Burn successful but verification fails

vbimport

#1

my config;
Processor: AMD Phenom X4 9650
Memory: 4096 MB DDR2
Graphics :NVIDIA GeForce GTX 560
Motherboard : ASUS M3A78-EM Rev. X.0x
Disc :Seagate ST3500418AS 500 GB SATA II
Windows : Windows 7 Ultimate 64-bit
DVD : LG DVDRAM GH22NS50

i normally buy verbatim (MCC.03…RG20) discs and haven’t got a single disc burning/verification failure .but after verbatims are out of stock,i bought moser baer discs (sterling .MBI.01…RG40.) .but every single disks of moser baer failed to write correctly . wasted almost 25-30 discs .they throw up errors like burn fail/verification fail/ etc.like this

14:14:30 #29 SPTI -1119 File SCSIPassThrough.cpp, Line 224
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1119)
CDB Data: 0x2A 00 00 18 52 00 00 00 20 00 00 00
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x03
Sense Area: 0x70 00 04 00 00 00 00 0A 32 34 04 0C 09 03
Buffer x0e423740: Len x10000
0x61 BF 46 EE 4D ED 70 E6 2C F0 29 95 58 E8 BE FE
0xFC 75 5B BA 98 C9 79 7E FF D3 EA A2 98 CF FC 06
0x59 D4 C6 3D 2F 58 E6 B4 B1 9F 0F 4B D5 67 D5 7F

14:14:30 #30 TRANSFER -20 File ThreadedTransfer.cpp, Line 1222
Could not perform Write

14:14:30 #31 CDR -1119 File Writer.cpp, Line 339
Track following error

it’s the recent log .when i manually try to read files somes are readable (max 2gb files are readable) and rest are unreadable.so i thought it was media problem and bought amkette dvd discs (.MCC.03…RG20.) to try on.but they are too failing and shows "burn successfully but verification fails due to too much error ".

here is a part of log ;
14:11:12 #95 SPTI -1128 File SCSIPassThrough.cpp, Line 224
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
CDB Data: 0x28 00 00 0D 2C 10 00 00 10 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
Sense Area: 0xF0 00 03 00 0D 2C 10 0A 00 00 03 0C 11
Buffer x0c3a1980: Len x8000

14:11:12 #96 SectorVerify 20 File Cdrdrv.cpp, Line 12057
Read errors from sector 863248 to 863263

14:11:23 #97 SPTI -1128 File SCSIPassThrough.cpp, Line 224
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
CDB Data: 0x28 00 00 0D 2C 40 00 00 10 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
Sense Area: 0xF0 00 03 00 0D 2C 40 0A 00 00 03 0C 11
Buffer x0c3a1980: Len x8000

14:11:23 #98 SectorVerify 20 File Cdrdrv.cpp, Line 12057
Read errors from sector 863296 to 863311

14:11:39 #99 SPTI -1128 File SCSIPassThrough.cpp, Line 224
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
CDB Data: 0x28 00 00 0D 2D 50 00 00 10 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
Sense Area: 0xF0 00 03 00 0D 2D 50 0A 00 00 03 0C 11
Buffer x0c3a1980: Len x8000

14:11:39 #100 SectorVerify 20 File Cdrdrv.cpp, Line 12057
Read errors from sector 863568 to 863583

14:12:02 #101 SPTI -1128 File SCSIPassThrough.cpp, Line 224
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
CDB Data: 0x28 00 00 0D 2E 30 00 00 10 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
Sense Area: 0xF0 00 03 00 0D 2E 30 0A 00 00 03 0C 11
Buffer x0c3a1980: Len x8000

14:12:02 #102 CDR -1222 File Writer.cpp, Line 213
Verification aborted, too many errors
M: HL-DT-ST DVDRAM GH22NS50

also used to write on verbatim DVD-RW after cleaning the lens by opening the case but still have the problem.

I/O Error!

Device: [0:1:0] HL-DT-ST DVDRAM GH22NS50 TN03 (M
ScsiStatus: 0x02
Interpretation: Check Condition
CDB: 2A 00 00 16 29 A0 00 00 10 00
Interpretation: Write (10) - Sectors: 1452448 - 1452463
Sense Area: 70 00 03 00 00 00 00 0A 3C 30 00 0F 02 00 00 00 00 00
Interpretation: No Seek Complete

do i have to change the drive?