Can some1 plz help me im going mad :P

vbimport

#1

:aIm trying to burn saints 2 but it just wont start burning.:@… here the log.

I 14:31:34 Initialising SPTI…
I 14:31:34 Searching for SCSI / ATAPI devices…
I 14:31:35 Found 1 DVD-ROM, 1 DVD±RW and 1 BD-ROM/HD DVD-ROM!
I 14:31:46 Operation Started!
I 14:31:46 Source File: C:\Documents and Settings\Osc\Desktop\grim.dvd
I 14:31:46 Source File Sectors: 3.825.936 (MODE1/2048)
I 14:31:46 Source File Size: 7.835.516.928 bytes
I 14:31:46 Source File Volume Identifier: XGD2DVD_NTSC
I 14:31:46 Source File Volume Set Identifier: 34672923
I 14:31:46 Source File Implementation Identifier: Sonic Scenarist 3.1
I 14:31:46 Source File File System(s): ISO9660; UDF (1.02)
I 14:31:46 Destination Device: [0:0:0] HP DVD Writer 640c QS12 (H:) (ATA)
I 14:31:46 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2,4x)
I 14:31:46 Destination Media Sectors: 3.827.520
I 14:31:46 Write Mode: DVD
I 14:31:46 Write Type: DAO
I 14:31:46 Write Speed: 4x
I 14:31:46 Link Size: Auto
I 14:31:46 Test Mode: No
I 14:31:46 OPC: No
I 14:31:46 BURN-Proof: Enabled
I 14:31:46 User Specified L0 Data Zone Capacity: 1.913.760
W 14:31:48 Failed to set L0 Data Zone Capacity!
W 14:31:48 Reason: Invalid Field in Parameter List
I 14:31:48 Filling Buffer… (40 MB)
I 14:31:48 Writing LeadIn…
W 14:31:51 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Is Full
W 14:31:51 Retrying (1 of 20)…
W 14:31:53 Retry Failed - Reason: Power Calibration Area Is Full
W 14:31:53 Retrying (2 of 20)…
W 14:31:56 Retry Failed - Reason: Power Calibration Area Is Full
W 14:31:56 Retrying (3 of 20)…
W 14:31:58 Retry Failed - Reason: Power Calibration Area Is Full
W 14:31:58 Retrying (4 of 20)…
W 14:32:00 Retry Failed - Reason: Power Calibration Area Is Full
W 14:32:00 Retrying (5 of 20)…
W 14:32:03 Retry Failed - Reason: Power Calibration Area Is Full
W 14:32:03 Retrying (6 of 20)…
W 14:32:05 Retry Failed - Reason: Power Calibration Area Is Full
W 14:32:05 Retrying (7 of 20)…
W 14:32:07 Retry Failed - Reason: Power Calibration Area Is Full
W 14:32:07 Retrying (8 of 20)…
W 14:32:10 Retry Failed - Reason: Power Calibration Area Is Full
W 14:32:10 Retrying (9 of 20)…
W 14:32:12 Retry Failed - Reason: Power Calibration Area Is Full
W 14:32:12 Retrying (10 of 20)…
W 14:32:14 Retry Failed - Reason: Power Calibration Area Is Full
W 14:32:14 Retrying (11 of 20)…
W 14:32:16 Retry Failed - Reason: Power Calibration Area Is Full
W 14:32:16 Retrying (12 of 20)…
W 14:32:18 Retry Failed - Reason: Power Calibration Area Is Full
W 14:32:18 Retrying (13 of 20)…
W 14:32:21 Retry Failed - Reason: Power Calibration Area Is Full
W 14:32:21 Retrying (14 of 20)…
W 14:32:23 Retry Failed - Reason: Power Calibration Area Is Full
W 14:32:23 Retrying (15 of 20)…
W 14:32:26 Retry Failed - Reason: Power Calibration Area Is Full
W 14:32:26 Retrying (16 of 20)…
W 14:32:28 Retry Failed - Reason: Power Calibration Area Is Full
W 14:32:28 Retrying (17 of 20)…
W 14:32:30 Retry Failed - Reason: Power Calibration Area Is Full
W 14:32:30 Retrying (18 of 20)…
W 14:32:33 Retry Failed - Reason: Power Calibration Area Is Full
W 14:32:33 Retrying (19 of 20)…
W 14:32:35 Retry Failed - Reason: Power Calibration Area Is Full
W 14:32:35 Retrying (20 of 20)…
W 14:32:37 Retry Failed - Reason: Power Calibration Area Is Full
E 14:32:40 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Is Full
I 14:32:40 Synchronising Cache…
W 14:32:44 User opted to skip the ‘Close Track/Session/Disc’ functions.
E 14:32:44 Failed to Write Image!
E 14:32:44 Operation Failed! - Duration: 00:00:58
I 14:32:44 Average Write Rate: N/A - Maximum Write Rate: N/A


#2

Your drive is getting on a bit now and I doubt the firmware supports the newer 8x MKM-003-00 media properly. Try getting the 2.4x MKM-001-00 stuff instead.


#3

search google “BenQ 1625 power calibration site:cdfreaks.com”

maybe your drive is bad :frowning: