BenQ 1680/1800 QSuite problem

vbimport

#1

Does anyone have encountered this problem on Qsuite with DW 1680/1800?

I just burned 3 RiTEK R03, and Qsuite showed 3 RiTEK R03 strategy on SolidBurn list

Is this normal?


#2

DemiDevil, you are not alone… :wink:
There for sure are some severe compatibility issues regarding the “new” Litey BenQ’s and QSuite.
I have my suspicions why but would rather not speculate any further at this stage. :smiley:

Adding another example;

  • Code_1 TraceSPTI output related to pic1.
  • Code_2 TraceSPTI output related to pic2.
  • Pic_1, QSuite output at start after backflash from LH-18A1P.
  • Pic_2 QSuite output after “Clean” eeprom.
  • Go figure-
[B]BEFORE "CLEAN" eeprom[/B]
-----------------------------------------------------------------------------
DeviceIoControl    : \Device\CdRom2
Command            : IOCTL_SCSI_PASS_THROUGH_DIRECT
Length             : 44 (0x002C)
ScsiStatus         : 0
PathId             : 0
TargedId           : 0
Lun                : 0
CdbLength          : 12 (0x0C)
SenseInfoLength    : 32 (0x20)
DataTransferLength : 255 (0x000000FF)
DataIn             : 1
TimeOutValue       : 15

CDB:
00000000  FD 1B 42 45 4E 51 0E 00 FF 00 00 00               ý.BENQ..ÿ...    

DeviceIoControl Result: True

CdbLength          : 12 (0x0C)
SenseInfoLength    : 0 (0x00)
DataTransferLength : 255 (0x000000FF)

CDB:
00000000  FD 1B 42 45 4E 51 0E 00 FF 00 00 00               ý.BENQ..ÿ...    

Data Received:
00000000  42 45 4E 51 00 00 0E 05 02 03 05 06 07 00 00 00   BENQ............
00000010  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
00000020  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
00000030  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
00000040  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
00000050  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
00000060  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
00000070  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
00000080  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
00000090  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
000000A0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
000000B0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
000000C0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
000000D0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
000000E0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
000000F0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00      ............... 
-----------------------------------------------------------------------------.
[B]AFTER "CLEAN" eeprom[/B]
-----------------------------------------------------------------------------
DeviceIoControl    : \Device\CdRom2
Command            : IOCTL_SCSI_PASS_THROUGH_DIRECT
Length             : 44 (0x002C)
ScsiStatus         : 0
PathId             : 0
TargedId           : 0
Lun                : 0
CdbLength          : 12 (0x0C)
SenseInfoLength    : 32 (0x20)
DataTransferLength : 255 (0x000000FF)
DataIn             : 1
TimeOutValue       : 200

CDB:
00000000  FD 1B 42 45 4E 51 16 07 00 00 00 00               ý.BENQ......    

DeviceIoControl Result: True

CdbLength          : 12 (0x0C)
SenseInfoLength    : 0 (0x00)
DataTransferLength : 255 (0x000000FF)

CDB:
00000000  FD 1B 42 45 4E 51 16 07 00 00 00 00               ý.BENQ......    

Data Received:
00000000  42 45 4E 51 00 16 07 3C FF FF FF FF FF FF FF FF   BENQ...<ÿÿÿÿÿÿÿÿ
00000010  FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF   ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
00000020  FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF   ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
00000030  FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF   ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
00000040  FF FF FF FF 00 00 00 00 00 00 00 00 00 00 00 00   ÿÿÿÿ............
00000050  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
00000060  00 00 00 00 0C D4 12 00 A3 B4 E7 77 00 00 00 00   .....Ô..£´çw....
00000070  00 00 00 C0 03 00 00 00 00 00 00 00 03 00 00 00   ...À............
00000080  00 00 00 00 00 00 00 00 74 F7 12 00 84 57 40 00   ........t÷..„W@.
00000090  60 D4 12 00 00 00 00 C0 03 00 00 00 00 00 00 00   `Ô.....À........
000000A0  03 00 00 00 00 00 00 00 00 00 00 00 74 F7 12 00   ............t÷..
000000B0  64 F6 12 00 20 D5 12 00 00 00 00 00 7C 55 40 00   dö.. Õ......|U@.
000000C0  00 00 00 00 12 00 00 00 38 00 00 00 00 00 00 00   ........8.......
000000D0  7A 3A 00 00 28 0A 00 00 02 00 00 00 5C 5C 2E 5C   z:..(.......\\.\
000000E0  7A 3A 00 20 50 61 63 6B 20 31 00 73 62 01 02 00   z:. Pack 1.sb...
000000F0  AC D4 12 00 34 F7 12 00 BC A0 40 00 AC D4 12      ¬Ô..4÷..¼ @.¬Ô. 
-----------------------------------------------------------------------------




#3

Thanks Pinto, now I know that 'm not the only one :smiley:

So I would think that SolidBurn could only learn 6 times and then we should clean the learned strategy if we want to make solidburn work after 6 burns :slight_smile: