Can only write to cds on PIONEER DVD-RW DVR-104 but not dvds

Hello all, I have a pioneer dvd -r104 firmware a227. I can write to cd’s fine but not dvd. I have tried several media types but always end up with the same results. Any one got any ideas I have enclosed my nero log file below. Sorry if its a bit long winded.
Thanks

Also i do not have the option to write to dvd’s track at once but only disc at once. I am using dvd -r media

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 09:20:56
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b

Recorder: <PIONEER DVD-RW DVR-104> Version: A227 - HA 1 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <TOSHIBA DVD-ROM SD-M1202>Version: 1020 - HA 0 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : TOSHIBA DVD-ROM SD-M1202 atapi Port 0 ID 0 DMA: Off
DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-104 atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
TOSHIBA DVD-ROM SD-M1202 D: CDRom0
PIONEER DVD-RW DVR-104 G: CDRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 383MB (392496kB)
Free physical memory: 102MB (104592kB)
Memory in use : 73 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

29.10.2005
ISO compilation
07:51:18 #1 Text 0 File Isodoc.cpp, Line 6356
Iso document burn settings

Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

07:51:18 #2 Text 0 File Reader.cpp, Line 127
Reader running

07:51:18 #3 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-104 running

07:51:18 #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

07:51:18 #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

07:51:19 #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 607 ( 0:08.07, 1MB)

07:51:19 #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

07:51:19 #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PIONEER DVD-RW DVR-104, Media type: DVD-R
Disc Manufacturer: MCC 02 - RG20
Disc Application Code: 64, Disc Physical Code: 193

07:51:19 #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<

07:51:19 #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 608 (608) = #608/0:8.8
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 608 blocks [PIONEER DVD-RW DVR-104]

07:51:22 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PIONEER DVD-RW DVR-104] for write in CUE-sheet-DAO
DAO infos:

MCN: “”
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1245184, ISRC “”
DAO layout:

Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
608 | lead-out | 1 | 0x41 | 0x00

07:51:23 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

07:51:23 #13 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

07:51:23 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

07:51:23 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 1x (1,385 KB/s)

07:51:23 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

07:51:23 #17 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode for Multisession

07:51:23 #18 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON

07:51:23 #19 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes

07:51:23 #20 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16…63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

07:51:23 #21 Text 0 File WriterStatus.cpp, Line 116
<PIONEER DVD-RW DVR-104 > start writing Lead-Out at LBA 608 (260h), lenght 0 blocks

07:51:23 #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

07:51:23 #23 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 607

07:51:35 #24 SCSI -1106 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x038B4C00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x73 0x03

07:51:35 #25 Phase 133 File dlgbrnst.cpp, Line 1832
Writing short lead-out

07:51:35 #26 SCSI -1176 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x03 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x72 0x04

07:51:35 #27 CDR -1106 File ThreadedTransferInterface.cpp, Line 1909
Power calibration error
PIONEER DVD-RW DVR-104\H1 T1

07:51:35 #28 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1909
Could not perform end of Disc-at-once

07:51:35 #29 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was -1

07:51:35 #30 CDR -201 File WriterStatus.cpp, Line 167
Invalid write state
PIONEER DVD-RW DVR-104\H1 T1

07:51:35 #31 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

07:51:36 #32 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 1x (1,385 KB/s)

Existing drivers:
File ‘Drivers\ASPI32.SYS’: Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 08:53:02
File ‘WNASPINT.DLL’: Ver=V1.18, size=57344 bytes, created 10/09/2005 01:22:49
File ‘Drivers\atapi.sys’: Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 05:00:00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

“Power Calibration Error” shows that the media is not suitable for your burner.
Try with better media!

Also this is an DVR-104 with specific Apple OEM firmware…

can i flash the firmware from apple oem firmware to one that a pc will recognise? the current version is A227.

Thanks

Crossflashing to an TRUE Pioneer DVR-104 with 1.40 (not 1.41) using DVRFlash 2.2 is what I would recommend.

Please check out http://forum.rpc1.org/dl_firmware.php?download_id=298