Burning problems

vbimport

#1

Well iv been on this site for a while trying to research my problem and after countless days of trying to fix it the problem still no luck. Basically out the blue my burner kept failing to burn. Iv tried most everything i read update drivers and software “Nero”, use different media, delete and reinstall software, ect ect.

I was using Nero 6 deleted and install 7 now, drive is a Optiarc DVD RW AD-7170A, using memorex media if that helps. This is a copy of my last attempt to burn with no luck. Any help would be much appreciated i just want this dam thing to work again.

1C80-0000-19E5-MA2X-4004-1287-****

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.7.5.1
Internal Version: 7, 7, 5, 1

Recorder: <Optiarc DVD RW AD-7170A> Version: 1.02 - HA 1 TA 0 - 7.7.5.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <Optiarc DVD RW AD-7170A >Version: 1.02 - HA 1 TA 0 - 7.7.5.1
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080P0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1200JB-32FUA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : Optiarc DVD RW AD-7170A atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
Optiarc DVD RW AD-7170A D: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048052kB)
Free physical memory: 335MB (343296kB)
Memory in use : 67 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.2.2007
ISO compilation
2:12:31 AM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

2:12:32 AM #2 Text 0 File Isodoc.cpp, Line 6527
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

2:12:32 AM #3 ISO9660GEN -11 File Geniso.cpp, Line 3334
First writeable address = 0 (0x00000000)

2:12:32 AM #4 Text 0 File Burncd.cpp, Line 3465
Turn on Disc-At-Once, using DVD media

2:12:32 AM #5 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 524479 (116:33.04, 1024MB)

2:12:32 AM #6 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)

2:12:32 AM #7 Text 0 File DlgWaitCD.cpp, Line 2912
Recorder: Optiarc DVD RW AD-7170A, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193

2:12:32 AM #8 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================

2:12:32 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 823
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 524480 (524480) = #524480/116:33.5
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 524480 blocks [D: Optiarc DVD RW AD-7170A]
--------------------------------------------------------------

2:12:32 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1026
Prepare [D: Optiarc DVD RW AD-7170A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1074135040, ISRC “”
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 524480 | 0 | 0x00
0 | 1 | 1 | 0x41 | 524480 | 0 | 0x00
524480 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

2:12:32 AM #11 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

2:12:32 AM #12 Phase 24 File dlgbrnst.cpp, Line 1760
Caching of files started

2:12:32 AM #13 Text 0 File Burncd.cpp, Line 4298
Cache writing successful.

2:12:32 AM #14 Phase 25 File dlgbrnst.cpp, Line 1760
Caching of files completed

2:12:32 AM #15 Phase 28 File dlgbrnst.cpp, Line 1760
Speed measurement started

2:12:32 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2764
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

2:13:55 AM #17 Text 0 File WriterStatus.cpp, Line 113
<D: Optiarc DVD RW AD-7170A> start writing Lead-Out at LBA 524480 (800C0h), length 0 blocks

2:13:55 AM #18 Phase 29 File dlgbrnst.cpp, Line 1709
Speed measurement completed: 9.1x (12,658 KB/s)

2:13:55 AM #19 Phase 36 File dlgbrnst.cpp, Line 1760
Burn process started at 6x (8,310 KB/s)

2:13:55 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2764
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

2:13:55 AM #21 Text 0 File DVDR.cpp, Line 3070
Recording mode: Sequential Recording Mode

2:13:55 AM #22 Text 0 File DVDR.cpp, Line 3226
Start write address at LBA 0
DVD high compatibility mode: Yes

2:13:55 AM #23 Text 0 File Cdrdrv.cpp, Line 9288
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16…63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`…0@P…!..
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

2:13:56 AM #24 Text 0 File Cdrdrv.cpp, Line 1303
02:13:56.218 - D: Optiarc DVD RW AD-7170A : Queue again later

2:14:26 AM #25 SPTI -1106 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x08a70040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

2:14:26 AM #26 CDR -1106 File Writer.cpp, Line 301
Power calibration error
D: Optiarc DVD RW AD-7170A

2:14:26 AM #27 Text 0 File DVDR.cpp, Line 3446
EndDAO: Last written address was -1

2:14:26 AM #28 Phase 38 File dlgbrnst.cpp, Line 1760
Burn process failed at 6x (8,310 KB/s)

2:14:26 AM #29 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

2:14:30 AM #30 Text 0 File Cdrdrv.cpp, Line 10529
DriveLocker: UnLockVolume completed

2:14:30 AM #31 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


#2

you need to edit your post and remove your nero key


#3

Try some different discs. Memorex are usually not that good in my experience.


#4

Why the slow burn speed?

16x media should be burned much faster than 6x, try upping the speed to 12x.

Apart from that Memorex :Z


#5

That media worked fine it just happened out of the blue. I did install a usb 2.0 card in my comp and i did read somewhere that might be the problem. I just dont remember if the problem started before or after.

