Burning issue out of the blue!?

Hi,i have been using nero for a long time and have never had a problem then all of a sudden i am having problems.I use make a movie to burn movies etc. as i can get a couple of films (at least) on a 4.7.I setup a project like usual and everything was fine,it analyzed it fine but when it came to the actual burn it just ejected and said that the project had failed.I have a copy of the log below if its of any help.I have just updated to Nero 7 but i get the feeling this isnt the problem as i think it may have happened the last time i used Nero 6 but im not sure about that also (and this might be related to Nero 7) it tends to show 4gb full even though ive only added a 800mb film to the project???Sorry if all this is a bit vague but im no expert on these things!
This is what i assumed to be the important bit.
[16:47:57] NeroVision === CDRom-Device-Map ===
[16:47:57] NeroVision PHILIPS PBDV1660P1 D: CDRom0
[16:47:57] NeroVision GS9138O AUE043Q E: CDRom1
[16:47:57] NeroVision =======================
[16:47:57] NeroVision AutoRun : 1
[16:47:57] NeroVision Excluded drive IDs:
[16:47:57] NeroVision WriteBufferSize: 74448896 (0) Byte
[16:47:57] NeroVision BUFE : 0
[16:47:57] NeroVision Physical memory : 510MB (522240kB)
[16:47:57] NeroVision Free physical memory: 36MB (37420kB)
[16:47:57] NeroVision Memory in use : 92 %
[16:47:57] NeroVision Uncached PFiles: 0x0
[16:47:57] NeroVision Use Inquiry : 1
[16:47:57] NeroVision Global Bus Type: default (0)
[16:47:57] NeroVision Check supported media : Disabled (0)
[16:47:57] NeroVision 29.11.2006
[16:47:57] NeroVision NeroAPI
[16:47:57] NeroVision 16:44:23 #1 Phase 111 File APIProgress.cpp, Line 282
[16:47:57] NeroVision DVD-Video files sorted
[16:47:57] NeroVision
[16:47:57] NeroVision 16:44:26 #2 Text 0 File ThreadedTransfer.cpp, Line 540
[16:47:57] NeroVision ReadBuffer-Pipe got 262144KB of Memory
[16:47:57] NeroVision
[16:47:57] NeroVision 16:44:26 #3 Text 0 File Reader.cpp, Line 126
[16:47:57] NeroVision Reader running
[16:47:57] NeroVision
[16:47:57] NeroVision 16:44:26 #4 Text 0 File Writer.cpp, Line 123
[16:47:57] NeroVision Writer D: PHILIPS PBDV1660P1 running
[16:47:57] NeroVision
[16:47:57] NeroVision 16:44:26 #5 ISO9660GEN -11 File Geniso.cpp, Line 3313
[16:47:57] NeroVision First writeable address = 0 (0x00000000)
[16:47:57] NeroVision
[16:47:57] NeroVision 16:44:26 #6 ISO9660GEN -11 File Geniso.cpp, Line 3313
[16:47:57] NeroVision First writeable address = 0 (0x00000000)
[16:47:57] NeroVision
[16:47:57] NeroVision 16:44:27 #7 Text 0 File Burncd.cpp, Line 3443
[16:47:57] NeroVision Turn on Disc-At-Once, using DVD media
[16:47:57] NeroVision
[16:47:57] NeroVision 16:44:27 #8 Text 0 File DlgWaitCD.cpp, Line 300
[16:47:57] NeroVision Last possible write address on media: 2295103 (510:01.28, 4482MB)
[16:47:57] NeroVision Last address to be written: 1902511 (422:46.61, 3715MB)
[16:47:57] NeroVision
[16:47:57] NeroVision 16:44:27 #9 Text 0 File DlgWaitCD.cpp, Line 312
[16:47:57] NeroVision Write in overburning mode: NO (enabled: CD)
[16:47:57] NeroVision
[16:47:57] NeroVision 16:44:27 #10 Text 0 File DlgWaitCD.cpp, Line 2851
[16:47:57] NeroVision Recorder: PHILIPS PBDV1660P1, Media type: DVD+R
[16:47:57] NeroVision
[16:47:57] NeroVision 16:44:27 #11 Text 0 File DlgWaitCD.cpp, Line 484
[16:47:57] NeroVision >>> Protocol of DlgWaitCD activities: <<<
