Can't DQ Scan with internal EW-1621

vbimport

#1

I didn’t know if this was a problem with the drive or CDSpeed, so I posted it here. I purchased 3 of these externals, always with the thought of using them mainly for scanning. I placed one in my tower today & thought at long last I am going to be able to DQ Scan with a BenQ, wrong. I can’t get past the point in the pic. I have tried CDSpeed 4775, 47715 & 47716.


#2

I could be wrong and it’s been awhile but i think it’s the firmware…although you might need an older and way older actually version of CD Speed.

Edit:
Must be the firmware beef. You might try 47N9. Been so long i don’t remember sorry.


#3

Thanks for the quick reply Bob. I have never crossflashed before, could this drive be crossflashed to a 1620 & if so how would I go about doing it, then would that worK? I did go from 47P9 to 47L9 & that didn’t work earlier.


#4

[QUOTE=beef barley;2077056]Thanks for the quick reply Bob. I have never crossflashed before, could this drive be crossflashed to a 1620 & if so how would I go about doing it, then would that worK?[/QUOTE]Give 47N9 a try and see > http://www.benq-eu.com/support/downloads/downloads.cfm?product=671&page=downloads&dtype=B


#5

beef if you want to crossflash to 1620 Pro have a read here > http://club.cdfreaks.com/f92/bqflasher-149980/


#6

I think I will have to, thanks.




#7

Nice scan beef :slight_smile:


#8

This would be the real one, thanks to Bob.

http://http://club.cdfreaks.com/2077093-post2429.html


#9

Still a pretty good looking scan.

BTW, you’ve got too many http’s in your link.


#10

[quote=LOCOENG;2077096]Still a pretty good looking scan.

BTW, you’ve got too many http’s in your link.[/quote]

Your right, but I can’t change it now, the scan is in Post your BenQ 1620 results or something.


#11

heyyo beef…looks like you need to change your sig…

By the way nice burn and glad you got it flashed ok.


#12

[quote=Bob;2077206]heyyo beef…looks like you need to change your sig…

By the way nice burn and glad you got it flashed ok.[/quote]

Changing the sig right away, thanks for putting me on to the tool to do it with.


#13

That is not a good burn. It is not checking for PIFs. Look at the scan again real close.


#14

[QUOTE=pfloyd1;2077224]That is not a good burn. It is not checking for PIFs. Look at the scan again real close.[/QUOTE]I was talking about the link in post #8. Even though jitta is a little high.

And yes 47x9 f/w’s don’t report PIF’s.


#15

I can’t get that link. Unavailable.


#16

[QUOTE=pfloyd1;2077320]I can’t get that link. Unavailable.[/QUOTE]yeah lol it has to many http’s so here try this one > http://club.cdfreaks.com/2077093-post2429.html