Cd writting problem

iam having the writting problem with problem with TSSTCorp CD/DVDW TS-L632D.while writting burning getting failed sometimes at 90%/30% or even @ 10 %.so that disc become un usable.i have re installed O.S ,driver,and tried with several version of nero.but result is same.iam attaching my error report copy…

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.7.5.1
Internal Version: 7, 7, 5, 1
(Nero Express)
Recorder: <TSSTcorp CD/DVDW TS-L632D>Version: ac00 - HA 1 TA 0 - 7.7.5.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TSSTcorp CD/DVDW TS-L632D>Version: ac00 - HA 1 TA 0 - 7.7.5.1
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200UE-22KVT0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-L632D atapi Port 0 ID 1 DMA: Off

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-L632D E: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
BUFE : 0
Physical memory : 502MB (514156kB)
Free physical memory: 267MB (273844kB)
Memory in use : 46 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

15.2.2009
ISO compilation
1:27:55 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

1:27:55 PM #2 Text 0 File Isodoc.cpp, Line 6527
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

1:27:56 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3334
First writeable address = 0 (0x00000000)

1:27:56 PM #4 Text 0 File Burncd.cpp, Line 3465
Turn on Disc-At-Once, using DVD media

1:27:56 PM #5 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2249407 (499:52.07, 4393MB)

1:27:56 PM #6 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)

1:27:56 PM #7 Text 0 File DlgWaitCD.cpp, Line 2912
Recorder: TSSTcorp CD/DVDW TS-L632D, Media type: DVD-R
Disc Manufacturer: MBI 03 - RG40
Disc Application Code: 64, Disc Physical Code: 193

1:27:56 PM #8 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================

1:27:56 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 823
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2249408 (2249408) = #2249408/499:52.8
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2249408 blocks [E: TSSTcorp CD/DVDW TS-L632D]
--------------------------------------------------------------

1:27:56 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1026
Prepare [E: TSSTcorp CD/DVDW TS-L632D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4606787584, ISRC “”
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2249408 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2249408 | 0 | 0x00
2249408 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

1:27:56 PM #11 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

1:27:56 PM #12 Phase 24 File dlgbrnst.cpp, Line 1760
Caching of files started

1:27:56 PM #13 Text 0 File Burncd.cpp, Line 4298
Cache writing successful.

1:27:56 PM #14 Phase 25 File dlgbrnst.cpp, Line 1760
Caching of files completed

1:27:56 PM #15 Phase 32 File dlgbrnst.cpp, Line 1760
Simulation started at 4x (5,540 KB/s)

1:27:56 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2764
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

1:27:57 PM #17 Text 0 File DVDR.cpp, Line 3070
Recording mode: Sequential Recording Mode for Multisession

1:27:57 PM #18 Text 0 File DVDR.cpp, Line 3226
Start write address at LBA 0
DVD high compatibility mode: Yes

1:27:57 PM #19 Text 0 File Cdrdrv.cpp, Line 9288
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16…63]:
00 60 00 10 20 30 40 50 - 00 00 00 00 00 00 00 00 .`…0@P…
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

1:27:58 PM #20 Text 0 File Cdrdrv.cpp, Line 1303
13:27:58.734 - E: TSSTcorp CD/DVDW TS-L632D : Queue again later

2:58:34 PM #21 Text 0 File WriterStatus.cpp, Line 113
<E: TSSTcorp CD/DVDW TS-L632D> start writing Lead-Out at LBA 2249408 (2252C0h), length 0 blocks

2:58:34 PM #22 Text 0 File DVDR.cpp, Line 3446
EndDAO: Last written address was 2249407

2:58:42 PM #23 Phase 133 File dlgbrnst.cpp, Line 1760
Writing short lead-out

2:58:42 PM #24 Phase 33 File dlgbrnst.cpp, Line 1760
Simulation completed successfully at 4x (5,540 KB/s)

2:58:43 PM #25 Phase 36 File dlgbrnst.cpp, Line 1760
Burn process started at 4x (5,540 KB/s)

2:58:44 PM #26 Text 0 File ThreadedTransferInterface.cpp, Line 2764
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

2:58:44 PM #27 Text 0 File DVDR.cpp, Line 3070
Recording mode: Sequential Recording Mode for Multisession

2:58:44 PM #28 Text 0 File DVDR.cpp, Line 3226
Start write address at LBA 0
DVD high compatibility mode: Yes

2:58:44 PM #29 Text 0 File Cdrdrv.cpp, Line 9288
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16…63]:
00 60 00 10 20 30 40 50 - 00 00 00 00 00 00 00 00 .`…0@P…
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

2:58:57 PM #30 Text 0 File Cdrdrv.cpp, Line 1303
14:58:57.109 - E: TSSTcorp CD/DVDW TS-L632D : Queue again later

3:16:59 PM #31 SPTI -600 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 03 44 80 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x0a2a13c0: Len x10000
0x8D 91 F5 8C D9 3F C3 D0 EB 9F 0D A0 54 1B 04 1E
0x0F DD B6 53 14 45 89 E5 74 9B 6A 7E 0C 07 7E F9
0x0F 7B DD 16 F2 87 D0 C6 35 E1 3B D4 C4 89 35 0A

3:16:59 PM #32 CDR -600 File Writer.cpp, Line 301
Device not available
E: TSSTcorp CD/DVDW TS-L632D

3:17:01 PM #33 Text 0 File DVDR.cpp, Line 3446
EndDAO: Last written address was 214143

3:17:01 PM #34 Phase 133 File dlgbrnst.cpp, Line 1760
Writing short lead-out

3:34:39 PM #35 SPTI -1176 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x00
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 72

3:36:07 PM #36 CDR -1114 File WriterStatus.cpp, Line 162
Reset occurred
E: TSSTcorp CD/DVDW TS-L632D

3:36:07 PM #37 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once

3:36:08 PM #38 Phase 38 File dlgbrnst.cpp, Line 1760
Burn process failed at 4x (5,540 KB/s)

3:36:08 PM #39 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

3:36:15 PM #40 Text 0 File Cdrdrv.cpp, Line 10529
DriveLocker: UnLockVolume completed

3:36:15 PM #41 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

pls help me to solve

sujesh

There is no need to post the same question twice. :cop:
Such is against the rules, since it causes additional work for all the volunteers who are willing to help.

Thread closed.