Artec WSM-52Z

vbimport

#1

I have this CD burner on my PC. Have searched high and low for firmware updates for this specific model number. Have found some FW for “WSM-wrong number”. Have found updates for “wrong letters-52Z”. Have searched on rpc1.org and Google. Current FW version is 1.10

Nothing seems to match exactly. Does a firmware update even exist? Any help would be appreciated! Even to confirm that there is nothing newer.

Thanks. Richard.


#2

None there, sorry: http://info.ultima.com.tw/fae/Service_e/nl/home/firmware.asp.htm

also here:
http://forum.rpc1.org/dl_firmware.php?category=6&manufactor=47

Please use Discinfo and post the smmary output here.
http://hijacker.rpc1.org/discinfo/


#3

Hi -

I had been to the ultima and rpc1 sites with no luck. The best I found were the non-matching model names.

Took a read with DiscInfo and got the following:

DISCINFO VERSION : 1.6.1.6
VENDOR :
MODEL : WSM-52Z
REVISION : 1.10
VENDOR SPECIFIC : UECRW5203052

LOADING MECHANISM : Tray
NUMBER VOL. LEVELS : 256
BUFFER SIZE : 2048KB
INTERFACE : ATAPI
RPC2 SCHEME : NO
ANALOG AUDIO PLAY : YES
COMPOSITE OUTPUT : NO
DIGITAL PORT-PORT1 : NO
DIGITAL PORT-PORT2 : NO
READ UPC CODE : YES
MULTISESSION READ : YES
MODE 2 FORM 1 : YES
MODE 2 FORM 2 : YES
READ ISRC CODE : YES
READ BAD CODE : NO
BUFFER UNDER-RUN : YES
MT. RAINIER : YES
CAN READ CDR : YES
CAN READ CDRW : YES
CAN READ CDRM2 : YES
CAN WRITE CDR : YES
CAN WRITE CDRW : YES
CAN TEST WRITE : YES
CAN READ DVD-ROM : NO
CAN READ DVD-R : NO
CAN READ DVD-RW : NO
CAN READ DVD-RAM : NO
CAN READ DVD+R : NO
CAN READ DVD+RW : NO
CAN WRITE DVD-R : NO
CAN WRITE DVD-RW : NO
CAN WRITE DVD-RAM : NO
CAN WRITE DVD+R : NO
CAN WRITE DVD+RW : NO
MAX CDR READ SPEED : 52
MAX CDR WRITE SPEED: 52

Hope you can find something. Thanks!


#4

Found no firmware so far.


#5

Thanks for checking!!

The drive is somewhat old, but works just fine for me. No problems. I do like to have everything up-to-date whenever possible.