Burns but doesn't

I am using the _NEC 3500ag with firmware 2.1b. I’ve been using Nero 7 and ImgBurn the past few days to try and burn DVD’s, and I’m using Maxell +RWs. Now for the problem. I set up the file to be burned and everything goes smoothly until it says the burn is done. After the burn process the DVD is still blank and I have no idea what is going on. Here is a log from ImgBurn:

I 21:16:46 ImgBurn Version 2.4.2.0 started!
I 21:16:46 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)
I 21:16:46 Total Physical Memory: 522,332 KB - Available: 120,352 KB
I 21:16:46 Initialising SPTI…
I 21:16:46 Searching for SCSI / ATAPI devices…
I 21:16:46 Found 3 DVD-ROMs and 1 DVD±RW!
I 21:18:07 Operation Started!
I 21:18:07 Device: [1:1:0] _NEC DVD_RW ND-3500AG 2.1B (E:) (ATA)
I 21:18:07 Media Type: DVD+RW (Disc ID: RITEK-004-48) (Speeds: 2.4x, 4x)
I 21:18:07 Quick Erase: No
I 21:18:07 Erasing Disc…
I 21:32:36 Operation Successfully Completed! - Duration: 00:14:28
I 21:32:53 Operation Started!
I 21:32:53 Source File: C:\Documents and Settings\Sean\My Documents\Bleach_s1_d1.iso
I 21:32:53 Source File Sectors: 2,235,488 (MODE1/2048)
I 21:32:53 Source File Size: 4,578,279,424 bytes
I 21:32:53 Source File Volume Identifier: New Folder
I 21:32:53 Source File Volume Set Identifier: 3A2EA03B00221C46
I 21:32:53 Source File Application Identifier: IMGBURN V2.4.2.0 - THE ULTIMATE IMAGE BURNER!
I 21:32:53 Source File Implementation Identifier: ImgBurn
I 21:32:53 Source File File System(s): ISO9660, UDF (1.02)
I 21:32:53 Destination Device: [1:1:0] _NEC DVD_RW ND-3500AG 2.1B (E:) (ATA)
I 21:32:53 Destination Media Type: DVD+RW (Disc ID: RITEK-004-48) (Speeds: 2.4x, 4x)
I 21:32:53 Destination Media Sectors: 2,295,104
I 21:32:53 Write Mode: DVD
I 21:32:53 Write Type: DAO
I 21:32:53 Write Speed: 4x
I 21:32:53 Link Size: Auto
I 21:32:53 Test Mode: No
I 21:32:53 OPC: No
I 21:32:53 BURN-Proof: Enabled
I 21:32:53 Book Type Setting: DVD-ROM
I 21:32:53 Filling Buffer… (20 MB)
I 21:32:54 Writing LeadIn…
I 21:32:54 Writing Session 1 of 1… (1 Track, LBA: 0 - 2235487)
I 21:32:54 Writing Track 1 of 1… (MODE1/2048, LBA: 0 - 2235487)
I 21:46:17 Synchronising Cache…
I 21:46:19 Closing Session…
I 21:46:20 Exporting Graph Data…
I 21:46:20 Graph Data File: C:\Documents and Settings\Sean\Application Data\ImgBurn\Graph Data Files_NEC_DVD_RW_ND-3500AG_2.1B_WEDNESDAY-JANUARY-14-2009_9-32_PM_RITEK-004-48_4x.ibg
I 21:46:20 Export Successfully Completed!
I 21:46:20 Operation Successfully Completed! - Duration: 00:13:26
I 21:46:20 Average Write Rate: 5,567 KB/s (4.0x) - Maximum Write Rate: 6,246 KB/s (4.5x)
I 21:46:20 Cycling Tray before Verify…
I 21:46:38 Device Ready!
I 21:46:38 Operation Started!
I 21:46:38 Source Device: [1:1:0] _NEC DVD_RW ND-3500AG 2.1B (E:) (ATA)
I 21:46:38 Source Media Type: DVD+RW (Book Type: DVD+RW) (Disc ID: RITEK-004-48) (Speeds: 2.4x, 4x)
I 21:46:38 Image File: C:\Documents and Settings\Sean\My Documents\Bleach_s1_d1.iso
I 21:46:38 Image File Sectors: 2,235,488 (MODE1/2048)
I 21:46:38 Image File Size: 4,578,279,424 bytes
I 21:46:38 Image File Volume Identifier: New Folder
I 21:46:38 Image File Volume Set Identifier: 3A2EA03B00221C46
I 21:46:38 Image File Application Identifier: IMGBURN V2.4.2.0 - THE ULTIMATE IMAGE BURNER!
I 21:46:38 Image File Implementation Identifier: ImgBurn
I 21:46:38 Image File File System(s): ISO9660, UDF (1.02)
I 21:46:38 Read Speed (Data/Audio): MAX / MAX
E 21:46:38 Session 1, Track 1 is smaller on the disc than it is in the image file.
E 21:46:38 Disc’s Track Sectors: 0 (TOC Sectors: 0)
E 21:46:38 Image File’s Track Sectors: 2235488 (TOC Sectors: 2235488)
E 21:46:38 Operation Failed! - Duration: 00:00:00
I 21:46:38 Average Verify Rate: N/A - Maximum Verify Rate: N/A

I only get an error after the burn process says success. I’m so confused and am ready to break the DVD burner.

Try with a DVD+R.

I will attempt it when I get out and get more discs.