Benq 1620 (b7t9) burns MCC004 only at 8x

on the box is written: Made in Taiwan


                            Media Information                            
Region information                                    N/A not a DVD-VIDEO
Media code/Manufacturer ID                                    MCC     004
Media Product Revision Number                                         00h
Format Capacity                                                Blank Disc
Free Blocks                                                     405405696
Free Capacity                                              4.38GB(4.70GB)
Book Type                                                           DVD+R
Media Type                                                          DVD+R
Manufacturer Rated Speed                                   16.0x 22160KBp
Available Write Descriptor                           CLV 16.0x  22160KBps
Available Write Descriptor                           CLV 12.0x  16620KBps
Available Write Descriptor                           CLV  8.0x  11080KBps
Available Write Descriptor                           CLV  4.0x   5540KBps
Available Write Descriptor                           CLV  2.4x   3324KBps
Linear Density                                                 Blank Disc
Track Density                                                     Unknown
Number of Layers                                                        1
                                                                         
                           Complete Media Code                           
00000000 01 02 00 00 A1 0F 02 00 00 03 00 00 00 26 05 3F .............&.?
00000010 00 00 00 00 00 00 07 4D 43 43 00 00 00 00 00 30 .......MCC.....0
00000020 30 34 00 38 23 54 37 12 02 54 6C 02 92 5F 15 15 04.8#T7..Tl.._..
00000030 0B 0B 08 08 01 19 1B 0C 0C 0C 0D 01 00 00 00 00 ................

the coasters have the following serials:
PAPA24IJ15060230 6
PAPA24IJ15054581 3

one that burned at 4x:
PAPA24IJ15060228 2

i don’t think i will have a good chance with bringing the rest of the spindle back… with this “Super”-Ednuser-support here in germany…

bought the spindle in a small computer-hardware-shop. they are cheap, but leak of good support… it will be hard to explain them, that i hab to use ( of 25 DVDs to realise, that the media is bad. and if they believe it, they would first try for their own, if the media is ok. and if they realise that the poor little rest is not good, (who knows, if another writer would perhaps work)…

i think i will just use the rest with slow write-speeds.

axc27

What about the warranty from Verbatim? Those should carry a lifetime warranty. Those 16X at our stores are made in Singapore, a notch above Taiwan. The pecking order goes like this…Japan, Singapore, Taiwan, and China.

New B7U9 is cool… :slight_smile:

updated firmware yesterday, and tried one more DVD+r of my bad batch. see below. cool. fine burn. i do not understand why cdspeed gives me only 88%, but i see nothing bad in this scan. so either this is the first good DVDR in the 25-spindle (i don’t think so), or the B7U9 gives much better support for the MCC004 made in Taiwan. :smiley:

axc27



In the B7U9 thread there a few of us playing with these MIT MCC004 and have the same results. Best score is 88 or 89, I have 3 at 85 so far. And one from a NEC 3500 at 75. My tests are from 2 spindles MIT from 2 different sources BB and CC in the states

Re: io Magic internal DVD-+RW/=-R 16X DUAL FORMAT DOUBLE LAYER IDVD16DD
Have had good luck with this for about 5 months. Now it will not read any disk except DVD. Will copy CD but cannot verify the copy as the unit cannot read the disk. Allways get the same message " not a Win32 application".
I unloaded the installation and reinstalled but no change. Had to reinstall via HD as installation disk could not be read. I can copy anything off the HD but not disk copy.
Anyone out there having this problem? Need help… ggarmany

Welcome ggarmany. :slight_smile:

What OS are you on and what’s the content on discs not working? Problem with all kind of CD’s?

BTW, this thread is about problems to burn DVD’s…

I have a spindle of MCC-004 Verbatim. For some reason they won’t test on NERO CD-Speed Benchmark. I keep getting referred to “create disc”. What gives?

Steve1942: They might be blank. If you want to make a speed benchmark they need to be filled, or burned to, first.
If your burner isn’t recognizing the discs it has burned before, this is another completely different thing though.