Burnt dvd always show as blank

vbimport

#1

hello
i have a liteon dvd ram and nero8 .i used to with this disc
Disc Type DVD+RW
Book Type DVD-ROM
Manufacturer Mitsubishi Chemical Corporation
Media ID MCC004

and now i write with disc as
Disc Type DVD+R
Book Type DVD+R
Manufacturer Moser Baer India Limited
Media ID MBIPG101R05

but now even i burn whole disc or a single session it always show blank disc after burning and doesn’t read after burning.but the same disc run on other drive.i am not able to continue multi session disc.please help somebody:a.


#2

Stop using Multisession Mode for DVDs please. It only creates issues.


#3

one thing i am adding is these disc that are not continuing multi session,shows as Disc type -DVD-RW Book type-DVD-ROM.why it is showing DVD-RW if it is DVD+R Disc.is there any solution of it ?:rolleyes:

recently i have contiued another muti-session ,here is the log
indows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.1.1.0
Internal Version: 8, 1, 1, 0
(Nero Express)
Recorder: <LITE-ON DVDRW LH-20A1P> Version: KL0P - HA 1 TA 4 - 8.1.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1791MB (1834024kB)
Free physical memory: 1145MB (1173256kB)
Memory in use : 36 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

29.10.2009
ISO compilation

Recorder: LITE-ON DVDRW LH-20A1P, Media type: DVD+R
Disc Manufacturer ID: <MCC>, Media Type ID: <004>, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
Speed measurement started
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #1344240
Pipe memory size 590400
<J: LITE-ON DVDRW LH-20A1P> start writing Lead-Out at LBA 2292512 (22FB20h), length 0 blocks
Speed measurement completed: 58.2x (80,382 KB/s):doh:
Burn process started at 16x (22,160 KB/s)

here ,can a 16x DVD complete speed measurement at 58X.
is there any problem.


#4

now both my drive are giving me a lot of headache.
i simply wanted to burm an image on a blank cd.nero give this error
Power calibration error
J: LITE-ON DVDRW LH-20A1P
AND
other in other burner as

Reset occurred
K: HL-DT-ST RW/DVD GCC-4521B

what is happening here.

then both are not recognising any dvds.see kprobe log for a 4.7 GB DVD-R
Disc Type DVD-R
Book Type DVD-R
Manufacturer
Media ID v[lX
Protection System None
Region 1,2,3,4,5,6,7,8
Capacity 31.63 GB
Free Size 0.00 GB
Free Blocks 0
Number of Layers 1
Maximum Rate 10.08 Mbps
Linear Density 0.267 um/bit
Track Density 0.74 um/track
Maximum Read Speed 0.0x
Maximum Write Speed 9.692E4x
Current Write Speed 0.0x CLV

It is showing 31.63 GB !
what is gone wrong with both drives?


#5

I’d use better media like Verbatim & TY and then try burning using the superior IMGBURN.


#6

Should that fail, replace the LiteOn. Plus, the LG drive cannot write to blank DVD media, only CD media. :wink:

And would you mind including a full burn log, as opposed to snippets? This might help us to see the full situation. :slight_smile:


#7

Yay, right. Its a combo drive, CD-R/W burner and DVD reader.


#8

i have two drive one Lite-on dvd burner and LG combo.
i tries to burn cd (image file) using nero and imgburn.In imgburn ,in both drive disk spin then stop,again spin then stop (at writing lead in).process just stuck there for long time so i stopped it.
using nero it give me error.

here the log (LITE-ON Drive)


Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.1.1.0
Internal Version: 8, 1, 1, 0
(Nero Express)
Recorder: <LITE-ON DVDRW LH-20A1P> Version: KL0P - HA 1 TA 0 - 8.1.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <HL-DT-ST RW/DVD GCC-4521B>Version: 1.05 - HA 1 TA 1 - 8.1.1.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST3500418AS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW LH-20A1P atapi Port 3 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4521B atapi Port 3 ID 1 DMA: On

=== CDRom-Device-Map ===
LITE-ON DVDRW LH-20A1P J: CdRom0
HL-DT-ST RW/DVD GCC-4521B K: CdRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1791MB (1834024kB)
Free physical memory: 1115MB (1141796kB)
Memory in use : 37 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

