Can't burn image

Hi…
i’m new here. Just bought cd burner (IMATION) and use NERO software. Try to burn image into CD-RW but got an error.This is the log error that i’ve got:

Windows 2000 5.0
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead
ero\Wnaspi32.dll’: Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 4:33:44 PM
Nero version: 6.3.1.26 (Nero Express)
Recorder: <Imation IMW523252IC> Version: 2SI1 - HA 0 TA 0 - 6.3.1.26
Adapter driver: <atapi> HA 0
Drive buffer : 1536kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <Imation IMW523252IC >Version: 2SI1 - HA 0 TA 0 - 6.3.1.26
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : Imation IMW523252IC atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : ATAPI CD-ROM DRIVE-50X atapi Port 0 ID 1 DMA: Off
DiskPeripheral : ST340014A 3.06 viadsk Port 1 ID 0 DMA: Off

=== CDRom-Device-Map ===
Imation IMW523252IC E: CDRom0
ATAPI CD-ROM DRIVE-50X F: CDRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 142MB (145980kB)
Memory in use : 44 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

27.2.2000
Video CD
8:57:24 PM #1 Text 0 File VCDDoc.cpp, Line 1481
VideoCD document burn settings

Compilation type : VCD
Menu : Disable
Picture in separate folder : TRUE
Folder name :PICTURES
Use CD-I : TRUE
CD-I configuration : CONTROLS=ALL

CURCOL=YELLOW

PSDCURCOL=RED

PSDCURSHAPE=ARROW

CENTRTRACK=2

AUTOPLAY=AUTO_ON

DUALCHAN=DUAL_ON

TIMECODE_X=64

TIMECODE_Y=100

LOTID_X=64

LOTID_Y=64

ALBUM=STANDARD
Encoding bitrate mode : User defined (kb/s)

8:57:24 PM #2 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings

Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 2 / XA
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

8:57:24 PM #3 Text 0 File VCDDoc.cpp, Line 2774
VCD options:

Create standard compliant CD: YES
Encoding resolution: NTSC

8:57:24 PM #4 Phase 90 File dlgbrnst.cpp, Line 1855
Buffer Underrun Protection activated

8:57:24 PM #5 Text 0 File Reader.cpp, Line 126
Reader running

8:57:24 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

8:57:24 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

8:57:25 PM #8 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using CD-R/RW media

8:57:25 PM #9 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 22089 ( 4:56.39)

8:57:25 PM #10 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)

8:57:25 PM #11 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: Imation IMW523252IC;
CDRW code: 00 97 26 65; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: B3 00 CE, 2: 61 1A 41 (LI 97:26.65), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 24 1A BC, 2: 26 B2 26, 3: 00 80 80 (invalid)

8:57:25 PM #12 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<

8:57:25 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_2336 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 21640 (21640) = #21640/4:48.40
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_ULTRARAW96_MODE2, 2448, config 0x4, wanted index0 0 blocks, length 21640 blocks [Imation IMW523252IC ]
1: TRM_DATA_MODE2_2336 (<< dummy >>)
2 indices, index0 (150) not provided
original disc pos #0 + 300 (300) = #300/0:4.0
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_ULTRARAW96_MODE2, 2448, config 0x4, wanted index0 0 blocks, length 300 blocks [Imation IMW523252IC ]

8:57:25 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [Imation IMW523252IC ] for write in raw writing
DAO infos:

MCN: “”
TOCType: 0x20; Session Closed, disc fixated
Tracks 1 to 2:
1: TRM_ULTRARAW96_MODE2, 2448/0x04, FilePos 0 367200 53341920, ISRC “”
2: TRM_ULTRARAW96_MODE2, 2448/0x04, FilePos 53341920 53709120 54443520, ISRC “”
DAO layout:

_Start|___Track|Idx|RecDep|CtrlAdr
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
21640 | 2 | 0 | 0x00 | 0x41
21790 | 2 | 1 | 0x00 | 0x41
22090 | lead-out | 1 | 0x00 | 0x41

8:57:25 PM #15 Phase 73 File dlgbrnst.cpp, Line 1855
Preparing items

8:57:25 PM #16 Text 0 File VCDCompilationImpl.cpp, Line 871
Preparation of item ‘amir 13 039.JPG’ failed.

Existing drivers:
File ‘Drivers\InCDfs.SYS’: Ver=4, 3, 0, 3, size=92928 bytes, created 8/27/2004 9:02:30 AM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDpass.SYS’: Ver=4, 3, 0, 3, size=28672 bytes, created 8/27/2004 9:02:46 AM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDrec.SYS’: Ver=4, 3, 0, 3, size=7680 bytes, created 8/27/2004 9:04:16 AM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\atapi.sys’: Ver=5.00.2195.1207, size=85072 bytes, created 7/26/2000 7:00:00 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

You only need to post the question once. Cross posting , as it’s called, is against the forum rules.

sorry…how to delete?

Can’t delete, just leave it. You never know someone may answer it anyway.

i’ve tried to enable DMA as you’ve said but my PC got hang…don’t know what to do…still can’t burn image…i can burn data

your using a very old nero get 6.6.0.16 , if that wont help then uninstall incd ive read in numerious threads that it conflicts with nero