Burn failure using DVDFab V6

I downloaded and installed DVDFab 6.0.2.0 to evaluate before purchasing.

After reading through the forum I found similar errors with DVDFab (I was receiving error 122)
and tried using the ImgBurn engine instead of the VSO Burning Engine.

I setup ImgBurn based on a tutorial I found on the forum.

I am unable to burn my copy, here is the log file from ImgBurn

I do not know how to correct this issue, it seems there is an access issue and ImgBurn is getting Access is denied errors.

I 01:57:17 ImgBurn Version 2.4.4.0 started!
I 01:57:17 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2)
I 01:57:17 Total Physical Memory: 2,030,056 KB - Available: 1,182,204 KB
W 01:57:17 Drive D:\ (FAT32) does not support single files > 4 GB in size.
I 01:57:17 Initialising SPTI…
I 01:57:17 Searching for SCSI / ATAPI devices…
I 01:57:17 Found 1 DVD-ROM, 1 DVD±RW and 1 BD-ROM/HD DVD-ROM!
I 01:57:17 Operation Started!
I 01:57:17 Building Image Tree…
I 01:57:17 Checking Directory Depth…
I 01:57:17 Calculating Totals…
I 01:57:17 Preparing Image…
I 01:57:17 Checking Path Length…
I 01:57:17 Contents: 11 Files, 2 Folders
I 01:57:17 Content Type: DVD Video
I 01:57:17 File System(s): ISO9660, UDF (1.02)
I 01:57:17 Volume Label: THE_SAINT_DISC_1
I 01:57:17 IFO/BUP 32K Padding: Enabled
I 01:57:18 Region Code: 1, 2, 3, 4, 5, 6, 7, 8
I 01:57:18 TV System: NTSC
I 01:57:18 Size: 4,693,608,448 bytes
I 01:57:18 Sectors: 2,291,801
I 01:57:18 Image Size: 4,694,212,608 bytes
I 01:57:18 Image Sectors: 2,292,096
I 01:57:18 Operation Successfully Completed! - Duration: 00:00:00
I 01:57:18 Operation Started!
I 01:57:18 Source File: -==//[BUILD IMAGE]/==-
I 01:57:18 Source File Sectors: 2,292,096 (MODE1/2048)
I 01:57:18 Source File Size: 4,694,212,608 bytes
I 01:57:18 Source File Volume Identifier: THE_SAINT_DISC_1
I 01:57:18 Source File Application Identifier: IMGBURN V2.4.4.0 - THE ULTIMATE IMAGE BURNER!
I 01:57:18 Source File Implementation Identifier: ImgBurn
I 01:57:18 Source File File System(s): ISO9660, UDF (1.02)
I 01:57:18 Destination Device: [2:0:0] TSSTcorp CD/DVDW TS-H552L 0614 (E:) (ATA)
I 01:57:18 Destination Media Type: DVD-R (Disc ID: CMC MAG. AM3) (Speeds: 4x, 6x, 8x, 10x, 12x, 14x, 16x)
I 01:57:18 Destination Media Sectors: 2,298,496
I 01:57:18 Write Mode: DVD
I 01:57:18 Write Type: DAO
I 01:57:18 Write Speed: 8x
I 01:57:18 Link Size: Auto
I 01:57:18 Lock Volume: Yes
I 01:57:18 Test Mode: No
I 01:57:18 OPC: No
I 01:57:18 BURN-Proof: Enabled
W 01:57:22 DeviceIoControl(FSCTL_LOCK_VOLUME) Failed! - Reason: Access is denied.
W 01:57:22 DeviceIoControl(FSCTL_DISMOUNT_VOLUME) Failed! - Reason: Access is denied.

