Ok, here’s an update. I bought a new burner, thinking that my old one was messed up. I even changed the ribbon cable just in case. The new burner is an HP Multiformat burner. I get the same problem:
I 14:00:09 ImgBurn Version 126.96.36.199 started!
I 14:00:09 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)
I 14:00:09 Total Physical Memory: 2,619,628 KB - Available: 2,225,236 KB
I 14:00:09 Initialising SPTI…
I 14:00:09 Searching for SCSI / ATAPI devices…
I 14:00:09 Found 1 DVD-ROM and 2 DVDÂ±RW/RAMs!
I 14:00:22 Operation Started!
I 14:00:22 Source File: C:\Documents and Settings\Josh\Desktop\Xbox 360 Games\Nascar 09\Nascar09.dvd
I 14:00:22 Source File Sectors: 3,825,924 (MODE1/2048)
I 14:00:22 Source File Size: 7,835,492,352 bytes
I 14:00:22 Source File Volume Identifier: XGD2DVD_NTSC
I 14:00:22 Source File Volume Set Identifier: 34672923
I 14:00:22 Source File Implementation Identifier: Sonic Scenarist 3.1
I 14:00:22 Source File File System(s): ISO9660, UDF (1.02)
I 14:00:22 Destination Device: [4:1:0] HP DVD Writer 1140i YH25 (E:) (RAID)
I 14:00:22 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x)
I 14:00:22 Destination Media Sectors: 4,173,824
I 14:00:22 Write Mode: DVD
I 14:00:22 Write Type: DAO
I 14:00:22 Write Speed: 2.4x
I 14:00:22 Link Size: Auto
I 14:00:22 Test Mode: No
I 14:00:22 OPC: No
I 14:00:22 BURN-Proof: Enabled
I 14:00:22 User Specified L0 Data Zone Capacity: 1,913,760
W 14:00:53 Failed to set L0 Data Zone Capacity!
W 14:00:53 Reason: Power On, Reset, or Bus Device Reset Occurred
I 14:00:54 Filling Buffer… (40 MB)
I 14:00:54 Writing LeadIn…
W 14:00:57 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error
W 14:00:57 Retrying (1 of 20)…
I 14:00:57 Abort Request Acknowledged
Any idea what would cause this?