I have been able to burn DVDs using DVDShrink/Decrypter. These were taking hours to do (2.5) and I wasn’t bothered until a friend said his were taking 30 minutes!
So I updated my firmware (DRVUPDATE.COM) and the rip sped increased(?) and teh burn rate increased dramatically. However, every time I now get a write fail and therefore I cannot burn any movies. I can still copy data to a DVD but I use XP and not Nero 6 to do this. I am completely lost. I have an Emprex Dual Layer 16X Writer and my last two log files are below. Please help!
Burn Error -1
Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 01:20:56
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:34
Nero API version: 6.6.0.13
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 13c
Recorder: <DVDRW IDE 16X> Version: A091 - HA 1 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : ST380020A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8160B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : DVDRW IDE 16X atapi Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8160B Q: CDRom0
DVDRW IDE 16X D: CDRom1
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 180MB (184500kB)
Memory in use : 64 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
23.1.2006
NeroAPI
23:24:09 #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
23:24:09 #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
23:24:09 #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
23:24:09 #4 Text 0 File Reader.cpp, Line 127
Reader running
23:24:09 #5 Text 0 File Writer.cpp, Line 122
Writer DVDRW IDE 16X running
23:24:09 #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
23:24:09 #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
23:24:09 #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
23:24:10 #9 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
23:24:17 #10 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
23:24:17 #11 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO
23:24:17 #12 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: DVDRW IDE 16X, Media type: DVD+RW
Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 1
23:24:17 #13 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
23:24:17 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [DVDRW IDE 16X]
--------------------------------------------------------------
23:24:17 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [DVDRW IDE 16X] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00
23:24:18 #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
23:24:18 #17 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
23:24:18 #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
23:24:18 #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
23:24:19 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
23:24:19 #21 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: RICOHJPN
Media type ID: W11
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16…63]:
00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 …RICOHJPNW11.9
23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #…h.&…p.(…
6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("…
23:24:19 #22 Text 0 File DVDR.cpp, Line 5431
Drive: DVDRW IDE 16X
Book Type request [BTC]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
23:24:19 #23 CDR -1211 File DVDR.cpp, Line 4777
Book Type set to: DVD-ROM
23:24:19 #24 Text 0 File DVDPlusRW.cpp, Line 652
Start write address at LBA 0
DVD high compatibility mode: Yes
23:49:28 #25 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x00CB0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x08
CDB Data: 0x2A 0x00 0x00 0x20 0xCB 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x08
23:49:28 #26 CDR -1135 File Writer.cpp, Line 311
Write error
23:49:28 #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
23:49:29 #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
23:49:29 #29 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xFA 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xAA 0xFF
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
23:49:29 #30 Text 0 File DVDR.cpp, Line 5431
Drive: DVDRW IDE 16X
Book Type request [BTC]: DVD+RW
Changing the Book Type was finished with error, return code -1066
23:49:29 #31 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 4x (5,540 KB/s)
23:49:29 #32 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
23:49:29 #33 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
23:49:30 #34 SCSI -1196 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x08065200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
CDB Data: 0xFA 0x01 0x00 0x00 0x00 0x00 0x00 0x04 0x00 0x00 0xAA 0xFF
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x3A 0x02
Existing drivers:
File ‘Drivers\ASPI32.SYS’: Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 00:53:02
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.28a, size=20640 bytes, created 11/03/2005 22:28:13 (Prassi/Veritas driver for win 2K)
File ‘Drivers\InCDfs.SYS’: Ver=4, 3, 14, 1, size=99456 bytes, created 12/04/2005 10:07:50 (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDpass.SYS’: Ver=4, 3, 14, 1, size=29056 bytes, created 12/04/2005 10:07:30 (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDrec.SYS’: Ver=4, 3, 14, 1, size=8704 bytes, created 12/04/2005 10:07:54 (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Burn Error -2
Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 01:20:56
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:34
Nero API version: 6.6.0.13
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 13c
Recorder: <DVDRW IDE 16X> Version: A091 - HA 1 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : ST380020A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8160B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : DVDRW IDE 16X atapi Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8160B Q: CDRom0
DVDRW IDE 16X D: CDRom1
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 149MB (152732kB)
Memory in use : 70 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
24.1.2006
NeroAPI
00:25:41 #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
00:25:41 #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
00:25:41 #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
00:25:42 #4 Text 0 File Reader.cpp, Line 127
Reader running
00:25:42 #5 Text 0 File Writer.cpp, Line 122
Writer DVDRW IDE 16X running
00:25:42 #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
00:25:42 #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
00:25:42 #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
00:25:42 #9 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
00:25:42 #10 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
00:25:42 #11 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO
00:25:42 #12 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: DVDRW IDE 16X, Media type: DVD-R
Disc Manufacturer: MCC 02 - RG20
Disc Application Code: 64, Disc Physical Code: 193
00:25:42 #13 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
00:25:42 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [DVDRW IDE 16X]
--------------------------------------------------------------
00:25:42 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [DVDRW IDE 16X] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00
00:25:43 #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
00:25:43 #17 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
00:25:43 #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
00:25:43 #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11,080 KB/s)
00:25:43 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
00:25:43 #21 Text 0 File DVDR.cpp, Line 2267
Recording mode: Sequential Recording Mode
00:25:43 #22 Text 0 File Mmc.cpp, Line 21469
Set BUFE: Super Link -> ON
00:25:43 #23 Text 0 File DVDR.cpp, Line 2421
Start write address at LBA 0
DVD high compatibility mode: Yes
00:25:43 #24 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16…63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00:25:59 #25 Text 0 File Cdrdrv.cpp, Line 1288
00:25:59.968 - DVDRW IDE 16X\H1 T1 : Queue again later
01:11:14 #26 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x00CA0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x12 0x16 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
01:11:14 #27 CDR -1135 File Writer.cpp, Line 311
Write error
01:11:14 #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
01:11:14 #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
01:11:14 #30 Text 0 File DVDR.cpp, Line 2658
EndDAO: Last written address was 1185471
01:11:14 #31 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 8x (11,080 KB/s)
01:11:14 #32 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
01:11:14 #33 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
01:11:19 #34 SCSI -1196 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x084F5200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
CDB Data: 0xFA 0x01 0x00 0x00 0x00 0x00 0x00 0x04 0x00 0x00 0xAA 0xFF
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x3A 0x02
Existing drivers:
File ‘Drivers\ASPI32.SYS’: Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 00:53:02
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.28a, size=20640 bytes, created 11/03/2005 22:28:13 (Prassi/Veritas driver for win 2K)
File ‘Drivers\InCDfs.SYS’: Ver=4, 3, 14, 1, size=99456 bytes, created 12/04/2005 10:07:50 (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDpass.SYS’: Ver=4, 3, 14, 1, size=29056 bytes, created 12/04/2005 10:07:30 (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDrec.SYS’: Ver=4, 3, 14, 1, size=8704 bytes, created 12/04/2005 10:07:54 (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
cheers
71peak
PS I am using good quality discs, Verbatim, Maxell, Imation. Fail happens with 4x, 8x and 16x. AND Both DVD-/+R. The writer is supposed to write the lot btw…