc size in the size selection dropdown on target page according to inserted disc. As a side effect, discs/drives reporting too large capacity have no negative impact on size output.
fix: Bert’s error information on completion page sometimes vanished after a few seconds
fix: automatic disc requester did not show on burn retries (automatically wait for new disc)
minor fixes and improvements
updated languages, added Welsh


#25

[B]CloneBD 1.0.4.4 [/B]
http://static.slysoft.com/SetupCloneBD.exe

1.0.4.4 2015-04-24

[ul]
[li]new: added warning message, when resulting size exceeds the size of a BD-R50[/li][li]improved: estimate proportional size of Dolby TrueHD tracks for higher precision.[/li][li]improved: ensure, that burn engine does not write over the capacity limit in case data has oversize[/li][li]fix: in case of excessive amounts of read errors/data corrupt errors, a memory overflow could happen.[/li][li]fix: prevent crash, when querying incomplete or invalid playlists with zero playlist elements.[/li][li]fix: crashes on Windows XP[/li][li]minor fixes and improvements[/li][li]updated languages[/li][/ul]


#26

[B]CloneBD 1.0.4.5 [/B]

                                                                                                                                                                                                    http://static.slysoft.com/SetupCloneBD.exe

1.0.4.5 2015-04-26

[ul]
[li]fix: CloneBD crashed in HDMV menu generation when making a partial copy[/li][li]updated languages[/li][/ul]


#27

1.0.4.6 2015-04-26


#28

[B]CloneBD 1.0.4.7 [/B]

	 				 					 					 				 				 		 			 				 					http://static.slysoft.com/SetupCloneBD.exe

1.0.4.7 2015-04-29

[ul]
[li]improved: error descriptions more verbose[/li][li]change: focus on completion page. Should fix the issue causing the Alt-key sometimes not to reveal the log buttons.[/li][li]fix: disc title would not show on certain sources, when opened from HDD[/li][li]fix: Dolby Atmos (TrueHD) estimation causing oversize.[/li][li]fix: resuming after pausing sometimes wouldn’t resume the clock (remaining/elapsed time)[/li][li]fix: preview while transcoding without compression was broken.[/li][li]fix: preselecting 50GB BD-R could result in slight compression, even if not required.[/li][li]minor fixes and improvements[/li][li]updated languages[/li][/ul]


#29

[B]CloneBD 1.0.4.8 [/B]

	 				 					 					 				 				 		 			 				 					http://static.slysoft.com/SetupCloneBD.exe

1.0.4.8 2015-05-20

[ul]
[li]new: option to maintain original menu with partial copies (use with caution! Discs may behave erroneously depending on what was deselected)[/li][li]change: installer updated to work with Windows 10[/li][li]change: propagate errors correctly, when HDMV menu generation fails[/li][li]change: set default button in CloneBD disc menu, when copied disc has only one playlist[/li][li]change: improved support for AC-3 output[/li][li]change: improved meta information in .mkv files[/li][li]change: added DTS-HD information according to Matroska spec[/li][li]change: language tags changed to ISO639-2[/li][li]fix: processing on systems with incompatible graphics card cause crash[/li][li]fix: uncomplete or invalid disc structures could cause crashes. Added sanity check prior to processing such disc.[/li][li]fix: implemented minimum possible bitrates for resulting video to avoid overshoot.[/li][li]fix: handle of timeline slider for preview player sometimes wasn’t accessible.[/li][li]fix: some asserts in x264[/li][li]fix: audio distortion when encoding AAC[/li][li]fix: audio silence in some DTS streams[/li][li]fix: subtitles trimmed to video size[/li][li]fix: subtitles were displayed at a wrong time[/li][li]fix: preliminary supported for “forced” subtitles in .mp4/.mkv[/li][li]fix: VC-1 interlaced fields were displayed in wrong order[/li][li]fix: VC-1 trimmed bottom replaced by black box[/li][li]fix: AVC trimmed bottom replaced by black box[/li][li]minor fixes and improvements[/li][li]updated languages[/li][/ul]


#30

CloneBD 1.0.4.9
http://static.slysoft.com/SetupCloneBD.exe

1.0.4.9 2015-06-14
new: bt709, smpte170m color space definitions are now used/kept during transcoding
new: AVC High@High for Xbox One, PS4
new: better ATOM layout in .mp4 (allows 3rd party tools to better change “ID3”-tags)
new: modifyable YUV color table for subtitles in .mkv
change: AC3 encoder using float (not int)
change: memory usage reduced by 150 MB when using AVC encoder
changed: AVC now encoded as “zero-latency” on chapter marks
change: assert handling in libx264 which deadlocks drone processes
change: AAC encoder uses better encoding settings
change: color space of video (when set) is also set in AVC
change: AC-3 encoder now sets core attributes correctly
fix: more assertions in libx264
fix: bitstream encoder used signed-shifting
fix: high-frequency (VQ) decoding was broken in DTS, creating "noise"
fix: various fixes for playback on PS4 (according to Sony Recommendation Gibberish)
fix: playback issues with encoded AVC on Xbox One
fix: playback issues with lossless AVC on Xbox One
fix: .mp4 not seekable on PS4
fix: .mp4 not showing chapters, title on PS4
fix: .mp4 playback issues on PS4
fix: .mp4 playback issues on Xbox One (reduced macroblock complexity)
fix: avoid negative DTS/PTS delta when using 2-B frames
fix: VC-1 interlaced decoding
fix: AVC interlaced decoding (PAFF/MBAFF)
fix: “jump to main title directly” option was broken after “keep original menu” option was added.
workaround: omit clips with non-matching stream types when creating device/file output.
minor fixes and improvements
updated languages