I 01:57:23 Filling Buffer… (40 MB)
I 01:57:24 Writing LeadIn…
I 01:57:45 Writing Session 1 of 1… (1 Track, LBA: 0 - 2292095)
I 01:57:45 Writing Track 1 of 1… (MODE1/2048, LBA: 0 - 2292095)
W 01:58:23 Failed to Write Sectors 2112 - 2143 - Reason: Write Error
W 01:58:23 Retrying (1 of 20)…
W 01:58:23 Retry Failed - Reason: Logical Block Address out of Range
W 01:58:23 Retrying (2 of 20)…
W 01:58:23 Retry Failed - Reason: Logical Block Address out of Range
W 01:58:23 Retrying (3 of 20)…
W 01:58:23 Retry Failed - Reason: Logical Block Address out of Range
W 01:58:23 Retrying (4 of 20)…
W 01:58:23 Retry Failed - Reason: Logical Block Address out of Range
W 01:58:23 Retrying (5 of 20)…
W 01:58:23 Retry Failed - Reason: Logical Block Address out of Range
W 01:58:23 Retrying (6 of 20)…
W 01:58:23 Retry Failed - Reason: Logical Block Address out of Range
W 01:58:23 Retrying (7 of 20)…
W 01:58:23 Retry Failed - Reason: Logical Block Address out of Range
W 01:58:23 Retrying (8 of 20)…
W 01:58:23 Retry Failed - Reason: Logical Block Address out of Range
W 01:58:23 Retrying (9 of 20)…
W 01:58:23 Retry Failed - Reason: Logical Block Address out of Range
W 01:58:23 Retrying (10 of 20)…
W 01:58:23 Retry Failed - Reason: Logical Block Address out of Range
W 01:58:23 Retrying (11 of 20)…
W 01:58:23 Retry Failed - Reason: Logical Block Address out of Range
W 01:58:23 Retrying (12 of 20)…
W 01:58:23 Retry Failed - Reason: Logical Block Address out of Range
W 01:58:23 Retrying (13 of 20)…
W 01:58:23 Retry Failed - Reason: Logical Block Address out of Range
W 01:58:23 Retrying (14 of 20)…
W 01:58:23 Retry Failed - Reason: Logical Block Address out of Range
W 01:58:23 Retrying (15 of 20)…
W 01:58:23 Retry Failed - Reason: Logical Block Address out of Range
W 01:58:23 Retrying (16 of 20)…
W 01:58:23 Retry Failed - Reason: Logical Block Address out of Range
W 01:58:23 Retrying (17 of 20)…
W 01:58:23 Retry Failed - Reason: Logical Block Address out of Range
W 01:58:23 Retrying (18 of 20)…
W 01:58:23 Retry Failed - Reason: Logical Block Address out of Range
W 01:58:23 Retrying (19 of 20)…
W 01:58:23 Retry Failed - Reason: Logical Block Address out of Range
W 01:58:23 Retrying (20 of 20)…
W 01:58:23 Retry Failed - Reason: Logical Block Address out of Range
E 01:58:39 Failed to Write Sectors 2112 - 2143 - Reason: Write Error
I 01:58:39 Synchronising Cache…
E 01:58:51 Failed to Write Image!
I 01:58:51 Exporting Graph Data…
I 01:58:51 Graph Data File: C:\Documents and Settings\HP_Administrator\Application Data\ImgBurn\Graph Data Files\TSSTcorp_CD-DVDW_TS-H552L_0614_THURSDAY-JUNE-25-2009_1-57_AM_CMC_MAG._AM3_8x.ibg
I 01:58:51 Export Successfully Completed!
E 01:58:51 Operation Failed! - Duration: 00:01:33
I 01:58:51 Average Write Rate: 79 KB/s (0.1x) - Maximum Write Rate: 520 KB/s (0.4x)

[QUOTE=MasterVillain;2297866]I downloaded and installed DVDFab 6.0.2.0 to evaluate before purchasing.

After reading through the forum I found similar errors with DVDFab (I was receiving error 122)
and tried using the ImgBurn engine instead of the VSO Burning Engine.

I setup ImgBurn based on a tutorial I found on the forum.

