Burning Failed with Plextor 712A

vbimport

#1

Hi all,

I am new here and can use some help.

I just bought my brand new Plextor PX-712A
But it will not complete one burn.

It start burning but somewere during the burn is gives me the error Burn Process Failed.
I tried many speed rate 8x. 6x 4x

System Info:
Asus mainboard
Intel Chipset
P4 3.2Mhz HT
1024 DDR PC2700 cas2

Burn Software info:
NERO 6.3.02

Media:
Platinum DVD+R 8X

Firmware:
1.05
I got it with 1.03 did not work so I upgrade to 1.05 but still the same.

I have always use Platinum DVD+R with NO problems not ones.

This is the log file from Nreo:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’:
Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
Nero version: 6.3.0.2
Recorder: <PLEXTOR DVDR PX-712A> Version: 1.05 - HA 2 TA 1 -
6.3.0.2
Adapter driver: <atapi> HA 2
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <Generic STEALTH DVD >Version: - HA 0 TA 0 -
6.3.0.2
Adapter driver: <St323dk> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : Generic STEALTH DVD St323dk Port 0 ID 0
DMA: Off
CdRomPeripheral : PLEXTOR DVD-ROM PX-116A3 atapi Port 2 ID 0
DMA: Off
CdRomPeripheral : PLEXTOR DVDR PX-712A atapi Port 2 ID 1
DMA: Off
DiskPeripheral : Maxtor 6Y120M0 atapi Port 3 ID 0
DMA: On

=== CDRom-Device-Map ===
Generic STEALTH DVD L: CDRom2

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 1014MB (1039084kB)
Free physical memory: 704MB (721792kB)
Memory in use : 30 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

12.9.2004
UDF/ISO compilation
6:24:36 PM #1 Phase 112 File dlgbrnst.cpp, Line 1800
DVD-Video files reallocation started

6:24:36 PM #2 Phase 114 File dlgbrnst.cpp, Line 1800
DVD-Video files reallocation completed (no file modified)

6:24:36 PM #3 Text 0 File Isodoc.cpp, Line 6029
Iso document burn settings

Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

6:24:36 PM #4 Phase 111 File dlgbrnst.cpp, Line 1800
DVD-Video files sorted

6:24:36 PM #5 Text 0 File Reader.cpp, Line 118
Reader running

6:24:36 PM #6 Text 0 File Writer.cpp, Line 124
Writer PLEXTOR DVDR PX-712A running

6:24:36 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

6:24:36 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

6:24:36 PM #9 Text 0 File Burncd.cpp, Line 3101
Turn on Disc-at-once, using DVD media

6:24:36 PM #10 Text 0 File DlgWaitCD.cpp, Line 240
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

6:24:36 PM #11 Text 0 File DlgWaitCD.cpp, Line 245
Write in overburning mode: FALSE

6:24:36 PM #12 Text 0 File DlgWaitCD.cpp, Line 2085
Recorder: PLEXTOR DVDR PX-712A, Media type: DVD+R

6:24:36 PM #13 Text 0 File DlgWaitCD.cpp, Line 406
>>> Protocol of DlgWaitCD activities: <<<

6:24:36 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/required, no
patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
2286112 blocks [PLEXTOR DVDR PX-712A ]

6:24:36 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [PLEXTOR DVDR PX-712A ] for write in CUE-sheet-DAO
DAO infos:

MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0
4681957376, ISRC “”
DAO layout:

_Start|___Track|Idx|RecDep|CtrlAdr
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286112 | lead-out | 1 | 0x00 | 0x41

6:24:36 PM #16 Phase 24 File dlgbrnst.cpp, Line 1800
Caching of files started

6:24:37 PM #17 Text 0 File Burncd.cpp, Line 4073
Cache writing successful.

6:24:37 PM #18 Phase 25 File dlgbrnst.cpp, Line 1800
Caching of files completed

6:24:37 PM #19 Phase 36 File dlgbrnst.cpp, Line 1800
Burn process started at 4x (5,520 KB/s)

6:24:37 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos,
orig at #0): write at #0

6:24:37 PM #21 SCSI -1066 File Cdrdrv.cpp, Line 1171
SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x02D66000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

6:24:37 PM #22 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 14:17,667 (857667ms) -> OK

6:24:37 PM #23 Text 0 File DVDPlusRW.cpp, Line 564
Start write address at LBA 0
DVD high compatibility mode: Yes

6:24:39 PM #24 Text 0 File Cdrdrv.cpp, Line 1277
18:24:39.250 - PLEXTOR DVDR PX-712A\H2 T1 : Queue again later

6:28:26 PM #25 SCSI -500 File Cdrdrv.cpp, Line 1431
SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x03370000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x07 0x02 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

6:28:26 PM #26 CDR -500 File Writer.cpp, Line 301
SCSI command aborted
PLEXTOR DVDR PX-712A\H2 T1

