Cant Make Data Disk - Log

vbimport

#1

I am trying to make a Data Disk with normal digital camera photos on but it wont burn! I have copied the error log can anyone help?

NT-SPTI used
Nero Version: 7.2.7.0
Internal Version: 7, 2, 7, 0

Recorder: <TOSHIBA CD/DVDW SDR5372V>Version: TU15 - HA 1 TA 1 - 7.2.7.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TOSHIBA DVD-ROM SDM2012C>Version: TU01 - HA 1 TA 0 - 7.2.7.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : TOSHIBA DVD-ROM SDM2012C atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TOSHIBA CD/DVDW SDR5372V atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST3200822AS atapi Port 1 ID 0 DMA: On
DiskPeripheral : ST3200822AS atapi Port 2 ID 0 DMA: On

=== CDRom-Device-Map ===
TOSHIBA DVD-ROM SDM2012C I: CDRom0
TOSHIBA CD/DVDW SDR5372V J: CDRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 542MB (555344kB)
Memory in use : 47 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

22.1.2007
CD-ROM (ISO)
17:20:44 #1 Text 0 File Isodoc.cpp, Line 6440
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

17:20:44 #2 Text 0 File Burncd.cpp, Line 3091
TOSHIBA CD/DVDW SDR5372V
Buffer underrun protection activated

17:20:44 #3 Text 0 File ThreadedTransfer.cpp, Line 540
ReadBuffer-Pipe got 81920KB of Memory

17:20:44 #4 Text 0 File Reader.cpp, Line 124
Reader running

17:20:44 #5 Text 0 File Writer.cpp, Line 113
Writer J: TOSHIBA CD/DVDW SDR5372V running

17:20:44 #6 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

17:20:44 #7 Text 0 File Burncd.cpp, Line 3405
Turn on Track-At-Once, using CD-R/RW media

17:20:44 #8 Text 0 File DlgWaitCD.cpp, Line 298
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 336384 ( 74:47.09)

17:20:44 #9 Text 0 File DlgWaitCD.cpp, Line 310
Write in overburning mode: NO (enabled: CD)

17:20:44 #10 Text 0 File DlgWaitCD.cpp, Line 2842
Recorder: TOSHIBA CD/DVDW SDR5372V;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

17:20:44 #11 Text 0 File DlgWaitCD.cpp, Line 482
>>> Protocol of DlgWaitCD activities: <<<
=========================================

17:20:44 #12 Text 0 File ThreadedTransferInterface.cpp, Line 848
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 336385 (336385) = #336385/74:45.10
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 336383 blocks [J: TOSHIBA CD/DVDW SDR5372V]
--------------------------------------------------------------

17:20:44 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1063
Prepare recorder [J: TOSHIBA CD/DVDW SDR5372V] for write in TAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 689223680, ISRC “”
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 336385 | -150 | 0x00
0 | 1 | 1 | 0x41 | 336385 | 0 | 0x00
336385 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

17:20:44 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1133
Removed 2 run-out blocks from end of track 1. Length: 336385 -> 336383.

17:20:44 #15 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

17:20:44 #16 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started

17:20:44 #17 Text 0 File Burncd.cpp, Line 4236
Cache writing successful.

17:20:44 #18 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed

17:20:44 #19 Phase 28 File dlgbrnst.cpp, Line 1730
Speed measurement started

17:20:44 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2722
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

17:20:59 #21 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

17:20:59 #22 Phase 29 File dlgbrnst.cpp, Line 1679
Speed measurement completed: 361x (54.158 KB/s)

17:20:59 #23 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 48x (7.200 KB/s)

17:20:59 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2722
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

17:20:59 #25 Text 0 File MMC.cpp, Line 22122
Set BUFE: Buffer underrun protection -> ON

17:23:15 #26 SPTI -1135 File SCSIPassThrough.cpp, Line 291
J: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 04 8B C0 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x04e40000: Len x10000
0xB0 94 B0 5E FF 00 A5 6A 5B B8 58 48 03 E5 C7 23
0xDE 93 4A E0 B4 30 BC 73 C8 46 C6 01 4F 94 FE 15
0xE1 FE 2E 02 4B D6 18 CA 82 48 23 EB D2 AD DA C8

17:23:15 #27 CDR -1135 File Writer.cpp, Line 302
Write error
J: TOSHIBA CD/DVDW SDR5372V

17:23:15 #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

17:23:15 #29 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
J: TOSHIBA CD/DVDW SDR5372V

17:23:15 #30 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack

17:23:15 #31 Text 0 File MMC.cpp, Line 16933
<TOSHIBA CD/DVDW SDR5372V> start Close Session

17:23:15 #32 SPTI -1046 File SCSIPassThrough.cpp, Line 291
J: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 01 02 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05

17:23:15 #33 CDR -1046 File WriterStatus.cpp, Line 250
Illegal disc
J: TOSHIBA CD/DVDW SDR5372V

17:23:15 #34 TRANSFER -19 File WriterStatus.cpp, Line 250
Could not perform Fixation

17:23:15 #35 Text 0 File WriterStatus.cpp, Line 259
falling back to disc fixation

17:23:15 #36 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 48x (7.200 KB/s)

Existing drivers:
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.32a, size=20640 bytes, created 06.04.2006 19:15:29 (Prassi/Veritas driver for win 2K)
File ‘Drivers\InCDfs.SYS’: Ver=5, 1, 0, 15, size=102912 bytes, created 22.08.2006 10:40:46 (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDpass.SYS’: Ver=5, 1, 0, 15, size=29568 bytes, created 22.08.2006 10:41:04 (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDrec.SYS’: Ver=5, 1, 0, 15, size=9984 bytes, created 22.08.2006 10:41:20 (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 1 (Security Option)


#2

Firstly disable multi-session as I’m sure you don’t really need that.

Secondly burn much slower, try 24x.

Also if you don’t use InCD then it’s best to remove it.


#3

Thanks TimC works now :slight_smile: