Ad-7170a

vbimport

#1

i’ve tried other than nero.
i’ve cleaned the dvd.
i’ve even patched the firmware.
i was able to burn cd (not dvd).
i’ve tried so many medias.

i thought here i’d get the final answer.
that’s my nero’s error log.

Nero 8.2.8.0
Ahead Software

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.3.2.1
Internal Version: 8, 3, 2, 1

Recorder: <Optiarc DVD RW AD-7170A> Version: 1.85 - HA 1 TA 0 - 8.3.2.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <CV1153Q OPM214R >Version: 1.0 - HA 1 TA 1 - 8.3.2.1
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : Optiarc DVD RW AD-7170A atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD3200KS-00PFB0 atapi Port 4 ID 0 DMA: On
DiskPeripheral : WDC WD1600JS-00MHB0 atapi Port 4 ID 1 DMA: On
DiskPeripheral : Maxtor 6L160M0 atapi Port 5 ID 1 DMA: On
CdRomPeripheral : CV1153Q OPM214R 1.0 a45z87ya Port 7 ID 0 DMA: Off

=== CDRom-Device-Map ===
Optiarc DVD RW AD-7170A E: CdRom0
CV1153Q OPM214R Z: CdRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2096172kB)
Free physical memory: 1393MB (1427288kB)
Memory in use : 31 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

15.5.2008
Burn DVD Image
20:41:42 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

20:41:43 #2 SPTI -1080 File SCSIPassThrough.cpp, Line 196
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A
Buffer x00000000: Len x20

20:41:43 #3 SPTI -1080 File SCSIPassThrough.cpp, Line 196
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A
Buffer x00000000: Len x20

20:41:43 #4 SPTI -1080 File SCSIPassThrough.cpp, Line 196
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A
Buffer x00000000: Len x20

20:41:43 #5 SPTI -1080 File SCSIPassThrough.cpp, Line 196
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A
Buffer x00000000: Len x20

20:41:43 #6 SPTI -1080 File SCSIPassThrough.cpp, Line 196
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A
Buffer x00000000: Len x20

20:41:43 #7 Text 0 File Burncd.cpp, Line 3568
Turn on Disc-At-Once, using DVD media

20:41:44 #8 SPTI -1033 File SCSIPassThrough.cpp, Line 196
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1033)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 80 26 66
Buffer x00000000: Len x20

20:41:44 #9 SPTI -1033 File SCSIPassThrough.cpp, Line 196
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1033)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 80 26 66
Buffer x00000000: Len x20

20:41:44 #10 SPTI -1033 File SCSIPassThrough.cpp, Line 196
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1033)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 80 26 66
Buffer x00000000: Len x20

20:41:44 #11 SPTI -1033 File SCSIPassThrough.cpp, Line 196
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1033)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 80 26 66
Buffer x00000000: Len x20

20:41:44 #12 SPTI -1033 File SCSIPassThrough.cpp, Line 196
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1033)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 80 26 66
Buffer x00000000: Len x20

20:42:00 #13 Text 0 File DlgWaitCD.cpp, Line 311
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2033054 (451:47.29, 3970MB)

20:42:00 #14 Text 0 File DlgWaitCD.cpp, Line 323
Write in overburning mode: NO (enabled: CD)

20:42:00 #15 Text 0 File DlgWaitCD.cpp, Line 2932
Recorder: Optiarc DVD RW AD-7170A, Media type: DVD-R
Disc Manufacturer ID: <CMC MA> <G. AM3>
Disc Application Code: 64, Disc Physical Code: 193

20:42:00 #16 Text 0 File DlgWaitCD.cpp, Line 497
>>> Protocol of DlgWaitCD activities: <<<
=========================================

20:42:00 #17 Text 0 File ThreadedTransferInterface.cpp, Line 754
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 2033055 (2033055) = #2033055/451:47.30
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2033055 blocks [E: Optiarc DVD RW AD-7170A]
--------------------------------------------------------------

20:42:01 #18 Text 0 File ThreadedTransferInterface.cpp, Line 956
Prepare [E: Optiarc DVD RW AD-7170A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4163696640, ISRC “”
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2033055 | 2033055 | 0x00
2033055 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

20:42:01 #19 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

20:42:01 #20 Text 0 File Burncd.cpp, Line 4359
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

20:42:01 #21 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

20:42:01 #22 Text 0 File Burncd.cpp, Line 4481
Cache writing successful.

