Need help Iâ€™m new at burning DVDâ€™s. Hereâ€™s the problem, I download some Tv episodes in divx form, then converted them to DVD using DIKO, then used DVD Shrink to merge them and finely used Nero to burn them to a DVD. When I played the DVD on a set top player the audio will skip every so often. I played the divx files on my computer and no audio problems, then I played a file after DIKO and no audio problems, then after dvd shrink and again no audio problems, then I took the DVD and played it on my computer and no audio problems. So either Nero is the problem or I don’t know, has anyone had these problem before. Any advice is appreciated. Thanks
If everything’s fine and dandy on your computer before burning, it could definitely be a media problem.
Pop in one of your DVD’s and tell us what the app from http://dvd.identifier.cdfreaks.com says you’ve got for media.
Hey tehGrue I forgot to tell you guys my burner is a NEC 35550a f/w 1.06
here is what dvd identifier says about the media i use
Unique Disc Identifier : [DVD-R:MCC 03RG20 ]
Disc & Book Type : [DVD-R] - [DVD-R]
Manufacturer Name : [Mitsubishi Chemical Corp.]
Manufacturer ID : [MCC 03RG20 ]
Blank Disc Capacity : [2,298,496 Sectors = 4.71 GB (4.38 GiB)]
[ DVD Identifier V4.3.0 - http://DVD.Identifier.CDfreaks.com ]
** INFO : Drive = _NEC DVD_RW ND-3550A - [FW 1.06] - [ATAPI]
** INFO : Write Capabilities = DVD+R DVD+R-DL DVD+RW
** INFO : Write Capabilities = DVD-R DVD-R-DL DVD-RW
** INFO : Disc = [DVD-R:MCC 03RG20 ]
** INFO : Reference Speed : 1x DVD = 1385 kBps
** INFO : An Writeable Disc Is Recommended For Accurate Results
** INFO : Write Speeds (Supported By This Drive On This Disc) Listed Below
** INFO : GET PERFORMANCE Write Speed Descriptor(s)
Descriptor #1 = 22160 kBps (16.00x) - [CLV/Non-Pure CAV]
Descriptor #2 = 16620 kBps (12.00x) - [CLV/Non-Pure CAV]
Descriptor #3 = 11080 kBps ( 8.00x) - [CLV/Non-Pure CAV]
Descriptor #4 = 8310 kBps ( 6.00x) - [CLV/Non-Pure CAV]
Descriptor #5 = 5540 kBps ( 4.00x) - [CLV/Non-Pure CAV]
Descriptor #6 = 2770 kBps ( 2.00x) - [CLV/Non-Pure CAV]
** INFO : MODE SENSE Write Speed Descriptor(s) [Legacy Command]
** WARNING : MODE SENSE Is Obsolete And Not Always Properly Supported
Descriptor #1 = 8467 kBps ( 6.00x) - [CLV/Non-Pure CAV]
Descriptor #2 = 7056 kBps ( 5.09x) - [CLV/Non-Pure CAV]
Descriptor #3 = 5645 kBps ( 4.00x) - [CLV/Non-Pure CAV]
Descriptor #4 = 4234 kBps ( 3.06x) - [CLV/Non-Pure CAV]
Descriptor #5 = 2822 kBps ( 2.00x) - [CLV/Non-Pure CAV]
Descriptor #6 = 1411 kBps ( 1.00x) - [CLV/Non-Pure CAV]
Hope thats what you needed
Hmm, that’s some great media you’ve got there, that probably isn’t the problem.
I’m not sure. Maybe the DVD player doesn’t do 100% great on MP2 audio? Most converters use it, but it’s not technically in spec… But other than that I don’t have any great ideas.
Which audio settings were used?
The audio encoder was BeSweet (MP2) the bitrate for 2.0 audio is 160 and 384 for 5.1. Aslo says audio extraction Tool is AVI2WAV can also use VirtualDubMod.
Mh, that leaves the issue to the standalone, maybe.
Just an update I converted the file again using Avi2DVD and they work fine now thanks everyone that helped.