29.10.2009
CD Image
11:01:37 PM #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

11:01:38 PM #2 Text 0 File Burncd.cpp, Line 3212
LITE-ON DVDRW LH-20A1P
SMART-BURN activated

11:01:38 PM #3 Text 0 File Burncd.cpp, Line 3530
Turn on Disc-At-Once, using CD-R/RW media

11:01:38 PM #4 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 347615 ( 77:16.65)

11:01:38 PM #5 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

11:01:38 PM #6 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: LITE-ON DVDRW LH-20A1P;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

11:01:38 PM #7 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:01:38 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 785
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 347616 (347616) = #347616/77:14.66
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 347616 blocks [J: LITE-ON DVDRW LH-20A1P]
--------------------------------------------------------------

11:01:38 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 986
Prepare [J: LITE-ON DVDRW LH-20A1P] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 712224768, ISRC ""
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 347616 | 347616 | 0x00
347616 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

11:01:38 PM #10 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

11:01:38 PM #11 Text 0 File Burncd.cpp, Line 4316
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)

11:01:38 PM #12 Phase 24 File dlgbrnst.cpp, Line 1764
Caching of files started

11:01:38 PM #13 Text 0 File Burncd.cpp, Line 4435
Cache writing successful.

11:01:38 PM #14 Phase 25 File dlgbrnst.cpp, Line 1764
Caching of files completed

11:01:38 PM #15 Phase 28 File dlgbrnst.cpp, Line 1764
Speed measurement started

11:01:38 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2735
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

11:01:38 PM #17 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 590400

11:01:44 PM #18 Text 0 File WriterStatus.cpp, Line 113
<J: LITE-ON DVDRW LH-20A1P> start writing Lead-Out at LBA 347616 (54DE0h), length 0 blocks

11:01:44 PM #19 Phase 29 File dlgbrnst.cpp, Line 1713
Speed measurement completed: 840.7x (126,116 KB/s)

11:01:44 PM #20 Phase 36 File dlgbrnst.cpp, Line 1764
Burn process started at 48x (7,200 KB/s)

11:01:44 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2735
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

11:01:44 PM #22 Text 0 File MMC.cpp, Line 17745
StartDAO : CD-Text - Off

11:01:44 PM #23 Text 0 File MMC.cpp, Line 22430
Set BUFE: SMART-BURN -> ON , SMART-BURN : ON

11:01:44 PM #24 Text 0 File MMC.cpp, Line 17973
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 4d 10 42

11:01:44 PM #25 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 83836800

11:02:32 PM #26 SPTI -1106 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 FF FF FF 6A 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x04cf21c0: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

11:02:32 PM #27 CDR -1106 File Writer.cpp, Line 306
Power calibration error
J: LITE-ON DVDRW LH-20A1P

11:02:32 PM #28 SPTI -1169 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08

11:02:49 PM #29 Phase 38 File dlgbrnst.cpp, Line 1764
Burn process failed at 48x (7,200 KB/s)

11:02:50 PM #30 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

11:02:52 PM #31 Text 0 File Cdrdrv.cpp, Line 11276
DriveLocker: UnLockVolume completed

11:02:52 PM #32 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


In LG Combo


Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.1.1.0
Internal Version: 8, 1, 1, 0
(Nero Express)
Recorder: <HL-DT-ST RW/DVD GCC-4521B>Version: 1.05 - HA 1 TA 1 - 8.1.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <HL-DT-ST RW/DVD GCC-4521B>Version: 1.05 - HA 1 TA 1 - 8.1.1.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST3500418AS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW LH-20A1P atapi Port 3 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4521B atapi Port 3 ID 1 DMA: On

=== CDRom-Device-Map ===
LITE-ON DVDRW LH-20A1P J: CdRom0
HL-DT-ST RW/DVD GCC-4521B K: CdRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1791MB (1834024kB)
Free physical memory: 966MB (990092kB)
Memory in use : 46 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

29.10.2009
CD Image
11:34:25 PM #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

11:34:25 PM #2 Text 0 File Burncd.cpp, Line 3212
HL-DT-ST RW/DVD GCC-4521B
Buffer underrun protection activated

