[qanda]This thread is about the Plextor PX-810SA. Click here to see full specs[/qanda]Hi all!
I bought the 810 sata drive and i was burning dvd’s with no problem.
I needed to burn the iso for Windows Memory Diagnostic from microsoft so i tried to burn in cd …disaster .
I burned 3 different cdroms TDK Intenso and Verbatim in my main pc and in my second pc and all the time the cd was failed
With the tdk the speed drops to x10 but wen i use Intenso the speed goes to 40x .If i try again TDK it goes x40
The same iso file is succesfuly written to my plextor px-716A at 48x that i also have so there is no issue with the iso file.
I have the drive for 15 days so i think i can return it and try to replace it with a new one but how to explain that i cannot write only iso cd’s
Any ideas?
Btw the iso file is downloaded from here “http://oca.microsoft.com/en/mtinst.exe”
Log Follows from my last failed burn
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 8.3.6.0
Internal Version: 8, 3, 6, 0
Recorder: <PLEXTOR DVDR PX-810SA> Version: 1.01 - HA 1 TA 0 - 8.3.6.0
Adapter driver: <Serial ATA> HA 1
Drive buffer : 2000kB
Bus Type : default
CD-ROM: <PLEXTOR DVDR PX-810SA >Version: 1.01 - HA 1 TA 0 - 8.3.6.0
Adapter driver: <Serial ATA> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : PLEXTOR DVDR PX-810SA atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD5000AAKS-00A7B0 atapi Port 1 ID 0 DMA: On
ArrayPeripheral : MARVELL Virtual Device 1.00 mv61xx Port 4 ID 20 DMA: Off
=== CDRom-Device-Map ===
PLEXTOR DVDR PX-810SA D: CdRom0
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2046MB (2096108kB)
Free physical memory: 1480MB (1515560kB)
Memory in use : 27 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
19.8.2008
CD Image
06:41:48 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
06:41:48 #2 Text 0 File Burncd.cpp, Line 3238
PLEXTOR DVDR PX-810SA
BURN-Proof activated
06:41:49 #3 Text 0 File Burncd.cpp, Line 3568
Turn on Disc-At-Once, using CD-R/RW media
06:41:51 #4 Text 0 File DlgWaitCD.cpp, Line 311
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 299 ( 0:05.74)
06:41:51 #5 Text 0 File DlgWaitCD.cpp, Line 323
Write in overburning mode: NO (enabled: CD)
06:41:51 #6 Text 0 File DlgWaitCD.cpp, Line 2948
Recorder: PLEXTOR DVDR PX-810SA;
CDR code: 00 97 22 67; OSJ entry from: Daxon Technology, Inc.
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 16 43 (LI 97:22.67), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: FF FF FF (invalid), 2: FF FF FF (invalid), 3: FF FF FF (invalid)
06:41:51 #7 Text 0 File DlgWaitCD.cpp, Line 497
>>> Protocol of DlgWaitCD activities: <<<
=========================================
06:41:51 #8 Text 0 File ThreadedTransferInterface.cpp, Line 754
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 300 (300) = #300/0:4.0
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 149 blocks [D: PLEXTOR DVDR PX-810SA]
--------------------------------------------------------------
06:41:54 #9 Text 0 File ThreadedTransferInterface.cpp, Line 956
Prepare [D: PLEXTOR DVDR PX-810SA] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 921600, ISRC “”
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 300 | 149 | 0x00
300 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
06:41:56 #10 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
06:41:56 #11 Text 0 File Burncd.cpp, Line 4359
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
06:41:56 #12 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started
06:41:56 #13 Text 0 File Burncd.cpp, Line 4481
Cache writing successful.
06:41:56 #14 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed
06:41:56 #15 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 40x (6,000 KB/s)
06:41:58 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2673
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
06:41:58 #17 Text 0 File MMC.cpp, Line 17846
StartDAO : CD-Text - Off
06:41:58 #18 Text 0 File MMC.cpp, Line 22530
Set BUFE: BURN-Proof -> ON
06:41:58 #19 Text 0 File MMC.cpp, Line 18074
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 00 06 00
06:41:58 #20 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
06:41:58 #21 Text 0 File WriterStatus.cpp, Line 245
<D: PLEXTOR DVDR PX-810SA> start writing Lead-Out at LBA 149 (95h), length 0 blocks
06:42:25 #22 Phase 37 File dlgbrnst.cpp, Line 1767
Burn process completed successfully at 40x (6,000 KB/s)
06:42:25 #23 Phase 78 File dlgbrnst.cpp, Line 1767
Data verification started
06:42:28 #24 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 590400
06:42:31 #25 SPTI -1064 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1064)
CDB Data: 0x28 00 00 00 00 0E 00 00 01 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 0E 0E 00 00 00 00 21
Buffer x06d88000: Len x800
06:42:45 #26 SPTI -1128 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
CDB Data: 0x28 00 00 00 00 93 00 00 01 00 00 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
Sense Area: 0xF0 00 03 00 00 00 93 0E 00 00 00 00 11 05
Buffer x06d88000: Len x800
06:42:45 #27 SectorVerify 21 File Cdrdrv.cpp, Line 11392
Read error at sector 14
06:42:52 #28 SPTI -1128 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
CDB Data: 0x28 00 00 00 00 94 00 00 01 00 00 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
Sense Area: 0xF0 00 03 00 00 00 94 0E 00 00 00 00 11 05
Buffer x06d88000: Len x800
06:42:52 #29 SectorVerify 20 File Cdrdrv.cpp, Line 11392
Read errors from sector 147 to 148
06:42:52 #30 Phase 81 File dlgbrnst.cpp, Line 1767
Data verification failed
06:42:52 #31 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
06:42:54 #32 Text 0 File Cdrdrv.cpp, Line 11450
DriveLocker: UnLockVolume completed
06:42:54 #33 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLMSoftwareMicrosoftWindows NTCurrentVersionWinLogonAllocateCDROMs : 0 (Security Option)