>>Burn problem and speed question <<

vbimport

#1

Well, first, i keep getting this beautiful log when i try burning a data cd:

Windows 98 4.10
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=1, 0, 0, 0, size=36864 bytes, created 05/05/99 22:22:00
ahead WinASPI: File ‘C:\AHEAD\NERO\Wnaspi32.dll’: Ver=4.60 (1017), size=48128 bytes, created 12/11/98 13:06:00
Nero version: 6.6.0.3 (Nero Express)
Recorder: <HL-DT-ST CD-RW GCE-8526B>Version: 1.02 - HA 0 TA 1 - 6.6.0.3
Adapter driver: <ESDI_506> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <CREATIVE CD5r3sE >Version: 1n0p - HA 1 TA 1 - 6.6.0.3 Adapter driver: <ESDI_506> HA 1 HL-DT-ST CD-RW GCE-8526B (Target 1, D: Autoinsert On, DMA Off, Disconnect ?, SyncDataXfer ? CREATIVE CD5r3sE (Target 1, E: Autoinsert On, DMA Off, Disconnect ?, SyncDataXfer ?
NERO IMAGEDRIVE2 (Target 0, F: Autoinsert On, DMA ?, Disconnect ?, SyncDataXfer ?
Excluded drive IDs:
WriteBufferSize: 24117248 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 127MB (130452kB)
Free physical memory: 2MB (2652kB)
Memory in use : 100 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

30.12.2004
CD-ROM (ISO)
21:35:50 #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Continue multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

21:35:51 #2 Text 0 File Burncd.cpp, Line 2866
HL-DT-ST CD-RW GCE-8526B
Buffer underrun protection activated

21:35:51 #3 Text 0 File Reader.cpp, Line 127
Reader running

21:35:51 #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

21:35:52 #5 Text 0 File Burncd.cpp, Line 3151
Turn on Track-at-once, using CD-R/RW media

21:35:58 #6 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 284090 ( 63:09.65)
Last address to be written: 215406 ( 47:54.06)

21:35:58 #7 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)

21:35:58 #8 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: HL-DT-ST CD-RW GCE-8526B;
CDRW code: 00 97 27 00; OSJ entry from: DIGITAL STORAGE TECHNOLOGY CO.,LTD
ATIP Data:
Special Info [hex] 1: B3 00 CE, 2: 61 1B 00 (LI 97:27.00), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 24 1A D8, 2: 26 B2 4A, 3: 00 80 80 (invalid)

21:35:58 #9 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

21:35:58 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 215407 (215407) = #215407/47:52.7
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 215405 blocks [HL-DT-ST CD-RW GCE-8526B]
--------------------------------------------------------------

21:35:58 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [HL-DT-ST CD-RW GCE-8526B] for write in TAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc not fixated
Tracks 5 to 5:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 441460736, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 5 | 0 | 0x41 | 0x00
0 | 5 | 1 | 0x41 | 0x00
215407 | lead-out | 1 | 0x41 | 0x00

21:35:58 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1105
Removed 2 run-out blocks from end of track 5. Length: 215407 -> 215405.

21:35:58 #13 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

21:35:58 #14 CDR -1066 File ThreadedTransferInterface.cpp, Line 2425
Invalid field in command

21:35:58 #15 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.

21:35:58 #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

21:35:58 #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 12x (1.800 KB/s)

21:35:58 #18 CDR -1066 File ThreadedTransferInterface.cpp, Line 2425
Invalid field in command
HL-DT-ST CD-RW GCE-8526B\H0 T1

21:35:58 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2578
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): no unique disc position

21:35:58 #20 TRANSFER -34 File ThreadedTransferInterface.cpp, Line 2579
Cannot write compilation to selected recorders simultaneously

21:35:58 #21 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 12x (1.800 KB/s)

Existing drivers:
File ‘IoSubSys\SCSI1HLP.VXD’: Ver=4.10.1998, size=19270 bytes, created 05/05/99 22:22:00
File ‘IoSubsys\NEROCD95.VXD’: Ver=4.5.0.14, size=39882 bytes, created 11/03/02 10:55:38
File ‘IoSubsys\CDFS.VXD’: Ver=4.10.1998, size=59133 bytes, created 05/05/99 22:22:00
File ‘IoSubsys\ESDI_506.PDR’: Ver=4.10.2222, size=24406 bytes, created 05/05/99 22:22:00
File ‘…\System\Vmm32\Ios.vxd’: Ver=4.10.2222, size=69574 bytes, created 05/05/99 22:22:00
File ‘IoSubsys\Disktsd.vxd’: Ver=4.10.2222, size=18809 bytes, created 05/05/99 22:22:00
File ‘IoSubsys\ESDI_506.PDR’: Ver=4.10.2222, size=24406 bytes, created 05/05/99 22:22:00 (Adapter driver for rec)

Registry Keys:

So, this “Cannot write compilation to selected recorders simultaneously” is the problem.

As it’s shown i’ve got a reader on E: and the recorder on D:, also a virtual drive as F:.

I’d reaaaaaaaaally apreciate some help here! :slight_smile:

And, once, before i installed this version of nero, i burned a vcd with videos and images and it took 2 hours to analyze the data and another 4 to burn!
Is this normal?

THANK YOU ALL!


#2

@ Rockqueen_x
Welcome:).
I would suggest enabling your DMA

HL-DT-ST CD-RW GCE-8526B (Target 1, D: Autoinsert On, DMA Off, Disconnect ?, SyncDataXfer ?
CREATIVE CD5r3sE ` (Target 1, E: Autoinsert On, DMA Off, Disconnect ?, SyncDataXfer ?
Then I would consider getting more memory, and until then, I would suggest doing nothing on your system, close all open programs and no surfing during a burn or rip and defrag your HDD
Physical memory : 127MB (130452kB)
Free physical memory: 2MB (2652kB)
Memory in use : 100 %


#3

Welcome Rockqueen_X. :wink: :bigsmile:

You’ve got two different burners and they maybe use different burn strategies (P-CAV,Full CAV, ZLV) … this could also be a problem.

First turn on DMA as please suggested.
Defragment your HD (just in case), and after that let Nero test the tranfer speed of your HD.

Because of your small amount off memory you can also use virtual memory in Nero (don’t know if this is the right expression, haven’t used Nero for a while and I’m not at home), set this at max.

Try to burn again … but don’t do anything during burning (no internet other progs, etc).

Let us know how it went.

Btw, does it have to be a multi-session CD?

Otherwise try finalize CD and DAO.