Can't Burn Two DVD's At Once After Update

Burning Software Nero & InCD
#1

I am having a problem burning two dvd’s at once since i updated Nero. I was previously using Nero 7 ultra v.7.0.0.0. I dl’d an update from the Nero website to v. 7.9.6.0. After installing, i cannot burn two at once. The previous version had no problems. Nothing else has changed. After i hit burn, it immediatly says it’s done “DVD-video files sorted” Any idea’s?

RedDog

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.9.6.0
Internal Version: 7, 9, 6, 0

Recorder: <LITE-ON DVDRW SH-16A7S> Version: WS04 - HA 1 TA 1 - 7.9.6.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
Recorder: <LITE-ON DVDRW LH-20A1S> Version: 9L03 - HA 1 TA 2 - 7.9.6.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON DVD SHD-16P1S >Version: GS07 - HA 1 TA 0 - 7.9.6.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : LITE-ON DVD SHD-16P1S atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380817AS iaStor Port 2 ID 0 DMA: On
DiskPeripheral : ST3500630AS iaStor Port 2 ID 1 DMA: Off
CdRomPeripheral : LITE-ON DVDRW SH-16A7S iaStor Port 2 ID 2 DMA: Off
CdRomPeripheral : LITE-ON DVDRW LH-20A1S iaStor Port 2 ID 3 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVD SHD-16P1S D: CdRom0
LITE-ON DVDRW SH-16A7S F: CdRom1
LITE-ON DVDRW LH-20A1S G: CdRom2

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048032kB)
Free physical memory: 720MB (737548kB)
Memory in use : 29 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

13.6.2007
UDF/ISO compilation
3:56:37 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

3:56:37 PM #2 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

3:56:38 PM #3 Phase 112 File dlgbrnst.cpp, Line 1762
DVD-Video files reallocation started

3:56:38 PM #4 Phase 114 File dlgbrnst.cpp, Line 1762
DVD-Video files reallocation completed (no file modified)

3:56:38 PM #5 Text 0 File Isodoc.cpp, Line 6663
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

3:56:38 PM #6 Phase 111 File dlgbrnst.cpp, Line 1762
DVD-Video files sorted

3:56:38 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)

3:56:38 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)

3:56:38 PM #9 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media

3:56:38 PM #10 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media

3:56:39 PM #11 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286143 (508:01.68, 4465MB)

3:56:39 PM #12 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

3:56:39 PM #13 Text 0 File DlgWaitCD.cpp, Line 2964
Recorder: LITE-ON DVDRW SH-16A7S, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193

3:56:39 PM #14 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

3:56:39 PM #15 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286143 (508:01.68, 4465MB)

3:56:39 PM #16 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

3:56:39 PM #17 Text 0 File DlgWaitCD.cpp, Line 2964
Recorder: LITE-ON DVDRW LH-20A1S, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193

3:56:39 PM #18 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

3:56:39 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286144 (2286144) = #2286144/508:1.69
relocatable, disc pos for caching/writing not required/ required
-> TRM_ILLEGAL_MODE, 2048, config 0, wanted index0 0 blocks, length 1 blocks [F: LITE-ON DVDRW SH-16A7S]
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286144 blocks [G: LITE-ON DVDRW LH-20A1S]
--------------------------------------------------------------

3:56:39 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 533
PrepareRecordersForWrite () called for all drives(INTPTRTYPE)(m_pGenerator && m_pProgress && this->RecordersPreparedForWrite ())

3:56:39 PM #21 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

3:56:39 PM #22 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

#2

From the log appear that DMA is disabled.

Enable it again. This should solve :slight_smile:

#3

But would updating Nero have changed that? I used to burn two, before i updated with no problem. I can burn one at a time now just fine, just not the two. I’ll check it and see though.
Also, i am running Sata2 hdd’s, and Sata burners, so would the DMA even be relevant? The only thing IDE is the dvd-rom…
I really don’t think it is a hardware issue. I tried updating Nero on my other machine, and it did the same thing. C2D E6600, 2 gigs ddr2 800, 2-80 gig Sata2 hdd’s (raid 0), 250 gig sata2, 320 gig Sata2, 2- lite-on 16X Sata dvd-rw, lite-on dvd-rom. I could burn two at once before update. After update, Nope. It says done “dvd-video files sorted”.

                                                           Thx
#4

You’re using SATA burners so DMA isn’t relevant as you correctly assume so don’t worry about that.

#5

Create images, then use Imgburn.

#6

Update: I have been playing with Nero, and i cannot burn 2 at once of anything, not just dvd’s, but cd’s to. I tried cd-rom, audio, video, also dvd-rom. If i uncheck smartburn, it still does not burn the disk, but says done, and does not pop up a window saying so. The program locks up and the close button X is not highlighted. I have to close from the task manager to exit. Any idea’s??? I’m going to find a slightly older version of nero, 7.8.x.x, and see if it does the same thing!

#7

You might try the latest version of 6.

#8

I was using Nero 6.xxx. I can’t remember which though. I upgraded to 7.0.0.0 for the enhanced video capabilities. After the switch, I had trouble burning an audio cd. Replacing the mp3pro.dll file in v.7 with the one from v.6 fixed that, but i figured the Nero engineers had a better fix than that, so I went to 7.9.6.0… So here I am with another problem. I am currently dl’ing some older versions to try. 7.7.5.1., 7.5.1.1., 7.2.7.0., & 7.0.8.2. I’m gonna go through them all until i find one that will do everything i need it to without problems, patches, or fixes…there has to be ONE!

#9

nero 7.9.6.0 also created the same problem for me, and some others on another site, went back to 7.8.5.0 and it works again fine.