[16:47:57] NeroVision =========================================
[16:47:57] NeroVision
[16:47:57] NeroVision 16:44:27 #12 Text 0 File ThreadedTransferInterface.cpp, Line 863
[16:47:57] NeroVision Setup items (after recorder preparation)
[16:47:57] NeroVision 0: TRM_DATA_MODE1 ()
[16:47:57] NeroVision 2 indices, index0 (150) not provided
[16:47:57] NeroVision original disc pos #0 + 1902512 (1902512) = #1902512/422:46.62
[16:47:57] NeroVision relocatable, disc pos for caching/writing not required/ required, no patch infos
[16:47:57] NeroVision -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1902512 blocks [D: PHILIPS PBDV1660P1]
[16:47:57] NeroVision --------------------------------------------------------------
[16:47:57] NeroVision
[16:47:57] NeroVision 16:44:28 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1079
[16:47:57] NeroVision Prepare recorder [D: PHILIPS PBDV1660P1] for write in CUE-sheet-DAO
[16:47:57] NeroVision DAO infos:
[16:47:57] NeroVision ==========
[16:47:57] NeroVision MCN: “”
[16:47:57] NeroVision TOCType: 0x00; Session Closed, disc fixated
[16:47:57] NeroVision Tracks 1 to 1: Idx 0 Idx 1 Next Trk
[16:47:57] NeroVision 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3896344576, ISRC “”
[16:47:57] NeroVision DAO layout:
[16:47:57] NeroVision ===========
[16:47:57] NeroVision __Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
[16:47:57] NeroVision 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
[16:47:57] NeroVision 0 | 1 | 0 | 0x41 | 1902512 | 0 | 0x00
[16:47:57] NeroVision 0 | 1 | 1 | 0x41 | 1902512 | 0 | 0x00
[16:47:57] NeroVision 1902512 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
[16:47:57] NeroVision
[16:47:57] NeroVision 16:44:28 #14 Text 0 File SCSIPassThrough.cpp, Line 39
[16:47:57] NeroVision SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
[16:47:57] NeroVision
[16:47:57] NeroVision 16:44:28 #15 Phase 24 File APIProgress.cpp, Line 282
[16:47:57] NeroVision Caching of files started
[16:47:57] NeroVision
[16:47:57] NeroVision 16:44:28 #16 Text 0 File Burncd.cpp, Line 4274
[16:47:57] NeroVision Cache writing successful.
[16:47:57] NeroVision
[16:47:57] NeroVision 16:44:28 #17 Phase 25 File APIProgress.cpp, Line 282
[16:47:57] NeroVision Caching of files completed
[16:47:57] NeroVision
[16:47:57] NeroVision 16:44:28 #18 Phase 36 File APIProgress.cpp, Line 282
[16:47:57] NeroVision Burn process started at 8x (11,080 KB/s)
[16:47:57] NeroVision
[16:47:57] NeroVision 16:44:28 #19 Phase 183 File APIProgress.cpp, Line 282
[16:47:57] NeroVision SolidBurn activated
[16:47:57] NeroVision
[16:47:57] NeroVision 16:44:28 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2746
[16:47:57] NeroVision Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
[16:47:57] NeroVision
[16:47:57] NeroVision 16:44:28 #21 SPTI -1066 File SCSIPassThrough.cpp, Line 291
[16:47:57] NeroVision D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
[16:47:57] NeroVision Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
[16:47:57] NeroVision Sense Code: 0x24
[16:47:57] NeroVision Sense Qual: 0x00
[16:47:57] NeroVision CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
[16:47:57] NeroVision Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
[16:47:57] NeroVision Buffer x075a6200: Len x804
[16:47:57] NeroVision
[16:47:57] NeroVision 16:44:28 #22 Text 0 File DVDPlusRW.cpp, Line 662