6:28:27 PM #27 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

6:28:27 PM #28 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

6:28:27 PM #29 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

6:28:27 PM #30 CDR -600 File WriterStatus.cpp, Line 164
Device not available
PLEXTOR DVDR PX-712A\H2 T1

6:28:27 PM #31 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once

6:28:28 PM #32 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

6:28:28 PM #33 CDR -600 File WriterStatus.cpp, Line 169
Device not available
PLEXTOR DVDR PX-712A\H2 T1

6:28:28 PM #34 TRANSFER -39 File WriterStatus.cpp, Line 169
Could not perform EndSession

6:28:28 PM #35 Phase 38 File dlgbrnst.cpp, Line 1800
Burn process failed at 4x (5,520 KB/s)

Existing drivers:
File ‘Drivers\atapi.sys’: Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912
bytes, created 8/29/2002 1:27:50 AM (Adapter driver for rec)
File ‘Drivers\st323dk.sys’: Ver=3.23.0.0, size=88736 bytes, created
10/13/2002 8:24:30 PM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs :
0 (Security Option)


#2

Hi Mysterio and welcome to the forum.

You need to enable DMA transfers for your PX-712A for it to work correctly. Do a search or click here for instructions on how to enable DMA.


#3

Thx,

I @ work at the moment but I’ll try as soon as I get home.


#4

Like Taroth said, enable DMA.
Also you should upgrade your Nero to the latest version.


#5

Hi, welcome to the forum

i hope it’s not the ‘Mirror Platinum DVD+R’ discs you were trying out, if it is then don’t worry and throw the damn things away, they never worked on my 712A, just buy some different dvd media other than those Mirror TY01 fakes.


#6

I have two secondary IDE channels.
The first is set to:
Device 0
Transfer mode : DMA if Available
Current Transfer mode: Ultra DMA Mode 4

Device 1
Transfer mode : DMA if Available
Current Transfer mode: Ultra DMA Mode 2

The second IDE channels is set to:
Device 0
Transfer mode : DMA if Available
Current Transfer mode: Not Applicable

Device 1
Transfer mode : DMA if Available
Current Transfer mode: Not Applicable

==>> NOTE: My DVD/RW PX-712A is set to Slave and my DVD-ROM PX-716A also from Plextor is set to Master <<==

PS. I also have two Primary IDE Channels but only one HDD SATA


#7

If possible, try setting the writer up as a master on its own IDE channel, or switch the DVD-ROM drive to slave and the writer to master.

good luck!


#8

Ok, I’ll try that.
Both Rom and Burner are on the same IDE since I have a SATA HDD, so no other IDE cable.

In the mean time I just finish the self-Diagnostic test and all is ok :slight_smile:
So the drive is not the problem.

I’ll get back to you on that master/slave switch.

I’ll try another burn and ruin another disc :a to see if this all works.

PS. I have update my NERO 6.3.0.2 with the CD I got with the burner and now I have NREO Version 6.3.1.6 Plextor.
IS THIS OK? :confused:


#9

Latest version of Nero is 6.3.1.20
go to www.nero.com to get it.


#10

OK.

I got NERO 6.3.1.20 now.
I am gonna start the burn now at 8X.


#11

You’re not gonna believe it.

I just did my first good Burn, and this at 8X.
I am gonna do another one just to make sure this was not just to tease me :iagree:

My settings are now:
Burner at Master
Rom at Slave
NERO Version: 6.3.1.20
Firmware: 1.05

Thx allot guys… :bow:

I’ll let y’all know how the second burn went.


#12

Also the second Burn is a succesfull burn.

My problem seems to be solved y’all :smiley:

Again thx allot for all your help.


#13

What did you change Mysterio? Did you just update Nero or did you also try some of the other suggestions? Good to hear you problems are solved.


#14

What I have done in total is the following:

Did an self diagnostic to check if the drive is ok
Here is the link to the test http://www.plextor.com/english/support/faqs/HW00008.htm
Update NERO to 6.3.1.20
Firmware to 1.05
And set the PX-712A as MASTER

Goodluck.


#15

Thanks for letting us know.

[Dutch]Oh, en succes met je Plextor ;)[/Dutch]


#16

:sad: :sad: :sad:

Ik d8 dat alles ok is maar helaas.
Toch nog 2 dvd’s weg moeten gooien gister.

Here is an image van een van de failed burn:


#17

Just wanna to let y’all know that both my burning and hickup problem has been solved.

I have completely re-install my OS.
Downloaded every single latest driver and firmware i could find about all my systems and hardware and install them.

Made an Image and then started making burns and so far i have made a dozen dvd burns and NO problem so far :iagree:

I wanna thx all who tried to help me and may the force be with y’all.


#18

Thanks for keeping us up-to-date Mysterio. Happy burning! :wink: