Burning DVD-R(W) problem

vbimport

#1

The following problem is driving me almost mad. Some help would be appreciated!

I’ve faced many many ridiculous problems with the render process of Pinnacle 8. One of the suggestions I’ve read on the Pinnacle forum was to defragment my harddisk to optimize. Although there was plenty of free space on my hard disk I decided to buy another one (160 Mb.) and I performed the defragmation action many times.
Four heart attacking weeks later I managed to produce a burnable image of the movie (2,2 Gb) Again Mr. Murphey and Ms. Hell decided to return to my PC and disturbed the burning process. My DVD-burner (Toshiba SD-R5002) refused to burn any DVD from any brand of any type (write once or rewritable.) However writing a CD works fine, no problem! (I didn’t try the rewritable, but I don’t expect a problem) Reading DVD’s is also no problem at all.
My last succesfull DVD-burning was on the 11 september, two weeks after installing the additional disc.

Other information:
DVD brands:
MMore DVD-RW (unused, to check the quality two of them were successfully burned on another PC and were readable on my PC, but inerasable)
MMore DVD-R (I always used the MMore without any problem), Maxell DVD-R, TDK DVD-R (all error message: disc not empty) and Philips DVD+R(W) (just to sure)

DVD Shrink 3.2:
Message: The R/W disc is not empty, do you want to erase it? However all output files were successfully encoded, and they are ready for burning with appropriate DVD burning software.

Ulead DVD MovieFactory 2SE
Message: The disc is not empty, neither there is no disc in the device. Insert an empy disc and try again.

Pinnacle 8.1 and 8.3 and 9
Trying to burn a 14 seconds short movie, which was burned successfully in the past.
Message: The RW-disc has to be erased before burning. Do you want to erase the disc? Yes, I want.
After a few seconds the second message appears: A fatal and unknown error has occurred.

InstantWrite DVD-RW format
Initiated by a right mouseclick in the explorer. For a quick format as well as a full format the error message is the same: ‘An error occurred while formatting the medium’

Other useless attempts:
Checking if cable new harddrive is on the same IDE as the DVD (no!)
Detach new harddrive (no result)
Checking ASPI drivers (at first sight no problem, but I’m not familiar with this stuff)
Uninstall NERO, reboot, check register with JV16 Powertools and reinstall (several times)
Checking for new firmware for the Toshiba, there was an update but this was concerning the regiocode. I decided to ignore the new version.
Talk to the PC and threaten the stupid device with hell and rubbish dump.

Nero Express:
Message: the disc is not rewritable and therefore cannot be erased. Please insert a rewritable disc.
Disc information: the disc is empty with in the heading a strange remark : blanc read only CD (instead of DVD)
A quick erase and a full erase didn’t have any positive result.

Some details from the NERO logfile:
#8 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: DVD-RW. Medium required by compilation: DVD-R/RW.)
This disc is not empty.
(Medium in drive: DVD-RW. Medium required by compilation: DVD-R/RW.)
VMS. Disc erase failed.
Accessing disc…
(Medium in drive: DVD-RW. Medium required by compilation: DVD-R/RW.)

#9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2768 (2768) = #2768/0:36.68
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2768 blocks [TOSHIBA DVD-ROM SD-R5002]

#10 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [TOSHIBA DVD-ROM SD-R5002] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc not fixated
Tracks 2 to 2:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 5668864, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
84608 | lead-in | 0 | 0x00 | 0x41
84608 | 2 | 0 | 0x00 | 0x41
84608 | 2 | 1 | 0x00 | 0x41
87376 | lead-out | 1 | 0x00 | 0x41

#11 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started

#12 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.

#13 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed

#14 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 1x (1.385 KB/s)

#15 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #84608

#16 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 1:28,846 (88846ms) -> OK

#17 Text 0 File DVDR.cpp, Line 1879
Recording mode: Restricted Overwrite Mode

#18 Phase 134 File dlgbrnst.cpp, Line 1845
Quick Grow last Border

#19 SCSI -1046 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03265000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x04 0x11 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

#20 Phase 65 File dlgbrnst.cpp, Line 1845 Burn process started

#21 Text 0 File DVDR.cpp, Line 2020 Start write address at LBA 0
DVD high compatibility mode: Yes

#22 CDR -1046 File ThreadedTransferInterface.cpp, Line 1614 Illegal disc

#23 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1614 Could not perform start of Disc-at-once

#24 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK

#25 Phase 38 File dlgbrnst.cpp, Line 1845 Burn process failed at 1x (1.385 KB/s)

Some hard- and software details DVD (from Nero Infotool 2)
Drive Information

Drive TOSHIBA DVD-ROM SD-R5002
Type : DVD-R/RW Combo Drive
Firmware Version : 1030
Buffer Size : 2 MB
Date : 09-13-02
Serial Number : ?
Drive Letter : F:
Location : 1:1
Mechanism : Tray
Read Speed : 40, 32, 20, 6 X
Write Speed : 16, 12, 8, 4 X

Read CD Text : Yes
Return C2 Pointers : Yes
Read CD-R : Yes
Read CD-RW : Yes
Read DVD-ROM : Yes
Read DVD-RAM : No
Read DVD-R : Yes
Read DVD-RW : Yes
Read DVD+R : No
Read DVD+RW : No
Read Digital Audio : Yes
Read CD+G : Yes
Read VideoCD : Yes
Write CD-R : Yes
Write CD-RW : Yes
Write DVD-R : Yes
Write DVD-RW : Yes
Write DVD+R : No
Write DVD+RW : No
Write DVD-RAM : No
Buffer Underrun Protection : Yes
Mount Rainier : No
Modes : Packet, TAO, DAO, SAO, RAW SAO, RAW SAO 16, RAW SAO 96, RAW DAO 96
Region Protection Control : RPC II
Region : 2
Changes User : 4
Changes Vendor : 4

Adapter 2

Description: Secondary IDE Channel
Driver
Description: System32\DRIVERS\atapi.sys
Company: Microsoft Corporation
Version: 5.1.2600.0 (XPClient.010817-1148)
Description : IDE/ATAPI Port Driver
Attached Devices
Description: Master: IDE DVD-ROM 16X
Type: CD-Rom Drive
DMA: On
Autorun: On
Description: Slave: TOSHIBA DVD-ROM SD-R5002
Type: CD-Rom Drive
DMA : On
Autorun: On

Software Information

Operating System: Windows XP Professional (5.01.2600 )
ASPI: Win32 Nero Aspi Library 2.0.1.68 Ahead Software AG
Description: Nero Burning ROM
Version: 6, 3, 1, 20
Company: Ahead Software AG
Version Check : Ok
Description: NeroVision Express
Version: 2,0,1,14
Company: Ahead Software AG

Driver Information

Driver: ASAPIW2k
Description: ASAPI
Version : 6, 0, 2, 27
Company: Pinnacle Systems GmbH
Driver: Aspi32
Description: ASPI for WIN32 Kernel Driver
Version: 4.71 (0002)
Company: Adaptec

ASPI Information

System ASPI: ASPI is installed and working properly
WNASPI32.DLL: 2.0.1.68 160016 bytes July 22, 2004
Nero ASPI: ASPI is installed and working properly
WNASPI32.DLL: 2.0.1.68 160016 bytes July 22, 2004


#2

Cross-post. :frowning: I’ll close this thread but leave this one open. :cop: