Burning goes to 99% then I get "write error." Please help!

For some reason Nero has been doing this lately, the only thing I’ve changed is adding a sata HD. I upated my CD burner firmware and still the same problem. I updated to the latest version of nero and still the same problem. Here is a SS of the error. http://img412.imageshack.us/my.php?image=neroerroryr9.jpg Oh also to mentioned I was doing a simulation burn and still received the same error, so it’s not my CD-Rs I’m using. Here is my NERO LOG:

bk

1C82-0000-19E5-MAAX-4000-2558-****

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.8.5.0
Internal Version: 7, 8, 5, 0

Recorder: <LITE-ON LTR-52327S> Version: QS0E - HA 1 TA 0 - 7.8.5.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON LTR-52327S >Version: QS0E - HA 1 TA 0 - 7.8.5.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST380021A atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD400BB-32CXA0 atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST3320620AS atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-52327S atapi Port 3 ID 0 DMA: On

=== CDRom-Device-Map ===
LITE-ON LTR-52327S D: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 638MB (653904kB)
Memory in use : 37 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

17.5.2007
CueSheet
12:46:53 AM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

12:46:53 AM #2 Text 0 File Burncd.cpp, Line 3187
LITE-ON LTR-52327S
Buffer underrun protection activated

12:46:53 AM #3 Text 0 File Burncd.cpp, Line 3499
Turn on Disc-At-Once, using CD-R/RW media

12:47:18 AM #4 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 366219 ( 81:24.69)
Last address to be written: 356530 ( 79:15.55)

12:47:18 AM #5 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

12:47:18 AM #6 Text 0 File DlgWaitCD.cpp, Line 2949
Recorder: LITE-ON LTR-52327S;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

12:47:18 AM #7 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc for simulation.
(Medium in drive: Unknown. Medium required by compilation: CD-R/RW.)

12:47:18 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_RAW_MODE2 (Cue Sheet Track)
2 indices, index0 (150) provided
original disc pos #0 + 300 (300) = #300/0:4.0
relocatable, disc pos for caching/writing not required/not required
-> TRM_ULTRARAW96_MODE2, 2448, config 4, wanted index0 0 blocks, length 300 blocks [D: LITE-ON LTR-52327S]
1: TRM_DATA_RAW_MODE2 (Cue Sheet Track)
2 indices, index0 (150) provided
original disc pos #0 + 356081 (356081) = #356081/79:7.56
relocatable, disc pos for caching/writing not required/not required
-> TRM_ULTRARAW96_MODE2, 2448, config 4, wanted index0 0 blocks, length 356081 blocks [D: LITE-ON LTR-52327S]
--------------------------------------------------------------

12:47:18 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [D: LITE-ON LTR-52327S] for write in raw writing
DAO infos:
==========
MCN: “”
TOCType: 0x20; Session Closed, disc fixated
Tracks 1 to 2: Idx 0 Idx 1 Next Trk
1: TRM_ULTRARAW96_MODE2, 2448/0x04, FilePos 0 367200 1101600, ISRC “”
2: TRM_ULTRARAW96_MODE2, 2448/0x04, FilePos 1101600 1468800 873155088, ISRC “”
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 300 | 0 | 0x00
300 | 2 | 0 | 0x41 | 0 | 0 | 0x00
450 | 2 | 1 | 0x41 | 356081 | 450 | 0x00
356531 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

12:47:18 AM #10 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

12:47:19 AM #11 Text 0 File Burncd.cpp, Line 4278
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

12:47:19 AM #12 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started

12:47:19 AM #13 Text 0 File Burncd.cpp, Line 4397
Cache writing successful.

12:47:19 AM #14 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed

12:47:19 AM #15 Phase 32 File dlgbrnst.cpp, Line 1762
Simulation started at 8x (1,200 KB/s)

12:47:19 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

12:47:19 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #450

12:47:19 AM #18 Text 0 File MMC.cpp, Line 17654
StartDAO : CD-Text - Off

12:47:19 AM #19 Text 0 File MMC.cpp, Line 22344
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON

12:47:19 AM #20 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

12:57:25 AM #21 SPTI -1135 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 05 55 F2 00 00 1A 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x061f6a40: Len xf8a0
0x00 FF FF FF FF FF FF FF FF FF FF 00 76 C4 32 62
0x01 29 62 11 81 09 02 09 A8 02 FF 3B A1 12 1F 5B
0x2F 9E 80 C5 68 66 AF 4A F5 7D FE 1F FF B7 FF C9

12:57:25 AM #22 CDR -1135 File Writer.cpp, Line 303
Write error
D: LITE-ON LTR-52327S

12:57:26 AM #23 SPTI -1169 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08

12:57:28 AM #24 Phase 34 File dlgbrnst.cpp, Line 1762
Simulation failed at 8x (1,200 KB/s)

12:57:28 AM #25 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

12:57:32 AM #26 Text 0 File Cdrdrv.cpp, Line 11214
DriveLocker: UnLockVolume completed

12:57:32 AM #27 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Any help would be awesome!

Don’t know the answer but you may want to check this out.

http://my.nero.com/#1

Welcome both of you to CDFreaks Forum, the way I read your log at the last row of this portion of your log say the media support box is disable:

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 638MB (653904kB)
Memory in use : 37 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

May be that is the problem try to enable that function see if the problem will resolved.