Burning Coasters - need help

Hello, everyone,

I am not good with this kind of stuff so I am wondering if someone would be kind enough to take a look at my problem. I would really appreciate it!

I am trying to burn video files with Nero 8 and I get stalled or failed burns.

My burner is a TSST corp DVD ± RW TSH653A on a Dell desktop. I also run Vista.

Here is the error log from Nero:

Windows XP 6.0
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.0.3.0
Internal Version: 8, 0, 3, 0
 (Nero Express)
Recorder:             <TSSTcorp DVD+-RW TS-H653A>Version: D400 - HA 1 TA 0 - 8.0.3.0
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default
CD-ROM:               <TSSTcorp DVD+-RW TS-H653A>Version: D400 - HA 1 TA 0 - 8.0.3.0
 Adapter driver:      <IDE>                     HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : WDC WD3200KS-75PFB0            iaStorV Port 0 ID 0  DMA: On 
CdRomPeripheral      : TSSTcorp DVD+-RW TS-H653A      iaStorV Port 0 ID 1  DMA: Off
CdRomPeripheral      : REXYZ   NGDAB09         1.03  ao7hvriu Port 2 ID 0  DMA: Off

=== CDRom-Device-Map ===
TSSTcorp DVD+-RW TS-H653A  D:   CdRom0
REXYZ NGDAB09              E:   CdRom1
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
BUFE           : 0
Physical memory     : 2045MB (2094300kB)
Free physical memory: 1258MB (1288376kB)
Memory in use       : 38 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

8.6.2009
UDF/ISO compilation
7:24:21 PM	#1 Text 0 File SCSIPTICommands.cpp, Line 424
	LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	
7:24:21 PM	#2 Phase 112 File dlgbrnst.cpp, Line 1762
	DVD-Video files reallocation started
	
7:24:21 PM	#3 Phase 114 File dlgbrnst.cpp, Line 1762
	DVD-Video files reallocation completed (no file modified)
	
7:24:21 PM	#4 Text 0 File Isodoc.cpp, Line 6668
	UDF document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : TRUE
	Multisession            : FALSE
	Burning mode            : DAO
	Mode                    : 1
	UDF Mode                : UDF/ISO bridge
	UDF Options             : automatic
	UDF Revision            : 1.02
	UDF Partition Type      : physical
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  : FALSE
	Allow pathdepth more than 8 directories : FALSE
	Allow more than 255 characters in path  : FALSE
	Write ISO9660 ;1 file extensions        : TRUE
	
7:24:21 PM	#5 Phase 111 File dlgbrnst.cpp, Line 1762
	DVD-Video files sorted
	
7:24:21 PM	#6 ISO9660GEN -11 File Geniso.cpp, Line 3345
	First writeable address = 0 (0x00000000)
	
7:24:21 PM	#7 ISO9660GEN -11 File Geniso.cpp, Line 3345
	First writeable address = 0 (0x00000000)
	
7:24:21 PM	#8 Text 0 File Burncd.cpp, Line 3520
	Turn on Disc-At-Once, using DVD media
	
7:24:21 PM	#9 Text 0 File DlgWaitCD.cpp, Line 307
	Last possible write address on media:  2298495 (510:46.45, 4489MB)
	Last address to be written:            2186751 (485:56.51, 4270MB)
	
7:24:21 PM	#10 Text 0 File DlgWaitCD.cpp, Line 319
	Write in overburning mode: NO (enabled: CD)
	
7:24:21 PM	#11 Text 0 File DlgWaitCD.cpp, Line 2972
	Recorder: TSSTcorp DVD+-RW TS-H653A, Media type: DVD-R
	 Disc Manufacturer: SONY16 - D1
	 Disc Application Code: 64, Disc Physical Code: 193
	
7:24:21 PM	#12 Text 0 File DlgWaitCD.cpp, Line 493
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
7:24:21 PM	#13 Text 0 File ThreadedTransferInterface.cpp, Line 795
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 2186752 (2186752) = #2186752/485:56.52
	    relocatable, disc pos for caching/writing not required/ required
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2186752 blocks [D: TSSTcorp DVD+-RW TS-H653A]
	--------------------------------------------------------------
	
7:24:22 PM	#14 Text 0 File ThreadedTransferInterface.cpp, Line 997
	Prepare [D: TSSTcorp DVD+-RW TS-H653A] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:                                  Idx 0         Idx 1      Next Trk
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4478468096, ISRC ""
	DAO layout:
	===========
	 ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
	        0 |  lead-in |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   1 |    0x41 |  2186752 |        0 | 0x00
	  2186752 | lead-out |   1 |    0x41 |        0 |        0 | 0x00
	
7:24:22 PM	#15 Text 0 File SCSIPTICommands.cpp, Line 215
	SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
	
7:24:22 PM	#16 Text 0 File Burncd.cpp, Line 4306
	Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
	
7:24:22 PM	#17 Phase 24 File dlgbrnst.cpp, Line 1762
	Caching of files started
	
7:24:22 PM	#18 Text 0 File Burncd.cpp, Line 4425
	Cache writing successful.
	
