Can't burn in 3.0.1.14 or NeroVision Express 2

vbimport

#1

I’ve found this software very frustrating. The features are great and the interface easy, but the delivery is just not working. I’ve got two major problems, the other is a subject of a separate post.

The worst is that I can’t burn a DVD from the project I’ve spent many, many hours creating.

I started with NeroVision Express 2 purchased in the retail box. When I go to burn a DVD it shows all the progress in the world, until the actual burn. It shows about 1.5 hours needed to burn the DVD. It gets about 80% through the process, ejects the DVD, then hangs. I have to End Task to close it, the Abort key doesn’t work.

So, I upgraded to 3.01.14 in the hopes that the update would cure my problem. No such luck. Now it shows over 5 hours (!!) necessary to burn a DVD. After about 2 hours it ejects the DVD and I get a “can’t write to device” error. The error log is below. I’ve only included the last part of the log. I’m running a Sony DVD read/writer that accepts all formats known to man. It is in a Dell computer with Pentium IV at 2.56gh and 512 mg ram. I’m running Windows XP Home with Service Pack 2 installed.

Any help would be much appreciated.

[07:37:24] DVDEngine ---- DVD Structure: Physical Format Information (00h) ----
[07:37:24] DVDEngine Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
[07:37:24] DVDEngine Book Type: DVD-R (2), Part Version: 5
[07:37:24] DVDEngine Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
[07:37:24] DVDEngine Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
[07:37:24] DVDEngine Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
[07:37:24] DVDEngine Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
[07:37:24] DVDEngine End Physical Sector Number of Data Area: 26127F h
[07:37:24] DVDEngine End Sector Number in Layer 0: 0 h
[07:37:24] DVDEngine Data in Burst Cutting Area (BCA) does not exist
[07:37:24] DVDEngine Start sector number of the current Border-Out: 0 h
[07:37:24] DVDEngine Start sector number of the next Border-In: 0 h
[07:37:24] DVDEngine Media Specific [16…63]:
[07:37:24] DVDEngine 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
[07:37:24] DVDEngine 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
[07:37:24] DVDEngine 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
[07:37:24] DVDEngine
[07:37:24] DVDEngine 7:21:03 AM #9 Text 0 File BurnAtOnceRecorder.cpp, Line 990
[07:37:24] DVDEngine Estimated filesystem size: 1072
[07:37:24] DVDEngine
[07:37:24] DVDEngine 7:21:03 AM #10 Phase 36 File APIProgress.cpp, Line 276
[07:37:24] DVDEngine Burn process started at 4x (5,540 KB/s)
[07:37:24] DVDEngine
[07:37:24] DVDEngine 7:21:03 AM #11 Text 0 File BurnAtOnceRecorder.cpp, Line 1672
[07:37:24] DVDEngine Buffering files started
[07:37:24] DVDEngine
[07:37:24] DVDEngine 7:21:03 AM #12 Text 0 File BurnAtOnceRecorder.cpp, Line 1393
[07:37:24] DVDEngine Buffering VIDEO_TS.VOB
[07:37:24] DVDEngine
[07:37:24] DVDEngine 7:21:03 AM #13 Text 0 File BurnAtOnceRecorder.cpp, Line 2548
[07:37:24] DVDEngine Finished buffering file VIDEO_TS.VOB of size 149504 bytes (73 sectors)
[07:37:24] DVDEngine
[07:37:24] DVDEngine 7:21:03 AM #14 Text 0 File BurnAtOnceRecorder.cpp, Line 2615
[07:37:24] DVDEngine Finished writing file VIDEO_TS.VOB of size 149504 bytes (73 sectors)
[07:37:24] DVDEngine
[07:37:24] DVDEngine 7:21:03 AM #15 Text 0 File BurnAtOnceRecorder.cpp, Line 2628
[07:37:24] DVDEngine Buffering files finished successfully
[07:37:24] DVDEngine
[07:37:24] DVDEngine 7:21:03 AM #16 Text 0 File BurnAtOnceRecorder.cpp, Line 664
