Arrgh! Is my hardware giving up on me?

vbimport

#1

G'day!

Just started having problems with my MATSHITA CD-R CW-7502 from 1998. The SCSI card I'm using is the one that followed with the burner and it's a Adaptec AIC-7850 PCI SCSI Controller. It simulates writes alright but when it's time to do the actual writing it craps out with the messeages found in the below provided log file. This has happened to me once or twice before, but this time I've trashed 2 in a row and it's NOT funny anymore!

Is my hardware giving up on me or what?

-------------------------------------------------- Log file starts here...

Windows 98 4.10
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 1999-05-05 22:22:00
Nero Version: 5.5.5.1
Recorder: <MATSHITA CD-R CW-7502> Version: 4.05 - HA 0 TA 6 - 5.5.5.1
Adapter driver: <aic78xx> HA 0
Drive buffer : 868kB
CD-ROM: <PIONEER DVD-ROM DVD-103>Version: 1.15 - HA 1 TA 0 - 5.5.5.1
Adapter driver: <ESDI_506> HA 1
PIONEER DVD-ROM DVD-103 (Target 0, F:): Autoinsert On, DMA Off, Disconnect ?, SyncDataXfer ?
MATSHITA CD-R CW-7502 (Target 6, E:): Autoinsert On, DMA ?, Disconnect ?, SyncDataXfer ?
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 34603008 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 0MB (72kB)
Memory in use : 57 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry: 1
Wizard: Off

CD-ROM (ISO)
2.6.2002

19:01:23 #1 Text 0 File Reader.cpp, Line 117
Reader running

19:01:23 #2 Text 0 File Writer.cpp, Line 122
Writer CD-R CW-7502 running

19:01:23 #3 ISO9660GEN -11 File geniso.cpp, Line 4226
First writeable address = 0 (0x00000000)

19:01:23 #4 Text 0 File ThreadedTransferInterface.cpp, Line 668
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 357734 (357734) = #357734/79:29.59
relocatable, CD pos for caching/writing not required/required, no patch infos


19:01:26 #5 Text 0 File DlgWaitCD.cpp, Line 1199
Recorder: MATSHITA CD-R CW-7502;
CDR code: 00 97 27 56; OSJ entry from: Mitsui Chemicals, Inc.
ATIP Data:
Special Info [hex] 1: C0 00 80, 2: 61 1B 38 (LI 97:27.56), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

19:01:28 #6 Text 0 File ThreadedTransferInterface.cpp, Line 803
Prepare recorder CD-R CW-7502 for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close CD
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 732946432

19:01:28 #7 Text 0 File ThreadedTransferInterface.cpp, Line 831
Removed 2 run-out blocks from end of track 1.

19:01:28 #8 Text 0 File ThreadedTransferInterface.cpp, Line 668
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 357734 (357734) = #357734/79:29.59
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 357732 blocks [CD-R CW-7502 ]


19:01:28 #9 Phase 24 File dlgbrnst.cpp, Line 1426
Caching of files started

19:01:34 #10 Phase 25 File dlgbrnst.cpp, Line 1426
Caching of files completed

19:01:34 #11 Phase 28 File dlgbrnst.cpp, Line 1426
Speed measurement started

19:01:34 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1844
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

19:03:20 #13 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion

19:03:20 #14 Phase 29 File dlgbrnst.cpp, Line 1386
Speed measurement completed: 44x (6720 KB/s)

19:03:20 #15 Phase 32 File dlgbrnst.cpp, Line 1426
Simulation started at 4x (600 KB/s)

19:03:21 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1844
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

19:23:21 #17 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion

19:23:29 #18 Phase 33 File dlgbrnst.cpp, Line 1426
Simulation completed successfully at 4x (600 KB/s)

19:23:57 #19 Text 0 File DlgWaitCD.cpp, Line 1199
Recorder: MATSHITA CD-R CW-7502;
CDR code: 00 97 27 56; OSJ entry from: Mitsui Chemicals, Inc.
ATIP Data:
Special Info [hex] 1: C0 00 80, 2: 61 1B 38 (LI 97:27.56), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

19:23:57 #20 Phase 36 File dlgbrnst.cpp, Line 1426
Burn process started at 4x (600 KB/s)

19:23:58 #21 Text 0 File ThreadedTransferInterface.cpp, Line 1844
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

19:25:59 #22 TRANSFER -25 File Reader.cpp, Line 344
Error reading Data

19:26:02 #23 SCSI -1135 File Cdrdrv.cpp, Line 1325
SCSI Exec, HA 0, TA 6, LUN 0, buffer 0x036FF608
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x07
CDB Data: 0x2A 0x00 0x00 0x00 0x70 0xDC 0x00 0x00 0x1F 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x07

19:26:02 #24 mmc -1135 File Writer.cpp, Line 308
Write error

19:26:02 #25 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion

19:26:02 #26 CDR -201 File WriterStatus.cpp, Line 183
Invalid writestate

19:26:02 #27 TRANSFER -18 File WriterStatus.cpp, Line 183
Could not perform EndTrack

19:26:02 #28 SCSI -1023 File Cdrdrv.cpp, Line 1121
SCSI Exec, HA 0, TA 6, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x5B 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00

19:26:02 #29 mmc -1023 File WriterStatus.cpp, Line 222
Command sequence error

19:26:02 #30 TRANSFER -19 File WriterStatus.cpp, Line 222
Could not perform Fixation

19:26:02 #31 Text 0 File WriterStatus.cpp, Line 231
falling back to disc fixation

19:26:02 #32 SCSI -1023 File Cdrdrv.cpp, Line 1121
SCSI Exec, HA 0, TA 6, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x5B 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00

19:26:02 #33 mmc -1023 File WriterStatus.cpp, Line 222
Command sequence error

19:26:02 #34 TRANSFER -19 File WriterStatus.cpp, Line 222
Could not perform Fixation

19:26:02 #35 Phase 38 File dlgbrnst.cpp, Line 1426
Burn process failed at 4x (600 KB/s)

19:26:02 #36 Text 0 File Scsicmd.cpp, Line 371
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated

Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 1999-05-05 22:22:00
File 'IoSubsys\NEROCD95.VXD': Ver=4, 5, 0, 10, size=37493 bytes, created 2002-06-02 15:16:18
File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 1999-05-05 22:22:00
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 1999-05-05 22:22:00
File '..\System\Vmm32\Ios.vxd': Ver=4.10.2222, size=69578 bytes, created 1999-05-05 22:22:00
File 'IoSubsys\Disktsd.vxd': Ver=4.10.2222, size=18809 bytes, created 1999-05-05 22:22:00