7:24:22 PM	#19 Phase 25 File dlgbrnst.cpp, Line 1762
	Caching of files completed
	
7:24:22 PM	#20 Phase 36 File dlgbrnst.cpp, Line 1762
	Burn process started at 4x (5,540 KB/s)
	
7:24:22 PM	#21 Text 0 File ThreadedTransferInterface.cpp, Line 2723
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
7:24:22 PM	#22 Text 0 File DVDR.cpp, Line 3227
	Recording mode: Sequential Recording Mode
	
7:24:22 PM	#23 Text 0 File DVDR.cpp, Line 3383
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
7:24:22 PM	#24 Text 0 File Cdrdrv.cpp, Line 9918
	---- Disc Structure: Physical Format Information (00h) ----
	Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	  Revision number of maximum recording speed: 6.0
	  Revision number of minimum recording speed: -
	  Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - - 
	  Class: 0
	  Start sector number of the current Border-Out: 0 h
	  Start sector number of the next Border-In:     0 h
	 Media Specific [16..63]:
	    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00    .`...0@P...!....
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	
7:24:22 PM	#25 Text 0 File ThreadedTransfer.cpp, Line 269
	Pipe memory size 83836800
	
7:25:02 PM	#26 Text 0 File Cdrdrv.cpp, Line 1342
	19:25:02.937 - ã©„å å“æ”ç‰¯â°å™„â­„åˆ­â—å”ä ­ã”¶ä„³ : Queue again later
	
7:35:35 PM	#27 SPTI -1135 File SCSIPassThrough.cpp, Line 181
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x0C
	Sense Qual: 0x00
	CDB Data:   0x2A 00 00 04 82 00 00 00 20 00 00 00 
	Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C 
	Buffer x1a2947c0: Len x10000
	0x00 00 01 BA 44 47 1E A9 25 57 01 89 C3 F8 00 00 
	0x01 E0 07 EC 81 00 00 43 7C 9C 78 A9 08 0C 0D 25 
	0x15 92 B6 CC 15 25 9B 1F 23 1E 70 8A 23 24 7A 60 
	
7:35:35 PM	#28 CDR -1135 File Writer.cpp, Line 312
	Write error
	D: TSSTcorp DVD+-RW TS-H653A
	
7:35:35 PM	#29 Text 0 File DVDR.cpp, Line 3785
	EndDAO: Last written address was 295423 (481FFh)
	
7:35:35 PM	#30 Phase 38 File dlgbrnst.cpp, Line 1762
	Burn process failed at 4x (5,540 KB/s)
	
7:35:35 PM	#31 Text 0 File SCSIPTICommands.cpp, Line 261
	SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
	
7:35:40 PM	#32 Text 0 File Cdrdrv.cpp, Line 11159
	DriveLocker: UnLockVolume completed
	
7:35:40 PM	#33 Text 0 File SCSIPTICommands.cpp, Line 424
	UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Check your storage controllers in hardware–> device manager…according to Nero,your devices don’t run @ full speed.
You can select the dma option from the dropdown box…enable for all devices,reboot,and report back…

Nero doesn’t work worth diddly trying to report DMA status on many newer machines. Anyway, gilmour93’s drive is SATA.

It seems to me the drive isn’t recognizing these disks. I can’t find a mid code in the error report.

Try some Verbatim or Sony disks, and burn them at 8x not 4x.

[QUOTE=Kerry56;2289148]Nero doesn’t work worth diddly trying to report DMA status on many newer machines. Anyway, gilmour93’s drive is SATA.[/QUOTE]

Indeed,my bad…:o

[QUOTE=Kerry56;2289148]It seems to me the drive isn’t recognizing these disks. I can’t find a mid code in the error report…[/QUOTE]

Could it be that the REXYZ NGDAB09 1.03 ao7hvriu Port 2 ID 0 periphial is a virtual Alcohol 120% drive with “ignore media type” enabled?
Could make sense for the unability to read the mid code…

I am using Sony media. I have always used them and never had any problems. In fact, I have never had any problems burning whatsoever until now.

I don’t use Alcohol 120 but Daemon Tools used to start up automatically. I disabled it from starting up recently. I never use it. I have no idea if that helps but hope it might.

Daemon Tools can interfere with burning. If you don’t use it, I’d try uninstalling the program.

If you don’t want to uninstall, there may be a setting within Daemon tools called Hide ATIP or Hide CDR media. Make sure this setting is not checked.

Could it interfere even if it is shut down?

I’m not an expert on Daemon Tools…I just relate the little bit I know about the program and its side effects. :slight_smile: My best guess is that it may have a part in your problem. Try the options I’ve given you and see if there is any improvement.

I personally use Slysoft’s VirtualClone Drive, which is about the only free program they offer. It is a very simple program compared to Daemon Tools though.

And another thought. Just to rule out Nero as a possible suspect in your situation, you should try burning a simple data burn with another program. I suggest ImgBurn, which is a highly respected program around here. It is free to download and use. www.imgburn.com

It also makes log files which you can post here if necessary.

[QUOTE=gilmour93;2289162]Could it interfere even if it is shut down?[/QUOTE]

I dunno what version you have,but with the DT Pro Advanced version,there’s still a service running in the background,even after disabling autostart and automount,it’s called DTProAgent.exe.
Still there by every reboot…

I removed Daemon and a few other needless programs and things are working great again. Thanks for your time and help all!

Glad you got it sorted! :smiley: