Burning Problem with Nero (see log)

vbimport

#1

I’m using a NEC 3500 and get a LOT of this error (No seek complete)… rarely a DVD burn 100% ;(

I think that is a VIA chipset problem… someone experience this?

I have a Asus A7V8X under Windows XP SP2

Nero is uptodate… Firmware too and all drivers too :frowning:

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.71 (0002), size=45056 bytes, created 17/7/2002 08:20:56
ahead WinASPI: File ‘C:\Programas\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:34
Nero Version: 6.6.0.8
Recorder: <_NEC DVD_RW ND-3500AG> Version: 2.19 - HA 2 TA 1 - 6.6.0.8
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-ROM GDR8161B>Version: 0102 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <d347prt> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Promise 2+0 Stripe/RAID01.10 fasttx2k Port 0 ID 0 DMA: Off
OtherPeripheral : Promise RAID Console 1.00 fasttx2k Port 0 ID 4 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 1 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST CD-RW GCE-8520B G: CDRom1
HL-DT-ST DVD-ROM GDR8161 H: CDRom2
Generic DVD-ROM L: CDRom3
_NEC DVD_RW ND-3500AG F: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (83886080) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048084kB)
Free physical memory: 449MB (459820kB)
Memory in use : 56 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

27.3.2005
Burn DVD Image
03:55:18 #1 Text 0 File Reader.cpp, Line 127
Reader running

03:55:18 #2 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-3500AG running

03:55:18 #3 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

03:55:18 #4 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 714559 (158:47.34, 1395MB)
Last address to be written: 713029 (158:27.04, 1392MB)

03:55:18 #5 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)

03:55:18 #6 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: _NEC DVD_RW ND-3500AG, Media type: DVD-R
Disc Manufacturer: AML -
Disc Application Code: 64, Disc Physical Code: 225

03:55:18 #7 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================

03:55:18 #8 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1)
2 indices, index0 (150) not provided
original disc pos #0 + 713030 (713030) = #713030/158:27.5
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 713030 blocks [_NEC DVD_RW ND-3500AG]
--------------------------------------------------------------

03:55:18 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [NEC DVD_RW ND-3500AG] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1460285440, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep
____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
713030 | lead-out | 1 | 0x41 | 0x00

03:55:18 #10 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

03:55:18 #11 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

03:55:18 #12 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

03:55:18 #13 Phase 28 File dlgbrnst.cpp, Line 1832
Speed measurement started

03:55:18 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

03:55:41 #15 Text 0 File WriterStatus.cpp, Line 116
<_NEC DVD_RW ND-3500AG> start writing Lead-Out at LBA 713030 (AE146h), lenght 0 blocks

03:55:41 #16 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

03:55:41 #17 Phase 29 File dlgbrnst.cpp, Line 1781
Speed measurement completed: 46.9x (64.820 KB/s)

03:55:41 #18 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2.770 KB/s)

03:55:41 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

03:55:41 #20 Text 0 File DVDR.cpp, Line 2194
Recording mode: Sequential Recording Mode

03:55:41 #21 Text 0 File Mmc.cpp, Line 21235
Set BUFE: Buffer underrun protection -> ON

03:55:41 #22 Text 0 File DVDR.cpp, Line 2340
Start write address at LBA 0
DVD high compatibility mode: Yes

03:55:41 #23 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 80 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: DE73F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16…63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

03:55:41 #24 Text 0 File DVDR.cpp, Line 5937
Book Type counter: 500, Book Type selected in EEPROM, command version 2

03:55:41 #25 Text 0 File DVDR.cpp, Line 5937
Book Type counter: 500, Book Type selected in EEPROM, command version 2

03:55:41 #26 Text 0 File DVDR.cpp, Line 5937
Book Type counter: 500, Book Type selected in EEPROM, command version 2

03:55:41 #27 Text 0 File DVDR.cpp, Line 5061
Drive: _NEC DVD_RW ND-3500AG
Book Type request [NEC]: DVD-ROM
Book Type setting not supported for the loaded disc type
Changing the Book Type was finished with error, return code -4

03:55:42 #28 Text 0 File Cdrdrv.cpp, Line 1287
03:55:42.765 - _NEC DVD_RW ND-3500AG\H2 T1 : Queue again later

04:00:30 #29 SCSI -1093 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x04590000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x04 0xAC 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x02 0x00

04:00:30 #30 CDR -1093 File Writer.cpp, Line 311
No seek complete

04:00:30 #31 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

04:00:30 #32 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

04:00:30 #33 Text 0 File DVDR.cpp, Line 2603
EndDAO: Last written address was 306175

04:00:30 #34 Text 0 File DVDR.cpp, Line 5937
Book Type counter: 500, Book Type selected in EEPROM, command version 2

04:00:30 #35 Text 0 File DVDR.cpp, Line 5937
Book Type counter: 500, Book Type selected in EEPROM, command version 2

04:00:30 #36 Text 0 File DVDR.cpp, Line 5061
Drive: _NEC DVD_RW ND-3500AG
Book Type request [NEC]: DVD-ROM
Book Type setting not supported for the loaded disc type
Changing the Book Type was finished with error, return code -4

04:00:30 #37 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2x (2.770 KB/s)

Existing drivers:
File ‘Drivers\ASPI32.SYS’: Ver=4.71 (0002), size=16877 bytes, created 17/7/2002 07:53:02
File ‘Drivers\PXHELP20.SYS’: Ver=2.02.62a, size=20016 bytes, created 28/10/2003 07:02:00 (Prassi/Veritas driver for win 2K)
File ‘Drivers\d347prt.sys’: Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 22/8/2004 16:31:48 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


#2

@ LightShade
I think your problem lies in very poor quality media

03:55:18 #4 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 714559 (158:47.34, 1395MB)
Last address to be written: 713029 (158:27.04, 1392MB)

03:55:18 #5 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)

03:55:18 #6 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: _NEC DVD_RW ND-3500AG, Media type: DVD-R
Disc Manufacturer: AML -
Disc Application Code: 64, Disc Physical Code: 225
Your NEC can’t even read the disc properly. I think you need to use better media to rule out ‘poor media’ as a problem source


#3

Is not a quality of media… or… may be ^^

but this disc was work on several writers with no problems!!

And… i see the buffer reachs to ZERO before this error =/

My UDMA is 2 T-T