Burned dvd's are freezing in playback on my standalone dvd player

Hi.
My name is Neill, I found this website because I’m searching for a fix for
a burning prob I have.
I have a Toshiba SD-R5112 dvd-rw.All was fine burning wise (cd-rw and dvd-rw).The tray got stuck out one nite, the store replaced the drive, but now burned dvd’s are freezing in playback on my standalone dvd player and I’m unable to burn any files or music to the TDK cdrw700!! Getting ‘invalid write state’ and ‘cannot perform end track’.

Sorry for the long post but I’m confused why it wont burn to the media
that it had previously no issue with.

Thanks a mill for any ideas on this, and apologies if it has been covered b4.

Neill

Hi.

This is a one of the error logs i got back.

1A23-0015-6030-1822-4225-6667
1A25-4706-7030-1366-1263-4647

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead
ero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 19:18:06
Nero version: 6.3.0.4
Recorder: <TOSHIBA DVD-ROM SD-R5112>Version: 1031 - HA 1 TA 0 - 6.3.0.4
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <H + H DVD-ROM DVD-41SD>Version: 4.10 - HA 2 TA 0 - 6.3.0.4
Adapter driver: <vcsmpdrv> HA 2

=== Scsi-Device-Map ===
DiskPeripheral : ST3160022A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-R5112 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : H + H DVD-ROM DVD-41SD4.10 vcsmpdrv Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
TOSHIBA DVD-ROM SD-R5112 D: CDRom0
H + H DVD-ROM DVD-41SD CDRom1
IDE-DVD ROM 16x E: CDRom2

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 649MB (665168kB)
Memory in use : 36 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

1.6.2004
CD-ROM (MP3)
18:29:23 #1 Text 0 File Isodoc.cpp, Line 6029
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

18:29:23 #2 Phase 90 File dlgbrnst.cpp, Line 1802
Buffer Underrun Protection activated

18:29:23 #3 Text 0 File Reader.cpp, Line 118
Reader running

18:29:23 #4 Text 0 File Writer.cpp, Line 124
Writer TOSHIBA DVD-ROM SD-R5112 running

18:29:23 #5 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

18:29:23 #6 Text 0 File Burncd.cpp, Line 3101
Turn on Track-at-once, using CD-R/RW media

18:29:23 #7 Text 0 File DlgWaitCD.cpp, Line 241
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 251113 ( 55:50.13)

18:29:23 #8 Text 0 File DlgWaitCD.cpp, Line 246
Write in overburning mode: FALSE

18:29:23 #9 Text 0 File DlgWaitCD.cpp, Line 2100
Recorder: TOSHIBA DVD-ROM SD-R5112;
CDRW code: 00 97 10 00; CD manufacturer unknown
ATIP Data:
Special Info [hex] 1: D1 00 C6, 2: 61 0A 00 (LI 97:10.00), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 02 4A B0, 2: 5C C6 26, 3: 00 00 00 (invalid)

18:29:23 #10 Text 0 File DlgWaitCD.cpp, Line 407
>>> Protocol of DlgWaitCD activities: <<<
=========================================

18:29:23 #11 Text 0 File ThreadedTransferInterface.cpp, Line 780
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 251114 (251114) = #251114/55:48.14
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 251112 blocks [TOSHIBA DVD-ROM SD-R5112]
--------------------------------------------------------------

18:29:23 #12 Text 0 File ThreadedTransferInterface.cpp, Line 949
Prepare recorder [TOSHIBA DVD-ROM SD-R5112] for write in TAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 514588672, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
251114 | lead-out | 1 | 0x00 | 0x41

18:29:23 #13 Text 0 File ThreadedTransferInterface.cpp, Line 995
Removed 2 run-out blocks from end of track 1. Length: 251114 -> 251112.

18:29:23 #14 Phase 24 File dlgbrnst.cpp, Line 1802
Caching of files started

18:29:23 #15 Text 0 File Burncd.cpp, Line 4078
Cache writing successful.

18:29:23 #16 Phase 25 File dlgbrnst.cpp, Line 1802
Caching of files completed

18:29:23 #17 Phase 28 File dlgbrnst.cpp, Line 1802
Speed measurement started

18:29:23 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2265
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

18:29:27 #19 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

18:29:27 #20 Text 0 File dlgbrnst.cpp, Line 1660
Set remaining time: 0:00,000 (0ms) -> OK

18:29:27 #21 Phase 29 File dlgbrnst.cpp, Line 1753
Speed measurement completed: 1133.4x (170,016 KB/s)

18:29:27 #22 Phase 36 File dlgbrnst.cpp, Line 1802
Burn process started at 4x (600 KB/s)

18:29:27 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2265
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

18:29:27 #24 Text 0 File Mmc.cpp, Line 19611
Set BUFE: supported -> ON

18:29:30 #25 SCSI -1135 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x046C0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

18:29:30 #26 CDR -1135 File Writer.cpp, Line 301
Write error

18:29:30 #27 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

18:29:30 #28 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

18:29:30 #29 CDR -201 File WriterStatus.cpp, Line 196
Invalid write state
TOSHIBA DVD-ROM SD-R5112\H1 T0

18:29:30 #30 TRANSFER -18 File WriterStatus.cpp, Line 196
Could not perform EndTrack

18:29:30 #31 Text 0 File Mmc.cpp, Line 14474
<TOSHIBA DVD-ROM SD-R5112> start Close Session

18:29:30 #32 SCSI -1023 File Cdrdrv.cpp, Line 1175
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00

18:29:30 #33 CDR -1023 File WriterStatus.cpp, Line 245
Command sequence error

18:29:30 #34 TRANSFER -19 File WriterStatus.cpp, Line 245
Could not perform Fixation

18:29:30 #35 Text 0 File WriterStatus.cpp, Line 254
falling back to disc fixation

18:29:30 #36 Text 0 File dlgbrnst.cpp, Line 1660
Set remaining time: 0:00,000 (0ms) -> OK

18:29:30 #37 Phase 38 File dlgbrnst.cpp, Line 1802
Burn process failed at 4x (600 KB/s)

Existing drivers:
File ‘Drivers\ADPU160M.SYS’: Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 14:07:32
File ‘Drivers\PXHELP20.SYS’: Ver=2.02.47a, size=17136 bytes, created 03/01/2003 02:02:00 (Prassi/Veritas driver for win 2K)
File ‘Drivers\atapi.sys’: Ver=5.1.2600.1133 (xpsp2.020921-0842), size=87040 bytes, created 16/10/2002 17:31:10 (Adapter driver for rec)
File ‘Drivers\vcsmpdrv.sys’: Ver=4.3.0.2, size=49232 bytes, created 07/06/2002 12:38:40 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

I may be wrong but it looks like you have bad media or your new dvd burner may be faulty/more sensitive than your old one.
//Danne