Burning error's with dvd fab or shrink

[qanda]This thread is about the Sony DRU-710A. Click here to see full specs[/qanda]I am having constant error messages when trying to burn movies with dvd fab or shrink dvd software. I have had no problem for over a couple years, now I can’t get even one to work! I have updated the firmware for the burner, both software’s listed above, and I recently downloaded the trial version of Nero 9 to see if that would help (I was on Nero 4. I know, way old!!) and it has not helped. I was also told to try to burn with a slower speed, which I did last night and that didn’t help either. Below was the burn message:

Any ideas?

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero API version: 9.2.6.100
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 9\Nero Express
Application: ahead\Nero - Burning Rom
Internal Version: 9, 2, 6, 100

Recorder: <SONY DVD RW DRU-710A> Version: BYX5 - HA 1 TA 0 - 9.2.6.100
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data

=== Scsi-Device-Map ===
DiskPeripheral : IOMEGA ZIP 250 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD2000JD-00HBB0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 3 ID 0 DMA: Off
CdRomPeripheral : SONY DVD-ROM DDU1612 atapi Port 3 ID 1 DMA: Off

=== CDRom-Device-Map ===
SONY DVD RW DRU-710A E: CdRom0
SONY DVD-ROM DDU1612 F: CdRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523756kB)
Free physical memory: 193MB (197820kB)
Memory in use : 62 %
Uncached PFiles: 0x0
Global Bus Type: default (0)
Check supported media : Disabled (0)

22.1.2009
NeroAPI
9:47:36 PM #1 Phase 112 File APIProgress.cpp, Line 275
DVD-Video files reallocation started

9:47:36 PM #2 Phase 114 File APIProgress.cpp, Line 275
DVD-Video files reallocation completed (no file modified)

9:47:36 PM #3 Text 0 File SCSIPTICommands.cpp, Line 452
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

9:47:36 PM #4 Text 0 File AudioCompilationImpl.cpp, Line 838
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

9:47:36 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)

9:47:36 PM #6 Phase 1 File APIProgress.cpp, Line 259
Reading directories

9:47:36 PM #7 Phase 2 File APIProgress.cpp, Line 259
Creating directories

9:47:36 PM #8 Phase 6 File APIProgress.cpp, Line 259
Finishing

9:47:36 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)

9:47:36 PM #10 Phase 1 File APIProgress.cpp, Line 259
Reading directories

9:47:36 PM #11 Phase 2 File APIProgress.cpp, Line 259
Creating directories

9:47:36 PM #12 Text 0 File Burncd.cpp, Line 3587
Turn on Disc-At-Once, using DVD media

9:47:37 PM #13 Phase 74 File APIProgress.cpp, Line 259
Checking discs

9:47:37 PM #14 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)

9:47:37 PM #15 Phase 1 File APIProgress.cpp, Line 259
Reading directories

9:47:37 PM #16 Phase 2 File APIProgress.cpp, Line 259
Creating directories

9:47:37 PM #17 Phase 6 File APIProgress.cpp, Line 259
Finishing

9:47:37 PM #18 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)

9:47:37 PM #19 Phase 1 File APIProgress.cpp, Line 259
Reading directories

9:47:37 PM #20 Phase 2 File APIProgress.cpp, Line 259
Creating directories

9:47:37 PM #21 Text 0 File DlgWaitCD.cpp, Line 313
Last possible write address on media: 2298495
Last address to be written: 2286159

9:47:37 PM #22 Text 0 File DlgWaitCD.cpp, Line 325
Write in overburning mode: NO

9:47:37 PM #23 Text 0 File DlgWaitCD.cpp, Line 2882
Recorder: SONY DVD RW DRU-710A, Media type: DVD-R
Disc Manufacturer ID: <DAXON0> <16S>
Disc Application Code: 64, Disc Physical Code: 193

9:47:37 PM #24 Text 0 File DlgWaitCD.cpp, Line 500
>>> Protocol of DlgWaitCD activities: <<<
=========================================

9:47:37 PM #25 Text 0 File ThreadedTransferInterface.cpp, Line 744
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286160 (2286160) = #2286160/508:2.10
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286160 blocks [E: SONY DVD RW DRU-710A]
--------------------------------------------------------------

9:47:37 PM #26 Text 0 File ThreadedTransferInterface.cpp, Line 946
Prepare [E: SONY DVD RW DRU-710A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682055680, ISRC “”
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2286160 | 0 | 0x00
2286160 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

9:47:42 PM #27 Text 0 File SCSIPTICommands.cpp, Line 266
Error on LockVolume: Access is denied.

9:47:42 PM #28 Text 0 File SCSIPTICommands.cpp, Line 316
SPTI - Error 5 on DismountVolue: Access is denied.

9:47:47 PM #29 Text 0 File SCSIPTICommands.cpp, Line 266
Error on LockVolume: Access is denied.

9:47:47 PM #30 Text 0 File Burncd.cpp, Line 4320
Caching options: cache CDRom or Network-No, small files-Yes (<32KB)

9:47:47 PM #31 Phase 24 File APIProgress.cpp, Line 275
Caching of files started

9:47:47 PM #32 Text 0 File Burncd.cpp, Line 4442
Cache writing successful.

9:47:47 PM #33 Phase 25 File APIProgress.cpp, Line 275
Caching of files completed

9:47:47 PM #34 Phase 36 File APIProgress.cpp, Line 275
Burn process started at 8x (11,080 KB/s)

9:47:47 PM #35 Text 0 File ThreadedTransferInterface.cpp, Line 2676
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

9:47:47 PM #36 Text 0 File DVDR.cpp, Line 3279
Recording mode: Sequential Recording Mode

9:47:47 PM #37 Text 0 File DVDR.cpp, Line 3433
Start write address at LBA 0
DVD high compatibility mode: Yes

9:47:47 PM #38 Text 0 File Cdrdrv.cpp, Line 9966
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
Outer Limit of Data Recordable Area: 0 h
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0, Extended part version: 33
Start PSN of the Extra Border Zone: 0 h
Start PSN of Physical format information blocks in Extra Border Zone: 0 h
Media Specific [16…783]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`…0@P…!..
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00

9:47:47 PM #39 Text 0 File DVDR.cpp, Line 3571
Reserved Track size: 2286160 (22E250h, 4465MB) -> return code 0

9:47:47 PM #40 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 74390400

9:47:47 PM #41 Phase 42 File APIProgress.cpp, Line 259
Writing lead-in

9:48:55 PM #42 SPTI -1106 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x190b0040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

9:48:55 PM #43 CDR -1106 File Writer.cpp, Line 306
Power calibration error
E: SONY DVD RW DRU-710A

9:48:55 PM #44 Text 0 File DVDR.cpp, Line 3838
EndDAO: Last written address was -1 (FFFFFFFFh)

9:48:55 PM #45 Text 0 File DVDPlusDualLayer.cpp, Line 1424
SetDriveCaps: Set LAST LBA of layer 1 to 0

9:48:55 PM #46 Phase 38 File APIProgress.cpp, Line 275
Burn process failed at 8x (11,080 KB/s)

9:48:55 PM #47 Text 0 File AudioCompilationImpl.cpp, Line 863
DRM: DRM burn session terminated.

9:48:55 PM #48 Text 0 File AudioCompilationImpl.cpp, Line 892
DRM: Closing entire DRM handling. Bye.

9:48:55 PM #49 Text 0 File SCSIPTICommands.cpp, Line 316
SPTI - Error 5 on DismountVolue: Access is denied.

9:48:57 PM #50 Text 0 File Cdrdrv.cpp, Line 11243
DriveLocker: UnLockVolume completed

9:48:57 PM #51 Text 0 File SCSIPTICommands.cpp, Line 452
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Turn your DMA on.
</not></daxon0></ide></sony>

I just tried that and I still get the error message. The PIO was on, but no help once I got it off. I then uninstalled and then reinstalled all of the software components, but I still get nothing. I am beginning to think the Sony burner is bad. I did burn a cd recently though. It’s just movies that are giving me grief.