Can't burn

vbimport

#1

This is a brand new DVD writer, I only wrote one CD with it, but it won’t burn. I keep getting the same error. I have a log from Nero.

=========================================================

Windows XP 6.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.10.1.0
Internal Version: 7, 10, 1, 0

Recorder: <HL-DT-ST DVDRAM GH22NS40>Version: NL02 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <ZGZA DAFS9U3CD >Version: 1.03 - HA 1 TA 2 - 7.10.1.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : ZGZA DAFS9U3CD 1.03 ap040t1r Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GH22NS40 E: CdRom0
ZGZA DAFS9U3CD F: CdRom2

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1022MB (1047032kB)
Free physical memory: 421MB (431520kB)
Memory in use : 58 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

31.12.2009
Burn DVD Image
11:14:26 #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

11:14:27 #2 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media

11:14:27 #3 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286951 (508:12.51, 4466MB)

11:14:27 #4 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

11:14:27 #5 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: HL-DT-ST DVDRAM GH22NS40, Media type: DVD-R
Disc Manufacturer: MBI 01 - RG40
Disc Application Code: 64, Disc Physical Code: 193

11:14:27 #6 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:14:27 #7 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2286952 (2286952) = #2286952/508:12.52
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286952 blocks [E: HL-DT-ST DVDRAM GH22NS40]
--------------------------------------------------------------

11:14:27 #8 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: HL-DT-ST DVDRAM GH22NS40] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4683677696, ISRC “”
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2286952 | 2286952 | 0x00
2286952 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

11:14:27 #9 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

11:14:27 #10 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

11:14:27 #11 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started

11:14:27 #12 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.

11:14:27 #13 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed

11:14:27 #14 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 4x (5,540 KB/s)

11:14:27 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

11:14:27 #16 Text 0 File DVDR.cpp, Line 3225
Recording mode: Sequential Recording Mode

11:14:27 #17 Text 0 File DVDR.cpp, Line 3381
Start write address at LBA 0
DVD high compatibility mode: Yes

11:14:27 #18 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16…63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`…0@P…!..
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

11:14:27 #19 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

11:24:29 #20 SPTI -600 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x09340040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

11:24:29 #21 CDR -600 File Writer.cpp, Line 303
Device not available
E: HL-DT-ST DVDRAM GH22NS40

11:24:31 #22 Text 0 File DVDR.cpp, Line 3783
EndDAO: Last written address was -1 (FFFFFFFFh)

11:24:31 #23 CDR -1114 File WriterStatus.cpp, Line 162
Reset occurred
E: HL-DT-ST DVDRAM GH22NS40

11:24:31 #24 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once

11:24:33 #25 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 4x (5,540 KB/s)

11:24:34 #26 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

11:24:37 #27 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed

11:24:37 #28 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : (Security Option)

=========================================================


#2

Hi,

you happen to run Windows 7?
Nero 7 might not be Win7 compatible, so please try another application. I’d suggest ImgBurn. It’s free and it is reported to work with Windows 7.

Michael


#3

With ImgBurn is the same thing. I can’t even burn the Lead In.

Here is the log:

================================================================

I 13:56:37 ImgBurn Version 2.5.0.0 started!
I 13:56:37 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600)
I 13:56:37 Total Physical Memory: 1.047.032 KB - Available: 425.472 KB
W 13:56:37 SPTD can have a detrimental effect on drive performance.
I 13:56:38 Initialising SPTI…
I 13:56:38 Searching for SCSI / ATAPI devices…
I 13:56:38 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM!
I 14:43:10 Operation Started!
I 14:43:10 Source File: D:\Torenturi\Download\Avatar.2009.DVDR.PAL.Custom-TBS\AVATAR_2009_TBS.ISO
I 14:43:10 Source File Sectors: 2.039.510 (MODE1/2048)
I 14:43:10 Source File Size: 4.176.916.480 bytes
I 14:43:10 Source File Volume Identifier: AVATAR_2009_TBS
I 14:43:10 Source File Volume Set Identifier: 000FD671DVDSHRNK
I 14:43:10 Source File Implementation Identifier: DVD Shrink
I 14:43:10 Source File File System(s): ISO9660; UDF (1.02)
I 14:43:10 Destination Device: [1:0:0] HL-DT-ST DVDRAM GH22NS40 NL02 (E:) (ATA)
I 14:43:10 Destination Media Type: DVD-R (Disc ID: MBI 01RG40) (Speeds: 4x; 8x; 16x)
I 14:43:10 Destination Media Sectors: 2.297.888
I 14:43:10 Write Mode: DVD
I 14:43:10 Write Type: DAO
I 14:43:10 Write Speed: 4x
I 14:43:10 Link Size: Auto
I 14:43:10 Lock Volume: Yes
I 14:43:10 Test Mode: No
I 14:43:10 OPC: No
I 14:43:10 BURN-Proof: Enabled
I 14:43:13 Filling Buffer… (40 MB)
I 14:43:17 Writing LeadIn…

============================================================

And it stays like that by 2 hours :frowning:


#4

[QUOTE=mmimaa;2481548]

W 13:56:37 SPTD can have a detrimental effect on drive performance.[/quote]Thhis might be the culprit.

I 14:43:10 Source File: D:\Torenturi\Download\Avatar.2009.DVDR.PAL.Custom-TBS\AVATAR_2009_TBS.ISO

Sorry, we can’t give you any further support here. You might re-read the forum rules please.

Michael
Thread closed.