[07:37:24] DVDEngine Reserved fragment at 0. Length: 1200
[07:37:24] DVDEngine
[07:37:24] DVDEngine 7:21:03 AM #17 Text 0 File BurnAtOnceRecorder.cpp, Line 1855
[07:37:24] DVDEngine Reserved start fragment at 0
[07:37:24] DVDEngine
[07:37:24] DVDEngine 7:21:03 AM #18 Text 0 File BurnAtOnceRecorder.cpp, Line 664
[07:37:24] DVDEngine Reserved fragment at 1200. Length: 32
[07:37:24] DVDEngine
[07:37:24] DVDEngine 7:21:03 AM #19 Text 0 File BurnAtOnceRecorder.cpp, Line 1387
[07:37:24] DVDEngine Writing VTS_01_1.VOB at sector 1232
[07:37:24] DVDEngine
[07:37:24] DVDEngine 7:37:24 AM #20 SCSI -1106 File Cdrdrv.cpp, Line 1430
[07:37:24] DVDEngine SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0C40C000
[07:37:24] DVDEngine Status: 0x04 (0x01, SCSI_ERR)
[07:37:24] DVDEngine HA-Status 0x00 (0x00, OK)
[07:37:24] DVDEngine TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
[07:37:24] DVDEngine Sense Key: 0x03 (KEY_MEDIUM_ERROR)
[07:37:24] DVDEngine Sense Code: 0x73
[07:37:24] DVDEngine Sense Qual: 0x03
[07:37:24] DVDEngine CDB Data: 0x2A 0x00 0x00 0x00 0x04 0xE0 0x00 0x00 0x10 0x00 0x00 0x00
[07:37:24] DVDEngine Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
[07:37:24] DVDEngine 0x00 0x00 0x00 0x00 0x73 0x03
[07:37:24] DVDEngine
[07:37:24] DVDEngine 7:37:24 AM #21 Text 0 File BurnAtOnceRecorder.cpp, Line 2160
[07:37:24] DVDEngine Failed to write 48 sectors at 1232
[07:37:24] DVDEngine
[07:37:24] DVDEngine 7:37:24 AM #22 Phase 179 File APIProgress.cpp, Line 276
[07:37:24] DVDEngine Writing file to disc failed
[07:37:24] DVDEngine
[07:37:24] DVDEngine Existing drivers:
[07:37:24] DVDEngine File ‘Drivers\ADPU160M.SYS’: Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM
[07:37:24] DVDEngine File ‘Drivers\CDRALW2K.SYS’: Ver=5.3.4.21, size=23436 bytes, created 12/17/2002 11:32:46 AM
[07:37:24] DVDEngine Registry Keys:
[07:37:24] DVDEngine HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
[07:37:24] DVDEngine _Xcept (): Signalling Exception: 129 NeroBAOWriteToFile() returned error condition _BAOFile::Write()
[07:37:25] DVDEngine ********END: _VOBS - Process VOB
[07:37:25] DVDEngine ******END: VTSTT_VOBS#1 - Process Create
[07:37:25] DVDEngine ****END: Create - VTSTT_VOBS#1
[07:37:25] DVDEngine **END: _DVDVideo - Create
[07:37:25] DVDEngine ########################################################################################
[07:37:25] DVDEngine ERROR
[07:37:25] DVDEngine cause: 66 (write_fault)
[07:37:25] DVDEngine source: _VOBS
[07:37:25] DVDEngine description: The system cannot write to the specified device.
[07:37:25] DVDEngine ########################################################################################
[07:37:25] DVDEngine **BEGIN: IDVDSessionBaseImpl - Clear
[07:37:25] DVDEngine **END: IDVDSessionBaseImpl - Clear
[07:37:25] DVDEngine END: IDVDVideoSessionImpl - CreateDisc
[07:38:35] NeroAPI Burn process failed at 4x (5,540 KB/s)
[07:38:35] DVDEngine BEGIN: IDVDSessionBaseImpl - EndDiscAccess
[07:38:35] DVDEngine …Flags=0
[07:38:35] DVDEngine **BEGIN: _MediaAccess::Release ()
[07:38:35] DVDEngine ****BEGIN: _MediaAccess::~_MediaAccess ()
[07:38:35] DVDEngine ****END: _MediaAccess::~_MediaAccess ()
[07:38:35] DVDEngine **END: _MediaAccess::Release ()
[07:38:35] DVDEngine END: IDVDSessionBaseImpl - EndDiscAccess
[07:38:35] DVDEngine BEGIN: IDVDSessionBaseImpl - RegisterCallback
[07:38:35] DVDEngine …Session callback unregistered…
[07:38:35] DVDEngine END: IDVDSessionBaseImpl - RegisterCallback
[07:38:36] GCHW Node added: Microsoft Kernel Wave Audio Mixer
[07:39:08] GCHW Node removed: Microsoft Kernel Wave Audio Mixer