Samlar- The edit tab is gone not sure where it went but nero i have is a trail version so no worries but yes i would like to delete if possiable.

Timc_ I tried to burn at every speed just to see if it would burn no luck. I tried this morning at 12x and this is my new log. Im really starting to get pissed at this iv put in so many hours trying to figure it out but im not about to give up.

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.7.5.1
Internal Version: 7, 7, 5, 1

Recorder: <Optiarc DVD RW AD-7170A> Version: 1.02 - HA 1 TA 0 - 7.7.5.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <Optiarc DVD RW AD-7170A >Version: 1.02 - HA 1 TA 0 - 7.7.5.1
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080P0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1200JB-32FUA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : Optiarc DVD RW AD-7170A atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
Optiarc DVD RW AD-7170A D: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048052kB)
Free physical memory: 465MB (476428kB)
Memory in use : 54 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.2.2007
ISO compilation
11:23:44 AM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

11:23:44 AM #2 Text 0 File Isodoc.cpp, Line 6527
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

11:23:44 AM #3 ISO9660GEN -11 File Geniso.cpp, Line 3334
First writeable address = 0 (0x00000000)

11:23:44 AM #4 Text 0 File Burncd.cpp, Line 3465
Turn on Disc-At-Once, using DVD media

11:23:45 AM #5 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 524479 (116:33.04, 1024MB)

11:23:45 AM #6 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)

11:23:45 AM #7 Text 0 File DlgWaitCD.cpp, Line 2912
Recorder: Optiarc DVD RW AD-7170A, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193

11:23:45 AM #8 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:23:45 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 823
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 524480 (524480) = #524480/116:33.5
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 524480 blocks [D: Optiarc DVD RW AD-7170A]
--------------------------------------------------------------

11:23:45 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1026
Prepare [D: Optiarc DVD RW AD-7170A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1074135040, ISRC ""
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 524480 | 0 | 0x00
0 | 1 | 1 | 0x41 | 524480 | 0 | 0x00
524480 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

11:23:45 AM #11 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

11:23:45 AM #12 Phase 24 File dlgbrnst.cpp, Line 1760
Caching of files started

11:23:45 AM #13 Text 0 File Burncd.cpp, Line 4298
Cache writing successful.

11:23:45 AM #14 Phase 25 File dlgbrnst.cpp, Line 1760
Caching of files completed

11:23:45 AM #15 Phase 28 File dlgbrnst.cpp, Line 1760
Speed measurement started

11:23:45 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2764
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:25:13 AM #17 Text 0 File WriterStatus.cpp, Line 113
<D: Optiarc DVD RW AD-7170A> start writing Lead-Out at LBA 524480 (800C0h), length 0 blocks

11:25:13 AM #18 Phase 29 File dlgbrnst.cpp, Line 1709
Speed measurement completed: 8.5x (11,836 KB/s)

11:25:13 AM #19 Text 0 File Burncd.cpp, Line 4372
Can only write at 8x instead of 12x,

because speed of source data is too slow

11:25:13 AM #20 Phase 36 File dlgbrnst.cpp, Line 1760
Burn process started at 8x (11,080 KB/s)

11:25:14 AM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2764
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:25:14 AM #22 Text 0 File DVDR.cpp, Line 3070
Recording mode: Sequential Recording Mode

11:25:14 AM #23 Text 0 File DVDR.cpp, Line 3226
Start write address at LBA 0
DVD high compatibility mode: Yes

11:25:14 AM #24 Text 0 File Cdrdrv.cpp, Line 9288
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16…63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`…0@P…!..
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

11:25:16 AM #25 Text 0 File Cdrdrv.cpp, Line 1303
11:25:16.015 - D: Optiarc DVD RW AD-7170A : Queue again later

11:25:43 AM #26 SPTI -1106 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x22040040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

11:25:43 AM #27 CDR -1106 File Writer.cpp, Line 301
Power calibration error
D: Optiarc DVD RW AD-7170A

11:25:43 AM #28 Text 0 File DVDR.cpp, Line 3446
EndDAO: Last written address was -1

11:25:44 AM #29 Phase 38 File dlgbrnst.cpp, Line 1760
Burn process failed at 8x (11,080 KB/s)

11:25:44 AM #30 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

11:25:48 AM #31 Text 0 File Cdrdrv.cpp, Line 10529
DriveLocker: UnLockVolume completed

11:25:48 AM #32 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


#6

11:25:13 AM #19 Text 0 File Burncd.cpp, Line 4372
Can only write at 8x instead of 12x,

because speed of source data is too slow

As you seem to be burning from your HDD I’m rather surprised to see this message.

I’d switch off that speed test as I doubt it serves any real use.

It’s obviously possible that there’s a fault with the drive but until you use quality media rather than sub-standard media like Memorex with the Ritek F1 dye it’s hard to say.