Black Hawk Down

vbimport

#1

How do I burn BHD with blind write? Thanks


#2

See here.


#3

Thanks!


#4

I tried to do what the readme said step by step and when it came time to write the cd my cd burner just kept unloading the cd never even tried the burn it. The buffer went up to about 70% then out popped the cd.


#5

Originally posted by 2feathers
I tried to do what the readme said step by step and when it came time to write the cd my cd burner just kept unloading the cd never even tried the burn it. The buffer went up to about 70% then out popped the cd.

Could be many things …

Bet is; it’s your settings of the drives in Windows. I’m sure an expert will reply to this shortly. I’d try to help, I seem to be able to stumble around and fix my stuff but I’m not book smart in this area and it’s hard for me to explain where and what to do. I’m sure one of the many experts will reply soon to steer you in the right direction.


#6

Thanks for the info This is the report that I get after it ejects the CD

Microsoft Windows XP Professional (Build 2600)
Patin-couffin version 13 in use
Blindwrite Version 4.5.6.87
----- CD DEVICE INFO START OF REPORT -----
Cd Unit report started at 9/3/2003 6:53:12 PM

VendorID : “LG”
UnitId : “CD-RW CED-8080”
FwID : “”
FwDate : “1.09”
Drivers : 00000000/00000000/0000000000000014
Speeds : 32/8/4/0
Bsize : 2048
Flags : 00000

end of CD Unit report
----- CD DEVICE INFO END OF REPORT -----
Unit 1:0:0 - LG CD-RW CED-8080B 1.06 [E] (Ide)
Speed x4
VolumeId : “DFBHD”
Hash : EFC793742ED262FA7D9A1D82F4B2BD397C39759A
HD image “DFBHD.BWT”
Physical media informations (BWA) found.
BWA support by Autoplay is used (Autoplay driver is required)
Writing mode : DAO PW
MMC Write error reported at sector -11741 : Code 05 24 00 [Illegal request, Invalid field in CDB]
Sectors read : 13129
Sectors built: 0
CD is incomplete
Microsoft Windows XP Professional (Build 2600)
Patin-couffin version 13 in use
Blindwrite Version 4.5.6.87
----- CD DEVICE INFO START OF REPORT -----
Cd Unit report started at 9/3/2003 6:54:54 PM

VendorID : “LG”
UnitId : “CD-RW CED-8080”
FwID : “”
FwDate : “1.09”
Drivers : 00000000/00000000/0000000000000014
Speeds : 32/8/4/0
Bsize : 2048
Flags : 00000

end of CD Unit report
----- CD DEVICE INFO END OF REPORT -----
Unit 1:0:0 - LG CD-RW CED-8080B 1.06 [E] (Ide)
Speed x4
VolumeId : “DFBHD”
Hash : EFC793742ED262FA7D9A1D82F4B2BD397C39759A
HD image “DFBHD.BWT”
Physical media informations (BWA) found.
BWA support by Autoplay is used (Autoplay driver is required)
Writing mode : DAO PW
MMC Write error reported at sector -11741 : Code 05 24 00 [Illegal request, Invalid field in CDB]
Sectors read : 0
Sectors built: 0
CD is incomplete


#7

i have that error before …usually it was writer …I had to upgrade firmware and then i tried different writing mode and it didnt happen …i would try to reinstall blindwrite to earlier version 4.5.4 would be good to see if it does same error … i have blindwrite and done backups of it all the time time …

msn messenger

giovanni40220@msn.com

also what burner software you have on ? roxio ? also is your burner set to overburn ??


#8

I am using Roxio and I dont know how to check if burner is set to overburn. Thanks for your help


#9

just for kicks …I had roxio and had problems …ya might have ot unistall roxio and try it …


#10

LOL were are back and forth thanks again for you help. I tried it on my laptop and it doesn’t have any burning software on it and I get the same error. Both computer’s have xp


#11

sorry I been gone for a bit ’

2feathers …

did you get it working ? also change media your using there bud …I just looked log and have friend too …I would change brand of cd’s you use and also try SAO Cooked

also check your image …

can you post your verify screen for your image up ?

msn messenger

giovanni40220@msn.com