Atapi Dvd A Dh20a4p Scsi CdRom Device

vbimport

#1

I have ATAPI DVD A DH20A4P SCSI CdRom Device
I tried to burn dvd with nero, ashampoo etc with all kinds of programs but i cant burn.
@nero it says disc-at-once failed
do i need firmware updates or what ?
I searched this forum and found 20A4P.9P54.stock firmware but it says
This Firmware is only for a ATAPI DVD A DH20A4P ???
mine is also ATAPI DVD A DH20A4P SCSI CdRom Device
I am really stuck please help me :frowning: :sad:


#2

[QUOTE=DjProgressive;2074049]I have ATAPI DVD A DH20A4P SCSI CdRom Device
I tried to burn dvd with nero, ashampoo etc with all kinds of programs but i cant burn.
@nero it says disc-at-once failed
do i need firmware updates or what ?
I searched this forum and found 20A4P.9P54.stock firmware but it says
This Firmware is only for a ATAPI DVD A DH20A4P ???
mine is also ATAPI DVD A DH20A4P SCSI CdRom Device
I am really stuck please help me :frowning: :sad:[/QUOTE]

Hi DjProgressive,
do you have installed Daemoon Tools, Alcohol 120 or another virtual drive software?


#3

I only have Daemon Tools


#4

[QUOTE=DjProgressive;2074091]I only have Daemon Tools[/QUOTE]
Could you disable/uninstall it and then try if the burning works?


#5

ok I uninstalled the daemon but still same error
couldn not perform discatonce
here is error logi recieved 1 minute ago:

DjProgressive

Windows XP 6.0
IA32
WinAspi: -
ahead WinASPI: File 'F:\Program Files\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=169792 bytes, created 04.05.2007 10:35:40 

NT-SPTI used
Nero Version: 7.5.13.1
Internal Version: 7, 5, 13, 1
 (Nero Express)
Recorder:             <ATAPI DVD A  DH20A4P>    Version: NP53 - HA 1 TA 0 - 7.5.13.1
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ?
CD-ROM:               <ATAPI    DVD A  DH20A4P  >Version: NP53 - HA 1 TA 0 - 7.5.13.1
 Adapter driver:      <IDE>                     HA 1

=== Scsi-Device-Map ===
ArrayPeripheral      : MARVELL Virtual Device  1.00    mv61xx Port 4 ID 25 DMA: Off
CdRomPeripheral      : ATAPI   DVD A  DH20A4P  NP53    mv61xx Port 4 ID 4  DMA: Off

=== CDRom-Device-Map ===
ATAPI DVD A  DH20A4P       G:   CDRom0
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
BUFE           : 0
Physical memory     : 2028MB (2077644kB)
Free physical memory: 1320MB (1351696kB)
Memory in use       : 34 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

9.6.2008
ISO compilation
22:27:37	#1 Text 0 File SCSIPTICommands.cpp, Line 411
	LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	
22:27:38	#2 Text 0 File Isodoc.cpp, Line 6517
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : TRUE
	Multisession            : FALSE
	Burning mode            : DAO
	Mode                    : 1
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  : TRUE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path  : TRUE
	Write ISO9660 ;1 file extensions        : TRUE
	
22:27:38	#3 ISO9660GEN -11 File Geniso.cpp, Line 3332
	First writeable address = 0 (0x00000000)
	
22:27:38	#4 Text 0 File Burncd.cpp, Line 3467
	Turn on Disc-At-Once, using DVD media
	
22:27:38	#5 Text 0 File DlgWaitCD.cpp, Line 306
	Last possible write address on media:  2295103 (510:01.28, 4482MB)
	Last address to be written:            2154463 (478:46.13, 4207MB)
	
22:27:38	#6 Text 0 File DlgWaitCD.cpp, Line 318
	Write in overburning mode: NO (enabled: CD)
	
22:27:38	#7 Text 0 File DlgWaitCD.cpp, Line 2929
	Recorder: ATAPI DVD A  DH20A4P, Media type: DVD+R
	 Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
	 Disc Application Code: 0, Extended Information Indicators: 7
	
