CD burning problem (Samsung SH-S182D / TS-H652D)

vbimport

#1

[qanda]This thread is about the Samsung SH-S182D / TS-H652D. Click here to see full specs[/qanda]Hi. I have recently reinstalled windows and my cdrom reads cds but doesnt write them. In last windows it worked. I have changed cable, tested another cd rom with my computer, problem seems in configurations and drivers i think.

im using windows xp
samsung sh s182d cd-dvd rom
intel motherboard
40 pin ide cable from cd rom to motherboard
nero8 and sometimes windows explorer to burn data.

heres the log from nero8 with ANOTHER cd rom, but log is same as the one that was with my samsung rom.

1K22-0867-0795-66M4-5205-1567-****

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.3.6.0
Internal Version: 8, 3, 6, 0

Recorder: <LITE-ON COMBO SOHC-5232K>Version: NK0A - HA 1 TA 0 - 8.3.6.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <YJ5874U UJA720H >Version: 1.01 - HA 1 TA 2 - 8.3.6.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST3250620AS atapi Port 0 ID 0 DMA: On
ArrayPeripheral : MARVELL Virtual Device 1.00 mv61xx Port 4 ID 25 DMA: Off
CdRomPeripheral : LITE-ON COMBO SOHC-5232KNK0A mv61xx Port 4 ID 4 DMA: Off
CdRomPeripheral : YJ5874U UJA720H 1.01 acseo8wv Port 5 ID 0 DMA: Off

=== CDRom-Device-Map ===
LITE-ON COMBO SOHC-5232K E: CdRom0
YJ5874U UJA720H K: CdRom2

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2029MB (2078256kB)
Free physical memory: 1419MB (1453508kB)
Memory in use : 30 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

26.2.2008
CD-ROM (ISO)
9:19:39 AM #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

9:19:39 AM #2 Text 0 File Isodoc.cpp, Line 6713
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

9:19:39 AM #3 Text 0 File Burncd.cpp, Line 3238
LITE-ON COMBO SOHC-5232K
Buffer underrun protection activated

9:19:39 AM #4 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)

9:19:40 AM #5 Text 0 File ThreadedTransferInterface.cpp, Line 1027
Removed 2 run-out blocks from end of track 0. Length: 253022 -> 253020.

9:19:40 AM #6 Text 0 File Burncd.cpp, Line 3568
Turn on Track-At-Once, using CD-R/RW media

9:19:40 AM #7 Text 0 File ThreadedTransferInterface.cpp, Line 1027
Removed 2 run-out blocks from end of track 1. Length: 253022 -> 253020.

9:19:40 AM #8 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator ‘CUDFSettingsValidatorCD’
ParamMode = ‘automatic’, changing UDF partition type from ‘physical’ to ‘physical’
Changing UDF revision from ‘1.02’ to ‘1.02’

9:19:40 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1027
Removed 2 run-out blocks from end of track 1. Length: 253022 -> 253020.

9:19:40 AM #10 Text 0 File DlgWaitCD.cpp, Line 311
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 253021 ( 56:15.46)

9:19:40 AM #11 Text 0 File DlgWaitCD.cpp, Line 323
Write in overburning mode: NO (enabled: CD)

9:19:40 AM #12 Text 0 File DlgWaitCD.cpp, Line 2948
Recorder: LITE-ON COMBO SOHC-5232K;
CDR code: 00 97 26 56; OSJ entry from: Lead Data Inc.
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 1A 38 (LI 97:26.56), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

9:19:40 AM #13 Text 0 File DlgWaitCD.cpp, Line 497
>>> Protocol of DlgWaitCD activities: <<<
=========================================

9:19:40 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 754
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 253022 (253022) = #253022/56:13.47
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 253020 blocks [E: LITE-ON COMBO SOHC-5232K]
--------------------------------------------------------------

9:19:40 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 956
Prepare [E: LITE-ON COMBO SOHC-5232K] for write in TAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 518496256, ISRC “”
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 253022 | 0 | 0x00
253022 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

9:19:40 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1027
Removed 2 run-out blocks from end of track 1. Length: 253022 -> 253020.

9:19:40 AM #17 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

9:19:40 AM #18 Text 0 File Burncd.cpp, Line 4359
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

9:19:40 AM #19 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

9:19:40 AM #20 Text 0 File Burncd.cpp, Line 4481
Cache writing successful.

9:19:40 AM #21 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

9:19:40 AM #22 Phase 28 File dlgbrnst.cpp, Line 1767
Speed measurement started

9:19:40 AM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2673
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

9:19:40 AM #24 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 590400

9:19:50 AM #25 Phase 29 File dlgbrnst.cpp, Line 1716
Speed measurement completed: 317.9x (47,694 KB/s)

9:19:50 AM #26 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 24x (3,600 KB/s)

9:19:50 AM #27 Text 0 File ThreadedTransferInterface.cpp, Line 2673
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

9:19:51 AM #28 Text 0 File MMC.cpp, Line 22530
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON

9:19:51 AM #29 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

9:19:58 AM #30 SPTI -1114 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114)
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
Sense Area: 0x08 00 06 00 00 00 00 0A 00 00 00 00 29
Buffer x09c50040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

9:19:58 AM #31 CDR -1114 File Writer.cpp, Line 306
Reset occurred
E: LITE-ON COMBO SOHC-5232K

9:19:58 AM #32 SPTI -1033 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1033)
CDB Data: 0x35 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
Sense Area: 0x08 00 02 00 00 00 00 0A 00 00 00 00 04 01

9:20:10 AM #33 CDR -1033 File WriterStatus.cpp, Line 322
Drive not ready
E: LITE-ON COMBO SOHC-5232K

9:20:10 AM #34 TRANSFER -18 File WriterStatus.cpp, Line 322
Could not perform EndTrack

9:20:10 AM #35 CDR -201 File WriterStatus.cpp, Line 325
Invalid write state
E: LITE-ON COMBO SOHC-5232K

9:20:10 AM #36 TRANSFER -18 File WriterStatus.cpp, Line 325
Could not perform EndTrack

9:20:10 AM #37 Text 0 File MMC.cpp, Line 17306
<LITE-ON COMBO SOHC-5232K> start Close Track #2

9:20:10 AM #38 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 24x (3,600 KB/s)

9:20:10 AM #39 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

9:20:13 AM #40 Text 0 File Cdrdrv.cpp, Line 11450
DriveLocker: UnLockVolume completed

9:20:13 AM #41 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLMSoftwareMicrosoftWindows NTCurrentVersionWinLogonAllocateCDROMs : 0 (Security Option)

Thanks for any help.