Burner Stopped Working

vbimport

#1

Hi have searched the net high and low and can’t figure out why my burner stoppded working. I am using a Lite-On LH-20A1S burner with Nero Ultra 7. I have had several successful burns with the same brand DVDs but now it doesn’t work. My burner is fairly new so I doubt it is bad. It reads dvds/cds but stops buring midway through. I updated firmware but still nothing. He’s my nero log:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 7.5.9.0
Internal Version: 7, 5, 9, 0
(Nero Express)
Recorder: <LITE-ON DVDRW LH-20A1S> Version: 9L09 - HA 1 TA 0 - 7.5.9.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <LITE-ON DVDRW LH-20A1S >Version: 9L09 - HA 1 TA 0 - 7.5.9.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : RN7822R NNO923I 1.01 atoq6g5f Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW LH-20A1S D: CDRom0
RN7822R NNO923I F: CDRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2096432kB)
Free physical memory: 1586MB (1624492kB)
Memory in use : 22 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.6.2008
ISO compilation
2:35:54 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

2:35:54 PM #2 Text 0 File Isodoc.cpp, Line 6509
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

2:35:58 PM #3 Text 0 File Burncd.cpp, Line 3149
LITE-ON DVDRW LH-20A1S
SMART-BURN activated

2:35:58 PM #4 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)

2:35:58 PM #5 Text 0 File Burncd.cpp, Line 3451
Turn on Track-At-Once, using DVD media

2:35:59 PM #6 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1604823 (356:37.48, 3134MB)

2:35:59 PM #7 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)

2:35:59 PM #8 Text 0 File DlgWaitCD.cpp, Line 2903
Recorder: LITE-ON DVDRW LH-20A1S, Media type: DVD-R
Disc Manufacturer: PRINCO - RGM1
Disc Application Code: 64, Disc Physical Code: 193

2:35:59 PM #9 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================

2:35:59 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 821
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1604824 (1604824) = #1604824/356:37.49
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1604824 blocks [D: LITE-ON DVDRW LH-20A1S]
--------------------------------------------------------------

2:35:59 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1024
Prepare [D: LITE-ON DVDRW LH-20A1S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3286679552, ISRC “”
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 1604824 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1604824 | 0 | 0x00
1604824 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

2:35:59 PM #12 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

2:35:59 PM #13 Phase 24 File dlgbrnst.cpp, Line 1746
Caching of files started

2:35:59 PM #14 Text 0 File Burncd.cpp, Line 4278
Cache writing successful.

2:35:59 PM #15 Phase 25 File dlgbrnst.cpp, Line 1746
Caching of files completed

2:35:59 PM #16 Phase 28 File dlgbrnst.cpp, Line 1746
Speed measurement started

2:35:59 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

2:37:08 PM #18 Text 0 File WriterStatus.cpp, Line 113
<D: LITE-ON DVDRW LH-20A1S> start writing Lead-Out at LBA 1604824 (187CD8h), length 0 blocks

2:37:08 PM #19 Phase 29 File dlgbrnst.cpp, Line 1695
Speed measurement completed: 33.7x (46,536 KB/s)

2:37:08 PM #20 Phase 36 File dlgbrnst.cpp, Line 1746
Burn process started at 16x (22,160 KB/s)

2:37:08 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

2:37:09 PM #22 Text 0 File DVDR.cpp, Line 3058
Recording mode: Sequential Recording Mode for Multisession

2:37:09 PM #23 Text 0 File DVDR.cpp, Line 3214
Start write address at LBA 0
DVD high compatibility mode: No

2:37:09 PM #24 Text 0 File Cdrdrv.cpp, Line 9234
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16…63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`…0@P…!..
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

2:37:41 PM #25 SPTI -1076 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1076)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x28
Sense Qual: 0x00
CDB Data: 0x5C 00 00 00 00 00 00 00 0C 00 00 00
Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 28
Buffer x0615c280: Len xc

2:37:41 PM #26 SPTI -1064 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1064)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 21 02
Buffer x22050080: Len x10000
0xA8 A3 2D 22 81 F0 78 7D 1C 82 E0 75 B5 E7 43 12
0xC0 23 BD EE 5E C5 1E 3D 4A EE 35 48 EE 38 B2 3A
0xC6 AD D1 9F B9 AA DD 5B 79 9F 6D 04 CA 47 22 68

