Burning probs

Daijiro 2008-06-23 19:42:13 UTC #1

lately i have been having problems burning xbox 360 games. At first i figured my drive died on me since i have never had problems burning before so i decied to replace my pioneer 112d for a pioneer 115d. i use verbatim and have used clone cd and img burn and they both failed. At about 36 percent on clone cd the buffers would just slow down and after a while i would get a fail to burn error. On imgburn the same happens but keeps going to about 51 percent then i get an error. The games were DBZ burst limit and GRID. plz some one help with some steps on how to fix these problems...lol im already mad i bought another burner for no reason...and yes i upgraded the firmware. wasted about 10 verbatim discs on both games trying to figure out whats wrong.

Daijiro 2008-06-24 00:22:16 UTC #2

well i finally got grid to burn but it took like 1 hr and 35 min…as usual it started to slow down around the layer break and i thought i was gonna get an error but it kept going…just very slowly. here is my log on clone CD

I 1:24:02 AM CloneCD Version 5.3.1.0 started!
I 1:24:02 AM ElbyCDIO Driver 6.0.1.0
I 1:24:02 AM ElbyCDIO.dll 6.0.6.5
I 1:24:02 AM CCDDriver.dll 5.3.0.0
I 1:24:02 AM ElbyECC.dll 4.0.0.0
I 1:24:02 AM WriteDVD.dll 2.6.3.1
I 1:24:02 AM Registered to:
I 1:24:28 AM Searching for SCSI/ATAPI devices…
I 1:24:29 AM Device Scan found 1 CD-ROMs and 1 CD-Writers!
I 1:25:34 AM Starting copy from F:\XBOX360\alt.binaries.games.xbox360\Grid USA Xbox360 Vortex[nzbmatrix.com]\vortex-rdg.dvd to PIONEER DVD-RW DVR-115D
I 1:25:34 AM Write Speed: 4x
I 1:25:34 AM Writing Session 1 LeadIn…
I 1:26:13 AM Writing Session 1 image file…
I 3:00:07 AM Writing Session 1 LeadOut…
I 3:01:10 AM Duration of operation: 01:35:35
I 3:01:10 AM Average Speed: 1334 kBytes/s (0.99)

bjkg 2008-06-24 06:57:19 UTC #3

@ Daijiro

I doubt that any Forum Member is going to assist you with copying an XBox 360 game that you have downloaded from the InterNet.

Perhaps you should review the Forum Rules ->

http://club.cdfreaks.com/f87/announcement-rules-forum-some-tips-guidelines.html

Regards,
bjkg

marcus_667 2008-06-24 07:04:04 UTC #4

[QUOTE=Daijiro;2082766]well i finally got grid to burn but it took like 1 hr and 35 min…as usual it started to slow down around the layer break and i thought i was gonna get an error but it kept going…just very slowly. here is my log on clone CD

I 1:24:02 AM CloneCD Version 5.3.1.0 started!
I 1:24:02 AM ElbyCDIO Driver 6.0.1.0
I 1:24:02 AM ElbyCDIO.dll 6.0.6.5
I 1:24:02 AM CCDDriver.dll 5.3.0.0
I 1:24:02 AM ElbyECC.dll 4.0.0.0
I 1:24:02 AM WriteDVD.dll 2.6.3.1
I 1:24:02 AM Registered to:
I 1:24:28 AM Searching for SCSI/ATAPI devices…
I 1:24:29 AM Device Scan found 1 CD-ROMs and 1 CD-Writers!
I 1:25:34 AM Starting copy from [B]F:\XBOX360\alt.binaries.games.xbox360\Grid USA Xbox360 Vortex[nzbmatrix.com]\vortex-rdg.dvd[/B] to PIONEER DVD-RW DVR-115D
I 1:25:34 AM Write Speed: 4x
I 1:25:34 AM Writing Session 1 LeadIn…
I 1:26:13 AM Writing Session 1 image file…
I 3:00:07 AM Writing Session 1 LeadOut…
I 3:01:10 AM Duration of operation: 01:35:35
I 3:01:10 AM Average Speed: 1334 kBytes/s (0.99)[/QUOTE]

Unlucky i know what the problem probably is but i aint telling you since uve obtained it illegally and its not a legit backup , imo if u dont know why ure burners going slow u wouldnt know how to rip originals anyways dont waste our time for your illegal gains

imkidd57 2008-06-24 15:35:16 UTC #5

[B]@Daijiro:[/B] Please don’t ask about illegal distributions of games. Read this reminder of the rules:

http://club.cdfreaks.com/f80/dont-ask-help-warez-downloads-here-131673/

Thread closed.