I am unable to burn my copy, here is the log file from ImgBurn

I do not know how to correct this issue, it seems there is an access issue and ImgBurn is getting Access is denied errors.[/QUOTE]

You seem to have two problems here…

1.) Something on your system (probably running in the background, such as a virus checker, malware checker, or maybe something Nero), has control of your drives and won’t release them to Imgburn - the Lock & Dismount errors - and even with those, Imgburn should still write the DVD OK…

2.) You are using crappy media (CMC MAG AM3) which is why you are getting the failed to write error. Suggest you obtain better media (Taiyo Yuden for S/L, Verbatim for D/L).

You’ll have to do some digging to find the drive conflict and resolve it.

OC

:slight_smile:

[QUOTE=MasterVillain;2297866]I 01:57:17 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2).[/QUOTE]

Upgrade to SP3 as you only have SP2 installed and I also get this message [B]W 01:57:22 DeviceIoControl(FSCTL_LOCK_VOLUME) Failed! - Reason: Access is denied [/B]when I burn with Imgburn but all my back ups work but then I use Taiyo Yuden blank media.

Now you say you used a tutorial found on the forum which tutorial as there is more than one. Here are the links to all 3 I know about
Read post #7 courtesy of StormJumper http://club.cdfreaks.com/f116/6-0-1-0-unable-verify-disc-after-burning-275143/#post2283364

Here is the link for the last one courtesy of troy512 read post #1 http://club.cdfreaks.com/f116/how-dvdfab-imgburn-auto-write-speeds-257756/

[QUOTE=GJ;2297972]Upgrade to SP3 as you only have SP2 installed and I also get this message [B]W 01:57:22 DeviceIoControl(FSCTL_LOCK_VOLUME) Failed! - Reason: Access is denied [/B]when I burn with Imgburn but all my back ups work but then I use Taiyo Yuden blank media.

Now you say you used a tutorial found on the forum which tutorial as there is more than one. Here are the links to all 3 I know about
Read post #7 courtesy of StormJumper http://club.cdfreaks.com/f116/6-0-1-0-unable-verify-disc-after-burning-275143/#post2283364

Here is the link for the last one courtesy of troy512 read post #1 http://club.cdfreaks.com/f116/how-dvdfab-imgburn-auto-write-speeds-257756/[/QUOTE]

I used both of these tutorials:

[QUOTE=OCanada;2297953]You seem to have two problems here…

1.) Something on your system (probably running in the background, such as a virus checker, malware checker, or maybe something Nero), has control of your drives and won’t release them to Imgburn - the Lock & Dismount errors - and even with those, Imgburn should still write the DVD OK…

2.) You are using crappy media (CMC MAG AM3) which is why you are getting the failed to write error. Suggest you obtain better media (Taiyo Yuden for S/L, Verbatim for D/L).

You’ll have to do some digging to find the drive conflict and resolve it.

OC

:)[/QUOTE]
Do what OC mentioned and update to SP3

Thank you for the help folks.

I just noticed the disk that I am trying to backup has a play time of 3Hrs 29Min and my Blank DVD’s (HP DVD-R 16x) have a 4.7GB 120Min recording length.

The original DVD contains 4 episodes of an old TV series The Saint (Roger Moore, 1962).

Would this cause the burn issue, I have had no problem “Burning” a copy to my HDD and playing it back?

Is there a way to just copy and burn 1 episode to test this?

[QUOTE=MasterVillain;2298399]Thank you for the help folks.

I just noticed the disk that I am trying to backup has a play time of 3Hrs 29Min and my Blank DVD’s (HP DVD-R 16x) have a 4.7GB 120Min recording length.

The original DVD contains 4 episodes of an old TV series The Saint (Roger Moore, 1962).

Would this cause the burn issue, I have had no problem “Burning” a copy to my HDD and playing it back?

Is there a way to just copy and burn 1 episode to test this?[/QUOTE]

A DVD with 3.5 hrs. of video on it (as in The Saint) can be copied to a DVD+R/-R (single layer) if the box near the bottom of the main page (DVD to DVD > Full Disc) is set to DVD 5. If, on the other hand, it is set to DVD 9, then you’ll need a dual layer disc to do the write. (it all has to do with file size, and not the running time of the episodes or the source disc).