11:34:25 PM #3 Text 0 File Burncd.cpp, Line 3530
Turn on Disc-At-Once, using CD-R/RW media

11:34:25 PM #4 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 347615 ( 77:16.65)

11:34:25 PM #5 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

11:34:25 PM #6 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: HL-DT-ST RW/DVD GCC-4521B;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

11:34:25 PM #7 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:34:25 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 785
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 347616 (347616) = #347616/77:14.66
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 347616 blocks [K: HL-DT-ST RW/DVD GCC-4521B]
--------------------------------------------------------------

11:34:26 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 986
Prepare [K: HL-DT-ST RW/DVD GCC-4521B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 712224768, ISRC ""
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 347616 | 347616 | 0x00
347616 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

11:34:26 PM #10 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

11:34:26 PM #11 Text 0 File Burncd.cpp, Line 4316
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)

11:34:26 PM #12 Phase 24 File dlgbrnst.cpp, Line 1764
Caching of files started

11:34:26 PM #13 Text 0 File Burncd.cpp, Line 4435
Cache writing successful.

11:34:26 PM #14 Phase 25 File dlgbrnst.cpp, Line 1764
Caching of files completed

11:34:26 PM #15 Phase 36 File dlgbrnst.cpp, Line 1764
Burn process started at 32x (4,800 KB/s)

11:34:26 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2735
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

11:34:26 PM #17 Text 0 File MMC.cpp, Line 17745
StartDAO : CD-Text - Off

11:34:26 PM #18 Text 0 File MMC.cpp, Line 22430
Set BUFE: Buffer underrun protection -> ON

11:34:26 PM #19 Text 0 File MMC.cpp, Line 17973
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 4d 10 42

11:34:26 PM #20 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 83836800

11:37:26 PM #21 SPTI -1114 File SCSIPassThrough.cpp, Line 181
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1114)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 00 FF FF FF 6A 00 00 20 00 00 00
Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 29
Buffer x04cf2700: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

11:37:26 PM #22 CDR -1114 File Writer.cpp, Line 306
Reset occurred
K: HL-DT-ST RW/DVD GCC-4521B

11:37:26 PM #23 SPTI -1169 File SCSIPassThrough.cpp, Line 181
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x07
CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 07

11:37:27 PM #24 Phase 38 File dlgbrnst.cpp, Line 1764
Burn process failed at 32x (4,800 KB/s)

11:37:27 PM #25 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

11:37:57 PM #26 SPTI -600 File SCSIPassThrough.cpp, Line 181
CdRom1: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00

11:37:57 PM #27 SPTI -1114 File SCSIPassThrough.cpp, Line 181
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1114)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 29

11:37:57 PM #28 Text 0 File Cdrdrv.cpp, Line 11276
DriveLocker: UnLockVolume completed

11:37:57 PM #29 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)



#9

Try burning again, but slower, in the DVDRW.


#10

here are nest error log from imgburn

ImgBurn

I/O Error!

Device: [3:0:0] LITE-ON DVDRW LH-20A1P KL0P (J:) (ATA)

ASPI SRB Status: 0x04
Interpretation: SRB Completed With Error

Host Adapter Status: 0x00
Interpretation: Host Adapter Did Not Detect An Error

Target Status: 0x02
Interpretation: Check Condition

CDB: 2A 00 FF FF FF 6A 00 00 20 00
Interpretation: Write (10) - Sectors: -150 - -119

Sense Area: 70 00 03 00 00 00 00 0A 00 00 00 00 73 03 00 00 00 00 00 00 00 00 00 00
Interpretation: Power Calibration Area Error

AND


ImgBurn

I/O Error!

