Ahhhh ... power collaberation error?

beecue 2005-07-22 11:46:06 UTC #1

hey i just tried to burn a dvd and it did this ... first time ever ... i dunno wat it is .. help please .. thx

phil1 2005-07-22 12:05:22 UTC #2

basicly there are 3 possible reasons for it to happen,the first one is most common
a) the burner dont like the media,firmware upgrading might resolve it and if not then using another media brand will
b) power supply providing too low voltages
c) burner's laser unit is dirty and needs to be cleaned with compressed air

nero burning log may provide the accurate reason
open C:\Program Files\Ahead\Nero\NeroHistory.log and copy & paste the latest one but dont include nero's serial

edit: btw why 2x? your burner supports 8x so its better to use higher speed if the media supports it,2x medias arent easy to find

VirusHack 2005-07-22 12:10:39 UTC #3

As far as I know, this is mainly due to cheap media. Try changing brands?

\\VH////

beecue 2005-07-22 12:22:05 UTC #4

ok ... i tried it like 4 times and it didnt work .. then i shut down and now i think it works .. the burn is not done yet ... i burn at 2x cuz i was having problems last week .. but that was cuz my hdds were fragmented .. so i still just use 2x ... and im using ridata .. have been using ridata for many months wit no problem ... unless its because its full face printables .. i dunno ... heres the log ... oh and how would i clean the laser .. i have some compressed air ... thx

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15e

Recorder: <SONY DVD RW DRU-530A> Version: 2.1g - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD RW DRU-530A >Version: 2.1g - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6E030L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DRU-530A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4480B atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
SONY DVD RW DRU-530A F: CDRom0
HL-DT-ST RW/DVD GCC-4480B G: CDRom1
Generic DVD-ROM H: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 38797312 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 239MB (245232kB)
Free physical memory: 61MB (63332kB)
Memory in use : 74
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

22.7.2005
Burn DVD Image
12:44:42 PM #1 Text 0 File Reader.cpp, Line 127
Reader running

12:44:42 PM #2 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-530A running

12:44:42 PM #3 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media

12:44:42 PM #4 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2248655 (499:42.05, 4391MB)

12:44:42 PM #5 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)

12:44:42 PM #6 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: SONY DVD RW DRU-530A, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193

12:44:42 PM #7 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:44:42 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2248656 (2248656) = #2248656/499:42.6
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2248656 blocks [SONY DVD RW DRU-530A]

12:44:42 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [SONY DVD RW DRU-530A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4605247488, ISRC ""
DAO layout:
===========
_Start|___Track|Idx|CtrlAdr|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2248656 | lead-out | 1 | 0x41 | 0x00

12:44:42 PM #10 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

12:44:43 PM #11 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.

12:44:43 PM #12 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

12:44:43 PM #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2,770 KB/s)

12:44:43 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

12:44:43 PM #15 Text 0 File DVDR.cpp, Line 2340
Recording mode: Sequential Recording Mode

12:44:43 PM #16 Text 0 File Mmc.cpp, Line 21627
Set BUFE: Power-Burn -> ON

12:44:43 PM #17 Text 0 File DVDR.cpp, Line 2494
Start write address at LBA 0
DVD high compatibility mode: Yes

12:44:43 PM #18 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

12:45:46 PM #19 SCSI -1106 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04540000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03

12:45:46 PM #20 CDR -1106 File Writer.cpp, Line 311
Power calibration error

12:45:46 PM #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

12:45:46 PM #22 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

12:45:46 PM #23 Text 0 File DVDR.cpp, Line 2732
EndDAO: Last written address was 31

12:45:46 PM #24 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2x (2,770 KB/s)

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 4:28:13 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 2:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

TimC 2005-07-22 13:08:43 UTC #5

The Ritek G05 printables are nowhere near the quality of earlier batches. I threw most of mine away.

An 8x rated disk is not going to like being written at 2x. The writer firmware will not be optimised for such a slow speed.

Hopefully by now you've defragged your HD.

harley2ride 2005-07-22 13:40:57 UTC #6

Also, what TIMC is hinting at, is that you should first try to burn a given media at it's rated speed, run nero cd/dvdspeed for a quality test, and then possibly try a burn at 2x lower (ie: 8x at 6x, or 16x at 12x), to see if your particular burner/firmware combination prefer burning a given media at a little lower speed. It is not recommended at all to burn way lower than a medias rated speed. If you insist on burning at slow speeds, you need to buy a slower speed burner (ie: 4x burner, 8x burner). That is how most of us learned what speeds to burn different medias at, and which burners prefer certain brands and types of media.

beecue 2005-07-23 11:46:37 UTC #7

ok ... i will burn at 4x ... dam it .. i think i did wrong test.. well here is info for the test i did ...
General Information
Operating System Windows XP
Drive SONY DVD RW DRU-530A
Firmware Version 2.1g
Serial Number
Disc Blank DVD
MID RITEKG05
Capacity 4.38 GB

Transfer Rate
Start 4.03x
End 4.04x
Average 4.13x
Type Z-CLV

Log
Time Elapsed Action
[12:24:56] Starting Transfer Rate Test
[12:39:16] 14:20 Speed:4-4 X Z-CLV (4.13 X average)