20:42:01 #23 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

20:42:01 #24 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 16x (22,160 KB/s)

20:42:01 #25 Text 0 File ThreadedTransferInterface.cpp, Line 2673
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

20:42:01 #26 Text 0 File DVDR.cpp, Line 3280
Recording mode: Sequential Recording Mode

20:42:01 #27 Text 0 File DVDR.cpp, Line 3434
Start write address at LBA 0
DVD high compatibility mode: Yes

20:42:01 #28 Text 0 File Cdrdrv.cpp, Line 10164
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
Outer Limit of Data Recordable Area: 26127F h
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0, Extended part version: 33
Start PSN of the Extra Border Zone: 2FE10 h
Start PSN of Physical format information blocks in Extra Border Zone: 2FFA0 h
Media Specific [16…783]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`…0@P…!..
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
01 40 C1 FD 9E D8 52 00 - 02 84 0D 12 98 99 90 00 .@…R…
03 43 4D 43 20 4D 41 00 - 04 47 2E 20 41 4D 33 00 .CMC.MA…G…AM3.
05 88 80 00 00 00 02 00 - 06 09 0D 14 98 88 90 00 …
07 88 80 00 00 00 00 00 - 08 07 17 0A 0E 09 04 00 …
09 95 07 0D 0B 88 88 00 - 0A 80 00 00 00 00 10 00 …
0B 06 17 15 B8 99 85 00 - 0C B8 9A 32 03 20 32 00 …2…2.
0D 00 00 D0 00 00 00 00 - 0E 09 1F 39 2F 25 1C 00 …9/%…
0F 50 19 29 19 89 B5 00 - 10 88 84 00 04 00 04 00 .P.)…
11 00 00 00 00 00 00 00 - 12 09 2B 37 2D 29 1B 00 …+7-)…
13 50 1D 2D 1F A6 B5 00 - 14 88 80 00 00 00 00 00 .P.-…
15 00 00 00 00 00 00 00 - 16 0B 45 3D 3B 1F 25 00 …E=;.%.
17 30 25 31 0D 8A B5 00 - 18 88 80 00 00 00 00 00 .0%1…
19 00 00 00 00 00 00 00 - 1A 0C 51 51 51 45 2D 00 …QQQE-.
1B 90 23 2D 19 79 B5 00 - 1C 88 80 00 00 00 00 00 …#-.y…
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

20:42:01 #29 Text 0 File DVDR.cpp, Line 3572
Reserved Track size: 2033056 (1F05A0h, 3970MB) -> return code 0

20:42:01 #30 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

20:42:07 #31 Text 0 File Cdrdrv.cpp, Line 1404
20:42:07.562 - E: Optiarc DVD RW AD-7170A : Queue again later

20:43:13 #32 SPTI -1106 File SCSIPassThrough.cpp, Line 196
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x00000000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

20:43:13 #33 CDR -1106 File Writer.cpp, Line 306
Power calibration error
E: Optiarc DVD RW AD-7170A

20:43:15 #34 Text 0 File DVDR.cpp, Line 3840
EndDAO: Last written address was -1 (FFFFFFFFh)

20:43:18 #35 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 16x (22,160 KB/s)

20:43:18 #36 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

20:43:21 #37 Text 0 File Cdrdrv.cpp, Line 11420
DriveLocker: UnLockVolume completed

20:43:21 #38 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

THANKS!


#2

Welcome to the forum :slight_smile:

I find that media code (CMC MAG. AM3) does best at 8x - have you tried that?


#3

thanks for the replay.
but i’ve tried burning at any speed, and i even try to change the media and then fix the speed again.

still getting power calibration error.
any idea?


#4

Do you have 40 wire IDE cable?? If so please change it to 80 wire and try again, this will fix your problem maybe… If you don’t know what I am talking about then just go to a computer store and ask for an 80 wire IDE cable. :slight_smile:


#5

yeap.
i know what you’re talking about. and i have that wire.
what else? :frowning:


#6

Do you have just nero or do you also have INCD or roxio too??

If you have nero’s INCD please uninstall,it all of it, and any roxio software too


#7

Because your 7170A is broken, Just like mine.
I’ve burn less than 150 dvds within 8 months before it got
power calibration error msg. now can only burn cds.

I guess it’s not very durable.

BTW, I have two 7170A, the newer one is still working.
but maybe not for long.


#8

[QUOTE=affter333;2060812]Because your 7170A is broken, Just like mine.
I’ve burn less than 150 dvds within 8 months before it got
power calibration error msg. now can only burn cds.

I guess it’s not very durable.

BTW, I have two 7170A, the newer one is still working.
but maybe not for long.[/QUOTE]

I have 2 also and have burned over 1000 dvd between the 2 of them and they are running tough I just think sometimes you get a bad drive my first 7200 broke after 3 weeks :confused:


#9

So I guess the faulty rate is pretty high for optiarc 7170A
I’ve already seen several postings related to it’s power calibration issue,
maybe that’s why my local shops/online storestop
selling every optiarc burner.