Device: [3:1:0] HL-DT-ST RW/DVD GCC-4521B 1.05 (K:) (ATA)

ASPI SRB Status: 0x04
Interpretation: SRB Completed With Error

Host Adapter Status: 0x00
Interpretation: Host Adapter Did Not Detect An Error

Target Status: 0x02
Interpretation: Check Condition

CDB: 2A 00 FF FF FF 8A 00 00 20 00
Interpretation: Write (10) - Sectors: -118 - -87

Sense Area: 70 00 05 00 00 00 00 0A 00 00 00 00 30 06 00 00 00 00 00 00 00 00 00 00
Interpretation: Cannot Format Medium - Incompatible Medium

Retry Cancel

with low burning speed


#11

And SUCCESS with SONY Disk

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.1.1.0
Internal Version: 8, 1, 1, 0
(Nero Express)
Recorder: <LITE-ON DVDRW LH-20A1P> Version: KL0P - HA 1 TA 0 - 8.1.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <HL-DT-ST RW/DVD GCC-4521B>Version: 1.05 - HA 1 TA 1 - 8.1.1.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST3500418AS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW LH-20A1P atapi Port 3 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4521B atapi Port 3 ID 1 DMA: On

=== CDRom-Device-Map ===
LITE-ON DVDRW LH-20A1P J: CdRom0
HL-DT-ST RW/DVD GCC-4521B K: CdRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1791MB (1834024kB)
Free physical memory: 965MB (988164kB)
Memory in use : 46 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

31.10.2009
CD Image
4:18:02 PM #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

4:18:02 PM #2 Text 0 File Burncd.cpp, Line 3212
LITE-ON DVDRW LH-20A1P
SMART-BURN activated

4:18:02 PM #3 Text 0 File Burncd.cpp, Line 3530
Turn on Disc-At-Once, using CD-R/RW media

4:18:03 PM #4 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 347615 ( 77:16.65)

4:18:03 PM #5 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

4:18:03 PM #6 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: LITE-ON DVDRW LH-20A1P;
CDR code: 00 97 24 16; OSJ entry from: SONY Corporation
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 18 10 (LI 97:24.16), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

4:18:03 PM #7 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:18:03 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 785
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 347616 (347616) = #347616/77:14.66
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 347616 blocks [J: LITE-ON DVDRW LH-20A1P]
--------------------------------------------------------------

4:18:03 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 986
Prepare [J: LITE-ON DVDRW LH-20A1P] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 712224768, ISRC ""
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 347616 | 347616 | 0x00
347616 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

4:18:03 PM #10 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

4:18:03 PM #11 Text 0 File Burncd.cpp, Line 4316
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)

4:18:03 PM #12 Phase 24 File dlgbrnst.cpp, Line 1764
Caching of files started

4:18:03 PM #13 Text 0 File Burncd.cpp, Line 4435
Cache writing successful.

4:18:03 PM #14 Phase 25 File dlgbrnst.cpp, Line 1764
Caching of files completed

4:18:03 PM #15 Phase 36 File dlgbrnst.cpp, Line 1764
Burn process started at 8x (1,200 KB/s)

4:18:03 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2735
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

4:18:03 PM #17 Text 0 File MMC.cpp, Line 17745
StartDAO : CD-Text - Off

4:18:03 PM #18 Text 0 File MMC.cpp, Line 22430
Set BUFE: SMART-BURN -> ON , SMART-BURN : ON

4:18:03 PM #19 Text 0 File MMC.cpp, Line 17973
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 4d 10 42

4:18:03 PM #20 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 83836800

4:28:17 PM #21 Text 0 File WriterStatus.cpp, Line 113
<J: LITE-ON DVDRW LH-20A1P> start writing Lead-Out at LBA 347616 (54DE0h), length 0 blocks

4:28:29 PM #22 Phase 37 File dlgbrnst.cpp, Line 1764
Burn process completed successfully at 8x (1,200 KB/s)

4:28:29 PM #23 Phase 78 File dlgbrnst.cpp, Line 1764
Data verification started

4:28:32 PM #24 Text 0 File ThreadedTransferInterface.cpp, Line 1057
Removed 2 run-out blocks from end of track 1. Length: 347616 -> 347614.

4:28:32 PM #25 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 590400

4:30:49 PM #26 Phase 80 File dlgbrnst.cpp, Line 1764
Data verification completed successfully

4:30:50 PM #27 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

4:30:56 PM #28 Text 0 File Cdrdrv.cpp, Line 11276
DriveLocker: UnLockVolume completed

4:30:56 PM #29 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

BUT is it only disk problem.i tried disk of moser baer ,writex ,national,etc.