Accesstek/optorite dd1205/hi-val hdvd12dd

I hve this dvd burner accesstek/optorite dd1205/hi-val hdvd12dd. My problem is once I flashed my firmware from 100i to 120i it now take a long time to copy dvds. The timing went from around 14 minutes for 8x media too 40 minutes. I use the same media as before all my setting are the same. I am also very interested in hacking my 120i to 120e. Please Help :frowning:

Enable DMA?
right above your thread!!

DMA is Enabled and the ASPI are working fine the only thing differant is that the DVD buffer fluctuates over and over again, but the user read buffer levels out at 50%. It use to be the dvd buffer stayed at 100% and the user read buffer fluctuated

Try:
New 80 wire IDE cable.
Defragging your harddrives.

I did all these things and it still burns too slow

I don’t know what your installation configuration is because you didn’t post it.
Try isolating the DVD writer as a master on it’s own IDE channel.
Try installing in a completely different PC and testing there.

Also, what is the MID code of the discs that you are using?

I isolated the DVD writer on its on IDE cable and now have my speed back. It still records Memorex 16x at a speed of 4x insted of 12x which is the max speed od the DVD writer. Here is the media code of the disk

                  Media Information                            

Region information N/A not a DVD-VIDEO
Media code/Manufacturer ID RICOHJPNR03
Media Product Revision Number 04h
Format Capacity Blank Disc
Free Blocks 405405696
Free Capacity 4.38GB(4.70GB)
Book Type DVD+R
Media Type DVD+R
Manufacturer Rated Speed 16.0x 22160KBp
Available Write Descriptor CLV 4.0x 5540KBps
Available Write Descriptor CLV 2.4x 3324KBps
Data area starting sector 30000h
Linear Density 0.267um/bit
Track Density 0.74um/track
Number of Layers 1

                       Complete Media Code                           

00000000 08 02 00 00 A1 0F 02 00 00 03 00 00 00 26 05 3F …&.?
00000010 00 00 00 00 00 00 07 52 49 43 4F 48 4A 50 4E 52 …RICOHJPNR
00000020 30 33 04 38 23 54 37 13 00 44 73 00 84 6D 15 15 03.8#T7…Ds…m…
00000030 0B 0B 08 08 01 19 1B 0C 0C 0C 0D 01 00 00 00 00 …

Optorite needs to update it’s firmware.
The discs are not supported at maximum speed for this writer yet.