#31

1.0.5.0 2015-07-24

  • new: display main video bitrate on target page (note: this bitrate currently applies to the largest clip to be converted only)
  • new: more bitrates available when converting to files/devices (allows for smaller files)
  • new: options to convert HD audio or all audio to AC3 (sorry, no DTS yet), allowing to force stereo and select bitrates. This will help reduce overall file sizes a lot in many cases, where audio quality is of no great concern.
  • change: improved transcoding speed when only compressing/converting audio
  • fix: miscalculation of partial clips in estimator caused oversize results
  • fix: crash in x264 encoder
  • fix: deadlock in x264 encoder
  • fix: all assert message boxes that freeze x264 encoder
  • fix: minimum possible bitrate calculation didn’t account for small resolutions in file/device mode
  • fix: layout problems on target page, rearranged options in preparation for more audio options to come.
  • minor fixes and improvements
  • updated languages
    http://www.slysoft.com/en/download.html

#32

1.0.5.1 2015-08-01

  • fix: bug introduced in v1.0.5.0 caused uncompressed copies to (possibly) fail on some standalone players.
  • fix: crash when creating MKB with lossless or core audio
  • fix: possible crash when copying clips w/o video
  • fix: top-menu button was disabled when playing back a disc with CloneBD menu.
  • fix: DTS-HD lossless audio in .mkv
  • minor fixes and improvements
  • updated languages
    http://www.slysoft.com/en/download.html

#33

CloneBD 1.0.5.2

http://www.slysoft.com/en/download.html

1.0.5.2 2015-08-17
new: support for angles implemented, allows for selection of specific angles or keeping all angles (BD-BD copies only, of course).
fix: temporary workaround: subtitles etched on mkv video output until selectable subs are properly fixed (coming up soon)
added enhanced debug and crash log gathering to determine the cause of video encoder crashes
minor fixes and improvements
updated languages


#34

CloneBD 1.0.5.3
http://static.slysoft.com/SetupCloneBD.exe

1.0.5.3 2015-08-19
fix: stream creation when EAC3 or Dolby True HD streams are used in legacy AC3 format


#35

http://static.slysoft.com/SetupCloneBD.exe

1.0.5.5 2015-10-01
fix: Windows Vista + Windows 7 conflict with PCA (Program Compatibility Assistant)

1.0.5.4 2015-10-01
new: significantly improved processing speed
new: selectable subtitles in MKV
new: added performance information to processing page
new: added selective data requester that can send requested data packets by e-mail if required for bug fixing or improvements. (Users will be prompted and can deny such requests)
new: when running multiple instances of CloneBD, ensure that the second instance does not access the same disc (avoid excessive seeking)
change: improved estimator allowing for some degree of subtitle bit rate evaluation
change: data rate plotter curve smoothed to be more readable
fix: when selecting down conversion for all audio to AC3 on BD copies, stereo tracks were still copied 1:1
fix: fixed certain types of DTS-HD audio
minor fixes and improvements
updated languages


#36

http://static.slysoft.com/SetupCloneBD.exe

1.0.5.6 2015-10-05
change: removed SSE4 instructions for compatibility with older CPUs
fix: sporadic deadlock in player
fix: layout on progress page for small window sizes
fix: CPU usage now correctly displayed under Vista
fix: performance data on processing page show correct information when video is not being transcoded
minor fixes and improvements
updated languages


#37

http://sandbox.slysoft.com/beta/SetupCloneBD1057Beta.exe

1.0.5.7 2015-10-06 (beta)
change: combined preview and data rate plotter on progress page, eliminated tab.
fix: chapters in .mkv should work now
fix: installer is now able to continue, even if files are currently in use
fix: other programs using the ElbyCDIO driver stop working, after CloneBD is uninstalled
minor fixes and improvements
updated languages


#38

http://static.slysoft.com/SetupCloneBD.exe

1.0.5.8 2015-10-08
new: added check box to allow disabling of video preview during transcoding
change: select audio codec on target page instead of selecting via device profile
fix: crash due to small buffer allocation, when no video pitch is given.
fix: Re-starting other programs using ElbyCDIO, after CloneBD is uninstalled
minor fixes and improvements
updated languages


#39

http://sandbox.slysoft.com/beta/SetupCloneBD1059Beta.exe

1.0.5.9 2015-10-10 (beta)
new: added video encoding support for H.265/HEVC, requires a HEVC capable hardware or software player (such as VLC). For Win x64 only. Experimental!
new: added statistics to the completion page
new: added support for PGS (Blu-ray) subtitle in external containers
new: added support for burned subtitles
change: allow selection of subtitle type (BD/DVD) for MKV creation
change: allow video codec selection on output page (currently only MKV)
fix: subtitle + video-lossless hang
minor fixes and improvements
updated languages

ERROR in download FILE do not use


#40

http://sandbox.slysoft.com/beta/SetupCloneBD1060Beta.exe

1.0.6.0 2015-10-11 (beta)
fix: libstdc+±6.dll was missing in setup of ver 1.0.5.9
updated languages (nl, sv)

1.0.5.9 2015-10-10 (beta)
new: added video encoding support for H.265/HEVC, requires a HEVC capable hardware or software player (such as VLC). For Win x64 only. Experimental!
new: added statistics to the completion page
new: added support for PGS (Blu-ray) subtitle in external containers
new: added support for burned subtitles
change: allow selection of subtitle type (BD/DVD) for MKV creation
change: allow video codec selection on output page (currently only MKV)
fix: subtitle + video-lossless hang
minor fixes and improvements
updated languages