[16:47:57] NeroVision Start write address at LBA 0
[16:47:57] NeroVision DVD high compatibility mode: Yes
[16:47:57] NeroVision
[16:47:57] NeroVision 16:45:15 #23 SPTI -1176 File SCSIPassThrough.cpp, Line 291
[16:47:57] NeroVision D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
[16:47:57] NeroVision Sense Key: 0x03 (KEY_MEDIUM_ERROR)
[16:47:57] NeroVision Sense Code: 0x72
[16:47:57] NeroVision Sense Qual: 0x01
[16:47:57] NeroVision CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
[16:47:57] NeroVision Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 72 01
[16:47:57] NeroVision Buffer x024b0000: Len x10000
[16:47:57] NeroVision 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[16:47:57] NeroVision 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[16:47:57] NeroVision 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[16:47:57] NeroVision
[16:47:57] NeroVision 16:45:16 #24 CDR -1176 File Writer.cpp, Line 312
[16:47:57] NeroVision Session fixation error
[16:47:57] NeroVision D: PHILIPS PBDV1660P1
[16:47:57] NeroVision
[16:47:57] NeroVision 16:45:17 #25 Text 0 File ThreadedTransfer.cpp, Line 229
[16:47:57] NeroVision all writers idle, stopping conversion
[16:47:57] NeroVision
[16:47:57] NeroVision 16:45:19 #26 Text 0 File ThreadedTransfer.cpp, Line 223
[16:47:57] NeroVision conversion idle, stopping reader
[16:47:57] NeroVision
[16:47:57] NeroVision 16:45:20 #27 Phase 127 File APIProgress.cpp, Line 282
[16:47:57] NeroVision Generating DVD high compatibility borders
[16:47:57] NeroVision
[16:47:57] NeroVision 16:45:21 #28 Phase 129 File APIProgress.cpp, Line 282
[16:47:57] NeroVision Generating DVD borders completed successfully
[16:47:57] NeroVision
[16:47:57] NeroVision 16:45:22 #29 Phase 38 File APIProgress.cpp, Line 282
[16:47:57] NeroVision Burn process failed at 8x (11,080 KB/s)
[16:47:57] NeroVision
[16:47:57] NeroVision Existing drivers:
[16:47:57] NeroVision File ‘Drivers\ASPI32.SYS’: Ver=4.60 (1021), size=25244 bytes, created 01/07/2006 16:34:41
[16:47:57] NeroVision Registry Keys:
[16:47:57] NeroVision HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Hi & Welcome.

What is the media you’re burning to? Nero’s CD-DVD Speed (toolkit) using the disc info tab will show the media ID.

When you add files ti a NeroVision project it will attempt to encode them. This is necessary if it’s something like an avi file but not necessary with an mpeg file. If adding mpeg files there’s a check box somewhere for , I think , smart encoding or something similar. That’ll stop unnecessary re-encoding.

Hi,yeah like i said ive worked with all these file types with no problem plus since posting the thread ive tried burning avi files as well with the same results.Also i can get past the encoding it just dosnt do the physical act of burning.Im using the same dvd+r media that i always have done.Does anyone understand the log as im assuming it records the errors i just dont understand all that !I appreciate any help that can be offered and feel fortunate to have stumbled across such a place in my hour of need!!!

We still need to know exactly the media you’re using.

This doesn’t help either:

NeroVision Physical memory : 510MB (522240kB)
[16:47:57] NeroVision Free physical memory: 36MB (37420kB)
[16:47:57] NeroVision Memory in use : 92 %

Should get more memory to keep things from overworking trying to perform their job.