22:27:38	#8 Text 0 File DlgWaitCD.cpp, Line 490
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
22:27:38	#9 Text 0 File ThreadedTransferInterface.cpp, Line 792
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 2154464 (2154464) = #2154464/478:46.14
	    relocatable, disc pos for caching/writing not required/ required
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2154464 blocks [G: ATAPI DVD A  DH20A4P]
	--------------------------------------------------------------
	
22:27:38	#10 Text 0 File ThreadedTransferInterface.cpp, Line 995
	Prepare [G: ATAPI DVD A  DH20A4P] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:                                  Idx 0         Idx 1      Next Trk
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4412342272, ISRC ""
	DAO layout:
	===========
	 ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
	        0 |  lead-in |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   0 |    0x41 |  2154464 |        0 | 0x00
	        0 |        1 |   1 |    0x41 |  2154464 |        0 | 0x00
	  2154464 | lead-out |   1 |    0x41 |        0 |        0 | 0x00
	
22:27:38	#11 Text 0 File SCSIPTICommands.cpp, Line 209
	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
	
22:27:38	#12 Phase 24 File dlgbrnst.cpp, Line 1760
	Caching of files started
	
22:27:38	#13 Text 0 File Burncd.cpp, Line 4351
	Cache writing successful.
	
22:27:38	#14 Phase 25 File dlgbrnst.cpp, Line 1760
	Caching of files completed
	
22:27:38	#15 Phase 36 File dlgbrnst.cpp, Line 1760
	Burn process started at 8x (11.080 KB/s)
	
22:27:38	#16 Text 0 File ThreadedTransferInterface.cpp, Line 2712
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
22:27:38	#17 Text 0 File Cdrdrv.cpp, Line 9261
	---- DVD Structure: Physical Format Information (00h) ----
	Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD+R (10), Part Version: 1.0x (1)
	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:      26053F h
	 End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	  Disc Application Code: 0 / 0 h
	  Extended Information indicators: 7 h
	  Disc Manufacturer ID: MCC.....
	  Media type ID: 004
	  Product revision number: 0
	  Number of Physical format information bytes in use in ADIP up to byte 63: 56
	 Media Specific [16..63]:
	    00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38    ...MCC.....004.8
	    23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08    #T7..Tl.._......
	    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00    ................
	
22:27:38	#18 Text 0 File DVDR.cpp, Line 6869
	Drive: ATAPI    DVD A  DH20A4P  
	Book Type request [LO], rev 3: DVD-ROM
	Changing the Book Type was finished successfully, return code 0
	
22:27:38	#19 CDR -1211 File DVDR.cpp, Line 6227
	Book Type set to: DVD-ROM
	
22:27:38	#20 Text 0 File DVDPlusRW.cpp, Line 674
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
22:27:49	#21 SPTI -1114 File SCSIPassThrough.cpp, Line 179
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114)
	Sense Key:  0x06 (KEY_UNIT_ATTENTION)
	Sense Code: 0x29
	Sense Qual: 0x00
	CDB Data:   0x2A 00 00 00 00 00 00 00 20 00 00 00 
	Sense Area: 0x08 00 06 00 00 00 00 0A 00 00 00 00 29 
	Buffer x22030040: Len x10000
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	
22:27:49	#22 CDR -1114 File Writer.cpp, Line 299
	Reset occurred
	G: ATAPI DVD A  DH20A4P
	
22:27:49	#23 SPTI -1033 File SCSIPassThrough.cpp, Line 179
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1033)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x04
	Sense Qual: 0x01
	CDB Data:   0x35 02 00 00 00 00 00 00 00 00 00 00 
	Sense Area: 0x08 00 02 00 00 00 00 0A 00 00 00 00 04 01 
	
22:27:49	#24 SPTI -1033 File SCSIPassThrough.cpp, Line 179
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1033)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x04
	Sense Qual: 0x01
	CDB Data:   0x5B 01 05 00 00 00 00 00 00 00 00 00 
	Sense Area: 0x08 00 02 00 00 00 00 0A 00 00 00 00 04 01 
	
