Cannot Burn *.iso with TYG02 on Benq 1650!

:a Hi

BENQ 1650 with f/w BCDC
I have SolidBurn ON/ON and WOPC ON
I have tried ImgBurn, Nero CD-DVD Speed and Nero 6.6.x and they fail.

3.8Gb DVD Video

Anyone successful with *.iso and TYG02 @8x?

NBK

Everytime. :bigsmile:

Can you burn at all…? :wink:

Thanks for responding pinto2,

I cannot TYG02 at all…

NBK

Are you sure that are genuine TY?

Have you tried to burn on a different media? As asked by pinto2, can you do a burn? If even with other media you cannot do a burn, then the media is not the culprit

Thanks for responding geno888,

Yea i am sure they are genuine TY. Batch#GG000267
I bought them from www.genesysDTP.com

I just used ImgBurn to burn an *.iso with MCC 03RG20 w/o issue…

NBK

NBK

Hi all,

I guess i have a bad batch of TYG02. I will probably only buy from www.rima.com only…I have had nothing but problems.

Thanks
NBK

That’s who i get mine from :iagree:

Hi

I have actually burned some TYG02 before w/o issue…

NBK

So the discs are the issue? I don’t have any TYG02’s. I have TY02,TY03,and TYG03’s from Rima and no problems with them at all.

Hi

TYG02 DVD-R @8x burns would fail in my Lite-On LH-20A1L.

When i could burn TYG02 in my Benq 1650, they would only burn @4x only!

NBK

Looks like you have a bad batch TYG02. My TYG02 is way better than TY03 and TYG03, and close to TY02.

Thanks for responding geekrule,

I agree…Fortunately i only have about 10 TY02 left.

NBK

I still have 600+ hub printable TYG02 from rima to go. :sad:

I’m not so sure it’s the discs . . . but here’s how to find out.
Reset QSuite to all default values and “clean” the drive of “learned” SB strategies. Then deinstall QSuite.
Flash your drive w/ another earlier firmware, do a restart, then flash back to the current firmware.
After reinstalling QSuite, try burning one of your TYG02s at 8x with ALL QSuite values at default . . . that means SB is OFF for known write strategies and Overspeed is OFF . . . and see if you don’t get a decent burn.
Good luck! :slight_smile:

P.S. See http://club.cdfreaks.com/showthread.php?t=212889

Hi articulate,

I tried what you said articulate and the TYG02 would not burn at all in ImgBurn. I am using BCDC f/w.

Thanks
NBK


:a Hi

Tried a 8x TYG02 disc from the bottom and ImgBurn will only burn it at 4x which is unacceptable. I will post scans soon.

NBK

Have you tried your TYG02 on other brand burner? I mean other than Lite-on and BenQ?

Hi geekrule,

I have a computer with a NEC 3550A in it and another computer with a Lite-On LH-20A1H…

Thanks
NBK

Here are the scans

NBK




Hi

Here are some early scans of TYG02 burned @8x in my Lite-On LH-20A1H…

NBK