2:37:41 PM #27 CDR -1064 File Writer.cpp, Line 299
Invalid block address
D: LITE-ON DVDRW LH-20A1S

2:37:42 PM #28 Text 0 File DVDR.cpp, Line 3434
EndDAO: Last written address was 31

2:37:42 PM #29 Phase 133 File dlgbrnst.cpp, Line 1746
Writing short lead-out

2:38:38 PM #30 SPTI -1093 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x06
Sense Qual: 0x00
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 06
Buffer x061e3f80: Len x20

2:38:38 PM #31 CDR -1093 File WriterStatus.cpp, Line 162
No seek complete
D: LITE-ON DVDRW LH-20A1S

2:38:38 PM #32 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once

2:38:39 PM #33 Phase 38 File dlgbrnst.cpp, Line 1746
Burn process failed at 16x (22,160 KB/s)

2:38:39 PM #34 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

2:38:45 PM #35 Text 0 File Cdrdrv.cpp, Line 10467
DriveLocker: UnLockVolume completed

2:38:45 PM #36 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:
File ‘Drivers\InCDfs.SYS’: Ver=5, 5, 3, 7, size=118952 bytes, created 5/6/2008 11:55:34 AM (InCD4 driver for win NT/2K/XP)


#2

Here’s a few things, but I am not saying these are all, because I am not all that familiar with Nero7 logs.

First thing I would do unless you really need it is get rid of InCD. You could probably find the Nero clean tool from their site.

The second is, updating your version of Nero7, download to your PC & install, (do not touch InCD).

Media widely recommended around here & most other places would be Verbatim or Taiyo Yuden. General rule of thumb for burning would be half the rated speed of the blank media, (16x burn at 8X etc). If you wish to take Nero out of the equation, you could use ImgBurn & if that fails, post that error log.

http://www.imgburn.com/


#3

nebulius

Can you burn something that you burned before that worked ? Or are you trying something different here that’s not working ?

get rid of incd ( headache,headache ) use there tool to get rid of it it’s the only way to be sure it’s all gone.It will haunt you.

Try imageburn it’s free so a good way to test if it’s the software.
Let us know what happens.

happy burning

bean55


#4

Tried Image Burn, no luck, got half way through then stopped. However, I was able to burn data cd, so I am pretty sure has something to do with software or drivers. I updated all my software, chipset drivers. I downloaded adaptec aspi checker and it said I had no working aspi. I am not sure if it only checks adaptec aspi or all aspi but I checked my nero drivers and aspi is there. I installed adaptec aspi, and still no luck. I don’t know if this helps or not but sometimes it will start to burn then fail and sometimes fail before anything is written on dvd. I have tried other brand dvds too and still fail.
Thanks beef and bean for the comments, I appreciate the brainstorming, hopefully I will hit on something that works.


#5

[QUOTE=nebulius;2087599]Tried Image Burn, no luck, got half way through then stopped. However, I was able to burn data cd, so I am pretty sure has something to do with software or drivers. I updated all my software, chipset drivers. I downloaded adaptec aspi checker and it said I had no working aspi. I am not sure if it only checks adaptec aspi or all aspi but I checked my nero drivers and aspi is there. I installed adaptec aspi, and still no luck. I don’t know if this helps or not but sometimes it will start to burn then fail and sometimes fail before anything is written on dvd. I have tried other brand dvds too and still fail.
Thanks beef and bean for the comments, I appreciate the brainstorming, hopefully I will hit on something that works.[/QUOTE]

nebulius

Have you tried burning at a lower speed, showing 16x . A lot of us burn at half the rated speed so 16x disc at 8x, and so on.

Can you post that imageburn log ?

If you have been burning fine and have not loaded anything lately that would change the drivers then there is a good chance that is not the problem.

What are you trying to burn? Movie ? Data ?
Did you get a bad Disc?

Really need more info to help.

bean55


#6

PRINCO - RGM1
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)

As recommended by others, try better media, although you’ve,

“had several successful burns with the same brand DVDs but now it doesn’t work.”


#7

[B]Disc Manufacturer: PRINCO - RGM1[/B]
try a Foldgers coffee can lid, it would probably work better.:bigsmile: