Burning Error at Layer 2 with Prodata DVD+R DL

I am using the latest Nforce drivers for Windows Vista 32-Bit and Nero 7.8.5.0.

The error occurs during layer 2 when trying to burn a WMV file in a DVD9 UDF session. Please advise.

Here is a log:

Hanif

1C82-0000-19E5-MAAX-4003-7828-****

Windows XP 6.0
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.8.5.0
Internal Version: 7, 8, 5, 0

Recorder: <BENQ DVD LS DW1655> Version: BCGB - HA 1 TA 0 -

7.8.5.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <GG3415J IAW222G >Version: 1.0 - HA 1 TA 1

  • 7.8.5.0
    Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
OtherPeripheral : SI Pseudo Device 0000 Si3114r5 Port 2 ID 31

DMA: Off
: ST3320620AS 3.AA nvstor Port 3 ID 1

DMA: Off
: Maxtor 6L100M0 BANC nvstor Port 4 ID 1

DMA: Off
CdRomPeripheral : GG3415J IAW222G 1.0 a3y1fun1 Port 6 ID 0

DMA: Off

=== CDRom-Device-Map ===
BENQ DVD LS DW1655 E: CDRom0
GG3415J IAW222G G: CDRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1021MB (1046400kB)
Free physical memory: 373MB (382600kB)
Memory in use : 63 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

26.5.2007
UDF compilation
1:50:48 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

1:50:48 PM #2 Text 0 File Isodoc.cpp, Line 6608
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical

1:50:48 PM #3 Text 0 File Burncd.cpp, Line 3499
Turn on Disc-At-Once, using DVD media

1:50:48 PM #4 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 4150719 (922:22.69, 8106MB)

1:50:48 PM #5 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

1:50:48 PM #6 Text 0 File DlgWaitCD.cpp, Line 2949
Recorder: BENQ DVD LS DW1655, Media type: DVD+R9 Double Layer

1:50:48 PM #7 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

1:50:48 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 4150720 (4150720) = #4150720/922:22.70
relocatable, disc pos for caching/writing not required/

required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks,

length 4150720 blocks [E: BENQ DVD LS DW1655]
--------------------------------------------------------------

1:50:48 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: BENQ DVD LS DW1655] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx

1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0

0 8500674560, ISRC “”
DAO layout:
===========

__Start|___Track|Idx|CtrlAdr|_Size|NWA|RecDep

_
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 4150720 | 0 | 0x00
4150720 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

1:50:48 PM #10 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

1:50:48 PM #11 Text 0 File Burncd.cpp, Line 4278
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

1:50:49 PM #12 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started

1:50:49 PM #13 Text 0 File Burncd.cpp, Line 4397
Cache writing successful.

1:50:49 PM #14 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed

1:50:49 PM #15 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 2.4x (3,324 KB/s)

1:50:49 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch

infos, orig at #0): write at #0

1:50:49 PM #17 Text 0 File DVDPlusDualLayer.cpp, Line 477
Disc finalized, LBA total Image size: 4150720 (8106MB), Last LBA

L0: 2075359 (4053MB)

1:50:49 PM #18 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 21 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
Buffer x00000000: Len x804

1:50:49 PM #19 Text 0 File DVDPlusDualLayer.cpp, Line 642
L0 Data Zone Capacity set to 2075360 (1FAAE0h, 4053MB) -> OK,

confirmed setting

1:50:49 PM #20 CDR -1205 File DVDPlusDualLayer.cpp, Line 669
Burning Layer 1

1:50:49 PM #21 Text 0 File DVDPlusDualLayer.cpp, Line 679
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode

1:50:49 PM #22 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
Buffer x00000000: Len x804

1:50:49 PM #23 CDR -1207 File DVDR.cpp, Line 6356
Book Type automatically set to: Current recorder setting

1:50:49 PM #24 Text 0 File DVDPlusRW.cpp, Line 674
Start write address at LBA 0
DVD high compatibility mode: Yes

1:50:49 PM #25 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

2:13:33 PM #26 CDR -1206 File DVDPlusDualLayer.cpp, Line 1958
Burning Layer 2

2:13:33 PM #27 Text 0 File DVDPlusDualLayer.cpp, Line 1969
Perform layer 1 to 2 jump before writing at address 2075360

(1FAAE0h)

2:13:59 PM #28 SPTI -1135 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 1F AC 20 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 0C
Buffer x00000000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

2:13:59 PM #29 CDR -1135 File Writer.cpp, Line 303
Write error
E: BENQ DVD LS DW1655

2:15:40 PM #30 Text 0 File DVDPlusRW.cpp, Line 934
EndDAO: Last written address 2075680

2:15:40 PM #31 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 2.4x (3,324 KB/s)

2:15:40 PM #32 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for

FSCTL_DISMOUNT_VOLUME

2:15:45 PM #33 Text 0 File Cdrdrv.cpp, Line 11214
DriveLocker: UnLockVolume completed

2:15:45 PM #34 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon

Welcome to CD Freaks.

Unfortunately this type of error often occurs when using non-Verbatim DL +R media. The Verbs are really the only brand that offer a very good chance of a successful burn.

You could try using ImgBurn which is better at DL media burning than just about any other app but I doubt that it would have more success than Nero.

wow really? I was not aware of that…I wasted $20 on a spindle of 10 of these…lol…thanks for the tip…never heard of that before!