AnyDVD HD 6.4.9.1 BETA Discussion Thread

vbimport

#1

Safe for everyone to try:

http://sandbox.slysoft.com/beta/SetupAnyDVD6491.exe

6.4.9.1 2008 12 13

  • New: Added functionality for better integration with MyMovies
  • New (HD DVD & Blu-ray): If automatic update check is enabled,
    AnyDVD will no longer ask for permission to connect to the key server
  • Fix (HD DVD & Blu-ray): Creating protected images didn’t work,
    if AACS or BD+ couldn’t be decrypted
  • Fix (Blu-ray): “Old” BD+ wasn’t removed with some discs, e.g.
    “Horton Hears a Who”, Hong Kong and Europe
  • Fix (DVD): Some extras were accidentally removed from some discs, e.g.
    video introduction to deleted scenes on Wall-E, US
  • Some minor fixes and improvements
  • Updated languages

#2

So did they have fix for The Dark Knight R1 yet in the latest beta? Cause I backup the dvd without foreign language.


#3

That’s a CloneDVD issue, NOT an AnyDVD problem. So no.


#4

I thought it had something to do with the encryption from Anydvd that didn’t allow for complete backup using CloneDVD.


#5

[QUOTE=coolcolors;2176085]I thought it had something to do with the encryption from Anydvd that didn’t allow for complete backup using CloneDVD.[/QUOTE]

No, as was stated by myself and SamuriHL, AnyDVD fully handled the disc since the beginning.

The issue is purely on CloneDVD’s end. If you do a full-disc rip with CloneDVD and do not transcode to DVD5 then the error never occurs.


#6

No, as DrinkLyeOrDie stated, the issue is CloneDVD’s transcoder engine not being able to handle this disc when transcoding from DVD9->DVD5 using the full disc contents. It is able to handle it when you remove some content. It has nothing to do with AnyDVD whatsoever.


#7

Coolcolors
I’m not sure if this has been mentioned
if you have cloneCD
it along with AD will make a complete backup - A true clone
That can then be burnt to a Dual layer disk


#8

I be doing that next soon here.


#9

[QUOTE=zaq;2176231]Coolcolors
I’m not sure if this has been mentioned
if you have cloneCD
it along with AD will make a complete backup - A true clone
That can then be burnt to a Dual layer disk[/QUOTE]You have to have backup software for your backup software :smiley:


#10

Well looks like the newest Mummy BluRay is also one of those that AnyDVD-HD 6.4.9.1 cannot rip…
I’m thinking that the word is going to get out and all the studios will start using this new BD+…
Last week was 20th Century Fox’s ‘Horton’… and this week Universal’s ‘Mummy’


#11

Incorrect, MBK. :slight_smile: Universal doesn’t use BD+. They’re possibly using a new MKB, though. Post a log and I can take a look if you’d like.


#12

[QUOTE=SamuriHL;2178195]Incorrect, MBK. :slight_smile: Universal doesn’t use BD+. They’re possibly using a new MKB, though. Post a log and I can take a look if you’d like.[/QUOTE]

Sure, what log?

AnyDVD-HD status…

Summary for drive G: (AnyDVD 6.4.9.1)
HL-DT-ST BDDVDRW GGC-H20L 1.03 400515081A87AD1455
Drive (Hardware) Region: 0 (not set!)

Media is a Blu-Ray disc.

Total size: 22260288 sectors (43477 MBytes)
Video Blu-ray label: MUMMY_3TODE
Media is AACS protected!
Problem connecting to AnyDVD update server!
ERROR processing Blu-ray disc!


#13

Right click the AnyDVD icon and run the Create logfile… option. It’ll tell you where it puts the log. Attach it here and I’ll take a look to see what you’re dealing with.


#14

[QUOTE=SamuriHL;2178201]Right click the AnyDVD icon and run the Create logfile… option. It’ll tell you where it puts the log. Attach it here and I’ll take a look to see what you’re dealing with.[/QUOTE]

OK… which text?