22:27:49	#25 Phase 127 File dlgbrnst.cpp, Line 1760
	Generating DVD high compatibility borders
	
22:28:03	#26 Text 0 File DVDR.cpp, Line 6869
	Drive: ATAPI    DVD A  DH20A4P  
	Book Type request [LO], rev 3: DVD+R
	Changing the Book Type was finished successfully, return code 0
	
22:28:03	#27 CDR -1033 File WriterStatus.cpp, Line 162
	Drive not ready
	G: ATAPI DVD A  DH20A4P
	
22:28:03	#28 TRANSFER -24 File WriterStatus.cpp, Line 162
	Could not perform end of Disc-at-once
	
22:28:03	#29 Phase 38 File dlgbrnst.cpp, Line 1760
	Burn process failed at 8x (11.080 KB/s)
	
22:28:03	#30 Text 0 File SCSIPTICommands.cpp, Line 254
	SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
	
22:28:05	#31 Text 0 File Cdrdrv.cpp, Line 10538
	DriveLocker: UnLockVolume completed
	
22:28:05	#32 Text 0 File SCSIPTICommands.cpp, Line 411
	UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=6.4.645.100 (NT.051018-1332), size=98408 bytes, created 02.11.2006 12:50:35 
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 05.10.2006 05:42:42 
File 'Drivers\PXHELP20.SYS': Ver=3.00.67a, size=43872 bytes, created 23.02.2008 05:38:33 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 1 (Security Option) 



#6

Your DMA is off, you have a virtual device and your firmware is ancient.


#7

ok i dont know what is all this means and i cannot find any firmware :frowning:
Please explain me more what to do how to turn On and uninstall or disable that virtual thingy
Thanks


#8

here is info on your virtual device:http://www.homeserverhacks.com/2007/12/updated-marvell-virtual-device-driver.html


#9

I think that Marvell Virtual Device is a RAID array. If you are not running a RAID array, go into your BIOS and see if you can disable the RAID functionality.

Specifically, do you know what motherboard you have? Or what system do you have?

If at all possible, update the drivers for all your IDE and SATA controllers. For whatever reason, the PATA DH20A4P is being recognized as an SATA device. Also, Nero is reporting your DMA is disabled.
Updating drivers for the SATA and/or IDE controllers may fix this.

Also, you have the right idea of trying to update the firmware, but there is a special way you have to do it. Long story short, you have NPxx versioning firmware, and the LiteOn flasher is looking for 9Pxx versioning. Update your firmware using the 9P54 stock you found along with the Flash Utility [one of the Read Firsts in this forum]. Open Flash Utility, click Read Flash, and type in a filename to back up your current firmware. Let that finish, then click Write Firmware, find the 9P54 stock .EXE file you downloaded, select that, and flash away. You should end up with 9P54. Reboot, and try again.


#10

ok I will do what you say thanks
and my motherboard is
Intel Shrewsbury DG965SS
and mine is NP53
ok let me try to update firmware with flash and tell you how it go


#11

ok when writing comes to 30% it says Error Writing FLASH to Drive!
and my dvd rom dissapears from My Computer and Device Manager… :S


#12

Oh, dear. The drive is dead, but can be recovered in your computer or another computer in DOS mode. Did you backup your firmware?

We’ll get back to the issue with the drive in Windows after we get the drive back alive. :wink:

BTW, how is the drive connected? As in, is the drive set as Master or Slave, and is the PATA cable used to connect it old or new?


#13

Hi,[quote=pfloyd1;2074147]Your DMA is off, [/quote]sigh
No. Nero does not report DMA state for drives that are not connected to controllers that use drivers from the manufacturer.

[quote=Albert;2074162] For whatever reason, the PATA DH20A4P is being recognized as an SATA device. [/quote]No, it is not. All drives connected to a PCI or PCIe IDE (or Sata) controller are equal in that aspect.

Also, Nero is reporting your DMA is disabled.
Normal. Nero only detects DMA state with Atapi.sys.

Updating drivers for the SATA and/or IDE controllers may fix this.
No. Not at all, unless the controller the drive is connected to, can be operated with Windows-built-in generic driver (atapi.sys).

Michael