The files that go on your HDD during the rip process aren’t “burned” in the same sense that a blank DVD is…your system merely does a file write, the same as it might to a floppy or external memory device, if such were attached to your system, and had sufficient space for the files.

Your HP discs, which you are using for the burn, and, are the previously mentioned ‘crappy’ ones, should be replaced with better ones for video work. That is the cause of your burn issue.

Yes, you can do a test burn…just select ‘Main Movie’, and after Fab opens the disc, just select one of the titles offered, along with its corresponding sound-track, and, if desired, any subtitle streams. (although it won’t prove much, as even a crappy group of blanks will give you the occasional successful copy).

Please keep us in the loop.

OC

:slight_smile:

Thank you for your help.

I am going to order the better quality media Taiyo Yuden or Verbatim.

I am also considering getting an external CD/DVD R/W drive as I have read that the TSSTcorp CD/DVDW TS-H552L 0614 (ATA) drive is known to have issues burning video DVDs.

I want to create backups of DVD movies/shows that will also play in standard regular players.

My 2 great nephews (8 & 9) have portable dvd players and I want to backup their movies. They take pretty good care of their disks but every now and then one will get damaged and unplayable.

What is a good quality external (USB) CD/DVD R/W drive, and should I buy SL or DL media?

I originally bought the HP media for data/system backup plus they are lightscribe capable disks and I have had no problems with that aspect.

[QUOTE=MasterVillain;2298524]Thank you for your help.

I am going to order the better quality media Taiyo Yuden or Verbatim.

I am also considering getting an external CD/DVD R/W drive as I have read that the TSSTcorp CD/DVDW TS-H552L 0614 (ATA) drive is known to have issues burning video DVDs.

I want to create backups of DVD movies/shows that will also play in standard regular players.

My 2 great nephews (8 & 9) have portable dvd players and I want to backup their movies. They take pretty good care of their disks but every now and then one will get damaged and unplayable.

What is a good quality external (USB) CD/DVD R/W drive, and should I buy SL or DL media?

I originally bought the HP media for data/system backup plus they are lightscribe capable disks and I have had no problems with that aspect.[/QUOTE]
For those portable DVD players find out if they play DVD-R or DVD+R media as some do not play them.

Now I have an LG GSA-E10L external and I have no problems using that with the programs I have and LG DVD drives are good readers and fairly decent burnrs also.

Now as for getting DL or SL media it all up to you if you want to compress the movie to fit onto a SL disc or if you not want to compress.
DL media costs a lot more and the only DL media recomended is verbatim DVD+R made in Singapore

SL media is verbatim or Taiyo Yuden blank media

[QUOTE=GJ;2298527]For those portable DVD players find out if they play DVD-R or DVD+R media as some do not play them.

Now I have an LG GSA-E10L external and I have no problems using that with the programs I have and LG DVD drives are good readers and fairly decent burnrs also.

Now as for getting DL or SL media it all up to you if you want to compress the movie to fit onto a SL disc or if you not want to compress.
DL media costs a lot more and the only DL media recomended is verbatim DVD+R made in Singapore

SL media is verbatim or Taiyo Yuden blank media[/QUOTE]

My nephew burned a backup DVD using DVD-R and it played fine in the portable players.

Unfortunately LG GSA-E10L has been discontinued so after some searching I am considering one of the following:

LG Electronics GP08LU10 8X Slim LightScribe DVD+/-RW External Drive
Toshiba PA3761U-1DV2 Portable/Slim USB SuperMulti DVD-Writer
Pioneer Electronics DVR-X162Q6PK Qflix Ext DVD/cd Writer
Samsung SE-S184 18x External DVD±RW DL Drive

How can I determine if the Verbatim disks are made in Singapore, I am disabled so need to order products online?