This??..
AnyDVD 6.4.9.1

track 1 from 0 to 22260288, Control 4
Drive 0 (not set!)
read physical failed, sense 5:30:2
dvd-rom version 0 120mm 2.52mbps parallel
Layer 0 End: 0
read copyright failed, sense 5:30:2
layer 1 reserved free
standard udf
label MUMMY_3TODE
AACS!
HD type: 1
MKB version 9
84c14d313e97
380d63c71324
HD: GetVolumeKey 0
GetVolumeID failed, sense 5:6f:2
HD:
BD;MUMMY_3TODE|6.4.9.1;84c14d313e97;;9
29 99 de bc d9 9f 96 79 7c 84 d4 9c a4 9d b9 27
2999debcd99f96797c84d49ca49db927
yes_clicked: 1, server_error: -1
path /VIDEO_TS/VIDEO_TS.IFO
set streaming failed, sense 5:21:0
Sending Patchlevel 1
mode 0 0x0


#15

Not text. Attach the zip file here as an attachment. I need to check a couple things for you and they’ll all be contained in the zip file.


#16

[QUOTE=SamuriHL;2178208]Not text. Attach the zip file here as an attachment. I need to check a couple things for you and they’ll all be contained in the zip file.[/QUOTE]

Zip is too large to attach/


#17

Ah, ok. Post the contents of the anydvd status then. That should give me somewhat of a clue. I can try and go from that.


#18

[QUOTE=SamuriHL;2178210]Ah, ok. Post the contents of the anydvd status then. That should give me somewhat of a clue. I can try and go from that.[/QUOTE]

I added that to post #12… and that’s all that’s in the status log.

Summary for drive G: (AnyDVD 6.4.9.1)
HL-DT-ST BDDVDRW GGC-H20L 1.03 400515081A87AD1455
Drive (Hardware) Region: 0 (not set!)

Media is a Blu-Ray disc.

Total size: 22260288 sectors (43477 MBytes)
Video Blu-ray label: MUMMY_3TODE
Media is AACS protected!
Problem connecting to AnyDVD update server!
ERROR processing Blu-ray disc!


#19

[QUOTE=MBK;2178200]Sure, what log?

AnyDVD-HD status…

Summary for drive G: (AnyDVD 6.4.9.1)
HL-DT-ST BDDVDRW GGC-H20L 1.03 400515081A87AD1455
Drive (Hardware) Region: 0 (not set!)

Media is a Blu-Ray disc.

Total size: 22260288 sectors (43477 MBytes)
Video Blu-ray label: MUMMY_3TODE
Media is AACS protected!
Problem connecting to AnyDVD update server!
ERROR processing Blu-ray disc![/QUOTE]

a) Ensure Anydvd is running.
b) Put the problematic original movie dvd in your burner. Wait for Anydvd to scan the disc.
c) Right click the red fox icon on your toolbar.
d) Select "Create Logfile"
e) Wait for Anydvd to create a log file.
f) A pop-up screen will appear. Take note of the location where Anydvd created the logfile and the logfile’s name. Click “ok”.
g) Go to your My Documents folder
h) You will see a zip file called “Anydvd_Info_titleofmydisc.zip” (or something similar; see step f)
i) When replying or posting in the Slysoft forums, look for the icon that looks like (in other words, look for the paperclip after clicking “quote” or when creating a new thread)
j) If you don’t see that paperclip icon, click the “go advanced” button. You should see that icon now. Click the paperclip.
k) A small pop-up screen should appear (if it doesn’t please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
l) Click the “Browse” button, and locate and select the .zip file you created.
m) click "upload"
n) Close the window. When you submit reply, or submit a new thread, the .zip file will be attached automatically for us to take a look at


#20

Thanks. This is bad:

HD: GetVolumeKey 0
GetVolumeID failed, sense 5:6f:2
HD:
BD;MUMMY_3TODE|6.4.9.1;84c14d313e97;;9
29 99 de bc d9 9f 96 79 7c 84 d4 9c a4 9d b9 27
2999debcd99f96797c84d49ca49db927
yes_clicked: 1, server_error: -1

I’m not sure what happened there. You’re not running a trial or anything right? What that means is it tried to get the title key from the server and failed. And I’m not sure why. This is not a BD+ problem or an MKB problem. It’s just a key that’s not in the database that couldn’t be retrieved from the server.